XENO XBC206CMLED User manual

313Z
XBC236CMLED/25
XBC206CMLED/25 USER MANUAL
LED Bullet Camera Series
Please read the instructions thoroughly before using the product.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence
of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
This exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
ROHS Announcement
All lead-free products offered by the company comply with the requirements of the European law on the Restriction of
Hazardous Substances (RoHS) directive, which means our manufacture processes and products are strictly
“lead-free” and without the hazardous substances cited in the directive.
The crossed-out wheeled bin mark symbolizes that within the European Union the product must be collected
separately at the product end-of-life. This applies to your product and any peripherals marked with this symbol. Do not
dispose of these products as unsorted municipal waste.
CE Mark
This apparatus is manufactured to comply with the radio interference.
The company does not warrant that this manual will be uninterrupted or error-free. We reserve the right to revise or
remove any content in this manual at any time.
C
CA AU UT TI IO ON N: :
To reduce the risk of electric shock, do not expose the power connections on this apparatus to rain or moisture.
Only operate this apparatus from the type of power source indicated on the label.
The company shall not be liable for any damages arising out of any improper use, even if we have been advised of the possibility of such
damages.
C
CA AU UT TI IO ON N
R
RI IS SK K O OF F E EL LE EC CT TR RI IC C S SH HO OC CK K

OVERVIEW
This high resolution camera contains day and night feature, built-in 35 IR LEDs and IP67 standard
approved waterproof outdoor housing.
FEATURES
1. 520 TV Lines
2. Cable management bracket
3. 0.3 Lux / F2.0, 0 Lux (IR ON)
4. Day and night features for 24-hour surveillance
5. IR distance: up to 25 meters with 35 IR LEDs
6. IP67
PACKAGE CONTENT
IR camera * 1
Bracket * 1
Power & video cable x 1
User Manual * 1
Installation Sticker * 1
SPECIFICATIONS*
MODEL
High Resolution Model
Pick-up Element
1/3" H.R. Color CCD image sensor
Number of Pixels
768(H) x 494(V) <NTSC> / 752(H) x 582(V)) <PAL>
Resolution
520TVL
Min. Illumination
0.3 Lux / F2.0, 0 Lux (IR ON)
IR LED
35 LEDs
IR Effective Range
Up to 25 meters
S/N Ratio
More than 48dB (AGC OFF)
Electronic Shutter
1/50 to 1/100,000 sec.
Lens
F6mm / F2.0
Lens Angle
54°
White Balance
ATW
AGC
Auto
IRIS Mode
AES
IP Rating
IP67
Video Output
1.0 Vp-p composite, 75Ω
Operating Temperature
0 ~40
Power Source (±10%)
DC12V
Current Consumption (±10%)
90mA (IR OFF); 450mA (IR ON)
Weight (g) (±5%)
570
Dimensions (mm)**
142(H) x 75 (Φ)
* The specifications are subject to change without notice.
** Dimensional Tolerance: ± 5mm

INSTALLATION

CONNECTION
1. DC12V Input Terminal
Connect the power terminal of the camera to a DC 12V regulated power supply.
NOTE: Please use the correct power adaptor, DC12V (regulated), to operate this unit. The power
tolerance of this unit is DC12V ± 10%. Above a maximum DC 13.2V power input will damage this
unit.
2. Video Output Connector (VIDEO OUT)
Connect the camera video output and the monitor video input with 75Ω coaxial cable.
NOTE: Ensure the joint in the camera connection cable is in a dry environment.