Xiamen Hanin Electronic Technology iT4P User manual

iT4 Series User Manual
Label Printer
iT4 Series User Manual
iT4P iT4X
iT4E iT4S
Xiamen Hanin Electronic Technology Co.,Ltd.
ADD:Room 305A,Angye Building,Pioneering Park,Torch High-tech Zone,Xiamen,China.
TEL:[phone]
FAX:[phone]
WEB:www.idprt.com

iT4 Series User Manual
Rev.1.0
Contents
Manual Information.................................................................................................................................................. 1
Important Safety Instructions....................................................................................................................................2
Chapter 1 Introduction.............................................................................................................................................. 5
1.1 Packing List.................................................................................................................................................. 5
1.2 Appearance and Components.....................................................................................................................6
1.3 Dimension....................................................................................................................................................8
Chapter 2 Specifications............................................................................................................................................9
Chapter 3 Installation & Usage................................................................................................................................12
3.1 Media Loading........................................................................................................................................... 12
3.2 Power Connection..................................................................................................................................... 17
3.3 Peripherals Connection............................................................................................................................. 18
3.4 Detection................................................................................................................................................... 19
3.5 Operation Panel.........................................................................................................................................27
3.6 Basic Function............................................................................................................................................35
Chapter 4 Interface..................................................................................................................................................37
4.1 USB Interface.............................................................................................................................................37
4.2 Other Optional Interfaces..........................................................................................................................38
Chapter 5 Maintenance & Adjustment.................................................................................................................... 40
5.1 Cleaning Media Sensor..............................................................................................................................40
5.2 Cleaning Thermal Print Head.....................................................................................................................40
5.3 Cleaning Roller and/or Paper Path............................................................................................................ 41
Chapter 6 Printer Utility Tool Instructions...............................................................................................................42
6.1 Installation Preparation.............................................................................................................................42
6.2 Usage......................................................................................................................................................... 42
Chapter 7 Seagull Windows Driver Instructions......................................................................................................55
7.1 Introduction...............................................................................................................................................55
7.2 Installation Preparation.............................................................................................................................55
7.3 Installation.................................................................................................................................................56
7.4 Usage......................................................................................................................................................... 61
7.5 Label’s Width............................................................................................................................................. 77
Chapter 8 BarTender Ultralite Instructions............................................................................................................. 78
8.1 Introduction...............................................................................................................................................78
8.2 Installation Preparation.............................................................................................................................78
8.3 Installation.................................................................................................................................................79
8.4 Usage......................................................................................................................................................... 83
Appendix..................................................................................................................................................................98

iT4 Series User Manual
Rev.1.0
Statement
This manual content may be altered without permission, and our company reserves the rights to make changes
without notice in technology, spare parts, hardware and software of the products. If more information is
needed about the products, please contact our company. Without any written permission from our company,
any section of this manual is prohibited to be copied or transferred in any form.
Copyright
This manual is printed in 2017, the copyright belongs to Xiamen Hanin Electronic Technology Co. Ltd.
Printed in China
1.0 Version
Warnings
This must be complied with in order to avoid any damage to the human body and the equipment.
This is showing the important information and tips for the printer operation.
Note: Due to continuous update of our product, the description of printer specification, accessories,
design in this manual may be slightly different. Please keep in kind prevail.

iT4 Series User Manual
Rev.1.0
1
Manual Information
This user manual contains basic information for product usage as well as for emergency measures that may be
required.
The installation and usage of printer driver, utility tool and iDPRT BarTender Ultralite are also included in the
manual.

iT4 Series User Manual
Rev.1.0
2
Important Safety Instructions
Before using the appliance, please carefully read the following safety regulations in order to prevent any hazard
or material damage.
1. Safety warning
Warnings: The print head will become very hot during printing; avoid contact with the print head after
printing has finished.
Warnings: Do not touch the printer head and connector in case static damage the printer head.
2. Instructions
Warnings: Violating following instructions can cause serious injury or death.
1) Do not plug several products in one multiperture outlet.
• This can provoke over-heating and a fire.
• If the plug is wet or dirty, dry or wipe it before usage.
• If the plug does not fit perfectly with the outlet, do not plug in.
• Be sure to use only standardized multiperture outlet.
2) You must use the supplied adapter.
• It is dangerous to use other adapters.
3) Do not pull the cable to unplug.
• This can damage the cable, which is the origin of a fire or a breakdown of the printer.
4) Do not plug in or unplug with your wet hands .
• You can be electrocuted.
5) Do not bend the cable by force or leave it under any heavy object.
• A damaged cable can cause a fire.

