Xerox ColorQube 8700 User manual

olorQube 8700/8900 v1/v2/v3 Service Manual i
olorQube 8700/8900
v1/v2/v3 onnectKey
Service Manual
April 2013
Updated 9/24/15 DAW

olorQube 8700/8900 v1/v2/v3 Service Manual 5-1
Parts List
In this chapter...
•Serial Number Format
•Using the Parts List
•General Overview
•Duplex Automatic Document Feeder
•Scanner Assembly
•Ink Loader Assembly
•over
•Stapler Assembly
•Left Side Door/ Tray 1
•Imaging
•Paper Path
•Drive
•Electrical
•Exit, Sensors, and Actuators
•Frame
•525-Sheet Feeder
•1800-Sheet Feeder
•Storage art
•Finisher
•Xerox Supplies and Accessories

arts List
ColorQube 8700/8900 v1/v2/v3 Service Manual5-2
erial Number Format
Changes to Xerox products are made to accommodate improved components as they become
available. It is important when ordering parts to include the following information:
• Component's part number
• roduct type or model number
• Serial Number of the printer
The serial numbers are only reset to the starting serial number when the ending serial number is
reached. At that time the revision digit will be rolled. Serial numbers below 10001 are reserved for XOG
Final Integration Center (FIC) sites if re-serialization is needed.
XM Format
roduction Units (M Build)
The nine-digit serial number has the following format:
•SSSSSS
• = Three digit alphanumeric product code
•SSSSSS = Six digit numeric serial number
roduct roduct Code Starting Serial Number Ending Serial Number
8700_X
8700_XJ
8700_XM
DA3 000601 050600
8900_XJ
8900_XM
DA4 100601 125600
• The 8700_X, 8700_XJ and 8700_XM will use the serial number range sequentially.
• The 8900_XJ and 8900_XM will use the serial range sequentially.

arts List
ColorQube 8700/8900 v1/v2/v3 Service Manual 5-3
ASM Format
roduction Units (M Build)
The ten-digit serial number has the following format:
• SSSSSSc
•MMM = Three digit alphanumeric product code
•SSSSSS = Six digit numeric serial number
•c = check digit
Examples
DA3074072
– roduct code for 8700_X printer = DA3
– Serial number for 8700_X = 074072
3271334523
– Mfg Location code for 8900_ASM printer = 327
– Serial number for 8900_ASM = 133452
– Check digit = 3
roduct roduct Code Starting Serial Number Ending Serial Number
8700_ASM DA3 050601 100500
8900_ASM DA4 125601 150500

arts List
ColorQube 8700/8900 v1/v2/v3 Service Manual5-4
Serial Number Location
/N DA3070511
–DA: roduct Code for the ColorQube 8700
–3 = Revision Level
–070511 = Serial Number for ColorQube 8700
ANUFACTURED: July, 2011
S/N: DA3070511
s8900-454

arts List
ColorQube 8700/8900 v1/v2/v3 Service Manual 5-5
sing the Parts List
•D No.: The callout number from the exploded part diagram.
•Name/ Description: The name of the part to be ordered and the number of parts supplied per
order.
•Part Number: The material part number used to order that specific part.
• arts identified throughout this manual are referenced L#.#.#; For example, L3.1.10 means the
part is item 10 of arts List 3.1.
• A black triangle preceding a number followed by a parenthetical statement in an illustrated parts
list means the item is a parent assembly, made up of the individual parts called out in
parentheses.
• The notation “with X~Y” following a part name indicates an assembly that is made up of
components X through Y. For example, “1 (with 2~4)” means part 1 consists of part 2, part 3, and
part 4.
• An asterisk (*) following a part name indicates the page contains a note about this part.
• The notation (NS) next to a part indicates that particular part is not spared, but contained in a kit
or major assembly.
• The notation “J1<>J2 and 2” is attached to a wire harness. It indicates that connector Jack 1 is
attached to one end of the wire harness and connector J2 is attached to the other end that is
plugged into 2.
Note: Only parts showing part numbers are available for ordering by support. arts not showing
part numbers are available on the parent assembly.
Abbreviation Meaning
C C-ring
E E-ring
KL K-clip
S Screw

arts List
ColorQube 8700/8900 v1/v2/v3 Service Manual5-6
eneral Overview
rinter Overview
2
3
4
8
9
3
5
4
5
6 (With , 2)
6
5
2
0
7
9
7
58
s8900-372

arts List
ColorQube 8700/8900 v1/v2/v3 Service Manual 5-7
rinter Overview
Item Description arts List age
1. Duplex Automatic Document Feeder 1.1 page 5-8
2. Scanner Assembly 2.1 page 5-16
3. Ink Loader 3.1 page 5-19
4. Exit, Sensors, and Actuators 11.1 page 5-38
5. Cover 4.1page 5-24
6. Stapler Assembly 5.1 page 5-26
7. Control anel (UI) 4.1 page 5-24
8. Drive 9.1 page 5-34
9. Electrical 10.1 page 5-35
10. Left Side Door/ Tray 1 6.1 page 5-27
11. Frame 12.1 page 5-41
12. Tray 2, 3, 4, 5 13.1
14.1
page 5-43
page 5-48
13. 525- Sheet Feeder 13.1 page 5-43
14. 1800- Sheet Feeder 14.1 page 5-48
15. Storage Cart 15.1 page 5-57
16. Scanner/ DADF Assembly (Customer Replaceable) 2.1 page 5-16
17. Finisher 16.1 page 5-58
18. Horizontal Transport (required for Finisher) 3.1 page 5-19
19. USB ort Cover 4.1 page 5-24

arts List
ColorQube 8700/8900 v1/v2/v3 Service Manual5-8
uplex Automatic ocument Feeder
arts List 1.1 Duplex Automatic Document Feeder (1 of 4)
3
7
21
1
18
17
16
20
12
13
14
11
1
4
10
8
2
22 (with 1-21)
6
5
15
s8 00-237

arts List
ColorQube 8700/8900 v1/v2/v3 Service Manual 5-9
arts List 1.1 Duplex Automatic Document Feeder (1 of 4)
Item Description art Number
1. Rear Cover
2. Rear Side Fence
3. Document Tray
4. Top Cover
5. Side Fence Rack Gear
6. Gear
7. Front Side Fence
8. Sensor BL205319
9. Sensor
10. Inner Tray Cover
11. Sensor
12. Sensor
13. aper resence Sensor Actuator
14. Top Cover Handle
15. 1st Feed Idle Roller Shaft
16. Feed Idle Roller
17. CVT Roller Idle Shaft
18. Scan Timing Sensor Actuator
19. Sensor
20. ickup arking Lever
21. Top Guide Cover
22. Duplex Automatic Document Feeder (RE 1.1, page 4-5) 059K83560