iT4 Series User Manual
Rev.1.0
3
Note: Violating following instructions may cause slight damage of the appliance.
1) If you observe a strange smoke, odour or noise from the printer, unplug it before taking following measures.
• Switch off the printer and unplug the set from the mains.
• After the disappearance of the smoke, call your dealer to repair it.
2) Install the printer on the stable surface.
• If the printer falls down, it can be broken and you can hurt yourself.
3) Use the approved accessories only and do not try to disassemble, repair or remodel it by yourself.
• Call your dealer when you need these services.
• Do not touch the blade of auto cutter.
4) Do not let water or other foreign objects drop into the printer.
• If this happened, switch off and unplug the printer before calling your dealer.
5) Do not use the printer when it is out of order. This can cause a fire or an electrocution.
• Switch off and unplug the printer before calling your dealer.
6) Other considerations:
• Place the printer on a solid and even base so that it cannot fall.
• Leave enough space around printer for operation and maintenance.
• Keep all liquids away from the printer.
• Do not expose the printer to high temperatures, direct sunlight or dust.
• Ensure the printer is connected to a socket with the correct mains voltage.
• Switch off the printer POWER supply when it’s not in use for a long time.
• To ensure the printing quality and reliability, suggest use the same quality or recommend paper supplier.
• Pls. switch off the POWER supply when connect/disconnect all the ports or it will cause damage to the
printer control circuit.
• Never carry out maintenance or repair work yourself. Always contact a qualified service Technician.
• Keep this User Manual in a place which is easily accessible at all times.

iT4 Series User Manual
Rev.1.0
4
3. Other Precautions
The copyright for this user manual and various other manuals is property of our company. Any copying or
conversion into electronic form and saving of this material without the express written permission is strictly
prohibited. Use of the information contained in this manual is not subject to any patent liability. This manual
has been prepared with utmost care and attention to detail but may contain certain errors and/or omissions.
Our company is not legally liable for any damages resulting from the use of the information in this manual. Our
company and its affiliates are not legally liable (United States excluded) for any damages, loss, costs, and/or
expenses that result from the breakdown, malfunction, and/or misuse of the product due to violation or
neglect of the operation and maintenance information and instructions provided by our company, as well as
from the unauthorized alteration, repair, and/or modification of the product by the user and/or third party. We
are not legally liable for any damages and/or issues resulting from the use of options and/or parts that are not
authentic or authorized products.
4. WEEE (Waste Electrical and Electric Equipment)
This mark shown on the product or its literature indicates that the corresponding item should not
be discarded at the end of its working life with other household waste. To prevent possible harm
to the environment or human health from uncontrolled waste disposal, please separate marked
items from other types of waste and recycle them responsibly to promote the sustained reuse of
material resources. Household users should contact either the retailer where they purchased this product, or
their local government office for details of where and how they can conduct environmentally safe recycling of
such items. Commercial users should contact their suppliers and check the terms and conditions of purchase
contracts. This product should not be combined with other commercial waste for disposal.
Caution: This is a Class A product. In a domestic environment this product may cause radio
interference in which the user may be required to take adequate measures.

iT4 Series User Manual
Rev.1.0
5
Chapter 1 Introduction
1.1 Packing List
Note:
1. Unpack the printer and keep the packing material in case you need to ship the printer in the future.
2. Any damages exist, please contact the local dealer.
Printer(eg: iT4E) AC Adapter Power Cord
USB Cable Label Roll Ribbon Spindles
Ribbon Empty Ribbon Core CD
Quick Start Guide
Note: The packing materials are actually dependent on the order.

iT4 Series User Manual
Rev.1.0
6
1.2 Appearance and Components
￭Front View
￭Rear View
Note: The views above are for your reference. Ports vary by your choice.

iT4 Series User Manual
Rev.1.0
7
￭Inside View

iT4 Series User Manual
Rev.1.0
8
1.3 Dimension
Take printer iT4E as example.

iT4 Series User Manual
Rev.1.0
9
Chapter 2 Specifications
(3/1)
Item
Parameter
Type
iT4S
iT4E
iT4X
iT4P
Printing
Printing Method
Thermal transfer/Direct thermal
Resolution
STD 203dpi,OPT 300dpi
Max.Printing
Speed
5 ips (203dpi)
8 ips (203dpi)
4 ips (300dpi)
6 ips (300dpi)
Max.Printing
Width
108 mm(203dpi),106 mm(300dpi)
Max.Pringting
Length
2,286 mm(203dpi),1,524 mm(300dpi)
Memory
RAM
32MB
64MB
32MB
64MB
Flash
64MB
128MB
64MB
128MB
Programming Language
ZPL-II,EPL-II,DPL
Detection
Sensor
Print Frame Open Detect, Ribbon End Detect, Paper Out Detect,
TPH Over Heating Detect, 2 Fixed See-through sensor, Full Range
Reflective Sensor
Media
Types
Continuous Paper, Gap, Black Mark, Punched Hole Label
Width
1''(25.4)-4.65''(118 mm), include the liner
Thickness
0.002''(60um)-0.01''(250um)
Label Roll
Diameter
5''(127 mm) Max
Core Diameter
0.5''(12.7 mm), 1''(25.4 mm). 1.5''(38 mm)
Ribbon
Type
Wax,Wax/Resin,Resin
Width
1.18''(30 mm)-4.33''(110 mm)
Length
984'(300 m)
Core Diameter
1''(25.4 mm)
Software
Label Design
Software
iDPRT Bartender Ultralite
Driver
Windows 7,8,10,server 2008,2012
CUPS for Linux and MAC OS
Resident
Fonts
Bitmap fonts
6, 8, 12, 16, 32, OCR A & B. 90°, 180°, 270° rotatable and 10
times expandable in horizontal and vertical directions
TTF fonts
Monotype CG Triumvirate™. 0°, 90°, 180°, 270° rotatable

iT4 Series User Manual
Rev.1.0
10
(3/2)
Download
Fonts
Bitmap fonts
90°, 180°, 270° rotatable and 10 times expandable in horizontal
and vertical directions
Asian fonts
16x16, 24x24. Traditional Chinese, Simplified Chinese, Japanese,
Korean, 90∘,180∘,270∘, rotatable and 8 times expandable in
horizontal and vertical directions
TTF fonts
90°, 180°, 270° rotatable
Barcodes
1D
Code 39, Code 93, EAN 8/13 (add on 2 & 5), UPC A/E (add on 2 & 5), I 2
of 5, Codabar, Code 128 (subset A,B, C), EAN 128, MSI, Plessey,
Telepen, GS1 DataBar, Standard 2 of 5, Industrial 2 of 5, Code 11, Code 49
2D
PDF417, Data matrix code, QR code, Micro PDF417, Aztec code
Code Pages
850, 852, 437, 860, 863, 865, 857, 861, 862, 855, 866, 737, 851,
869, WINDOWS 1250, 1251, 1252, 1253, 1254, 1255, 1257,
UTF-8, UTF-16BE, UTF-16LE,
DBCS 932 (JIS), 936(GBK), 949 (Koran), 950(BIG5)
Graphics
Resident graphic file types are BMP and PCX, other graphic formats
are converted by the software download
Interfaces
Standard
USB
USB,USB
HOST,RS232,
Ethernet
USB,RS232,
Ethernet
USB,USB
HOST,RS232,
Ethernet
Optional
Wi-Fi,Bluetooth
Parallel,
Wi-Fi,
Bluetooth
Wi-Fi,
Bluetooth
Parallel,
Wi-Fi,
Bluetooth
Control
Panel
Power switch button, FEED button, 2 indicating LED
Item
Parameter

iT4 Series User Manual
Rev.1.0
11
(3/3)
Item
Parameter
LCD Display
Not Support
3.5" TFT LCD
with
Navigation
Button
Not Support
3.5" TFT
Color Touch
Panel LCD
RTC Function
Not Support
Standard
Not Support
Standard
Power Supply
External AC/DC switching power adapter,
AC 100V-240V/DC 24V/2A/48W,Peak 5A
External AC/DC switching
power adapter,
AC 100V-240V/DC
24V/2.5A/60W,Peak 9A
Environment
Operation
5 to 50℃@ humidity 25% to 85% non-condensing
Storage
-40 to 60℃@ humidity 10% to 90% non-condensing
Physical
Characteristic
Dimension
(L*H*W)
308*250*180 mm
Weight
About 2.9 kg
Options &
Accessory
Peeler Module, Cutter Module, External Label Roll Holder
Agency
Approval
CE EMC (EN 55022 Class B), FCC EMC (Class A), CCC, RoHS

iT4 Series User Manual
Rev.1.0
12
Chapter 3 Installation & Usage
3.1 Media Loading
3.1.1 Loading the Roll
1.Press to open the printer cover and mechanism.
2.Pull the roll holders open and place the roll between them.

iT4 Series User Manual
Rev.1.0
13
3.Press down the locking tab.
4.Pass the labels through label guides and adjust label guides to label’s width.
Note: If your printer is under Thermal Line Printing Method, press down the printer cover until it snaps
closed. Otherwise, continue the procedure in chapter 3.1.2.

iT4 Series User Manual
Rev.1.0
14
3.1.2 Loading the Ribbon
1.Install the ribbon module.
2.Insert the left part of supply spindle and then the right part.

iT4 Series User Manual
Rev.1.0
15
3.Press down the printer mechanism.
4.Insert the left part of rewind spindle and then the right part.

iT4 Series User Manual
Rev.1.0
16
5.Wind the core 2~3 circles until the ribbon is pulled tightly.
6.Fix the mechanism and close the cover.

iT4 Series User Manual
Rev.1.0
17
3.2 Power Connection
1.Connect the AC adapter to power receptacle.
2.Connect the power cord to AC adapter.
3.Connect the other end of power cord to the outlet.
Caution：
Use the original power adapter only. Avoid the damage caused by charging improperly.
Please unplug the printer power cord if it is not in use for a long time.