Xilinx DK-V7-VC709-G User manual

VC709 Evaluation
Board for the
Virtex-7 FPGA
User Guide
UG887 (v1.4) December 4, 2014

VC709 Evaluation Board www.xilinx.com UG887 (v1.4) December 4, 2014
The information disclosed to you hereunder (the “Materials”) is provided solely for the selection and use of Xilinx products. To the maximum
extent permitted by applicable law: (1) Materials are made available "AS IS" and with all faults, Xilinx hereby DISCLAIMS ALL
WARRANTIES AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF
MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and (2) Xilinx shall not be liable (whether
in contract or tort, including negligence, or under any other theory of liability) for any loss or damage of any kind or nature related to, arising
under, or in connection with, the Materials (including your use of the Materials), including for any direct, indirect, special, incidental, or
consequential loss or damage (including loss of data, profits, goodwill, or any type of loss or damage suffered as a result of any action
brought by a third party) even if such damage or loss was reasonably foreseeable or Xilinx had been advised of the possibility of the same.
Xilinx assumes no obligation to correct any errors contained in the Materials or to notify you of updates to the Materials or to product
specifications. You may not reproduce, modify, distribute, or publicly display the Materials without prior written consent. Certain products are
subject to the terms and conditions of Xilinx’s limited warranty, please refer to Xilinx’s Terms of Sale which can be viewed at
http://www.xilinx.com/legal.htm#tos; IP cores may be subject to warranty and support terms contained in a license issued to you by Xilinx.
Xilinx products are not designed or intended to be fail-safe or for use in any application requiring fail-safe performance; you assume sole risk
and liability for use of Xilinx products in such critical applications, please refer to Xilinx’s Terms of Sale which can be viewed at
http://www.xilinx.com/legal.htm#tos.
© Copyright 2013–2014 Xilinx, Inc. Xilinx, the Xilinx logo, Artix, ISE, Kintex, Spartan, Vivado, Virtex, Zynq, and other designated brands
included herein are trademarks of Xilinx in the United States and other countries. PCI, PCI Express, PCIe, and PCI-X are trademarks of
PCI-SIG. All other trademarks are the property of their respective owners.
Revision History
The following table shows the revision history for this document.
, Date Version Revision
02/04/2013 1.0 Initial Xilinx release.
06/04/2013 1.1 Changed XC7VX690T-2FFG1761CES to XC7VX690T-2FFG1761C throughout the
document. Changed SiT9122 to SiT9102. The data rate in Linear BPI Flash Memory,
page 22 changed from 40 MHz to 80 MHz. Added items 28 and 29 to the board
photograph in Figure 1-2. FPGA EMCC clock information was added to Table 1-7,
Table 1-8, Figure 1-13, and FPGA EMCC Clock, page 34. In Table 1-18, the DS1
description for RED changed. Replaced Figure 1-22 Configuration Mode and Upper Linear
Flash Address Switch. Enhanced section Switches, page 52. Updated part ordering
information in FMC_VADJ Voltage, page 62. Updated Figure 1-29 VC709 Board
Configuration Circuit. Replaced Appendix C, Master UCF Listing with Master Constraints
File Listing. Updated References, page 97.
01/07/2014 1.2 Revised the content of Table 1-16, page 46. Revised Table 1-20 to correct connection of
FMC1_HPC_LA29_N, page 58 to FPGA pin T30 (Was W30). Revised all links and
references in Appendix F, Additional Resources and revised links to web pages and
documents throughout document to conform to latest linking style convention. Added
caution note about power connections to J18 on the VC709 board on page 98. Revised
link under Declaration of Conformity in Appendix G to point directly at the Certificate
PDF instead of XTP251, the list of Certificates of Conformity.
03/11/2014 1.2.1 Tech Pubs edit. Technical content not affected.
04/30/2014 1.3 Revised the data rate for the small outline dual-inline memory modules (SODIMMs)
in VC709 Board Features and Dual DDR3 Memory SODIMMs.

UG887 (v1.4) December 4, 2014 www.xilinx.com VC709 Evaluation Board
12/04/2014 1.4 Added MT28GU01GAAA1EGC-0SIT part number for the BPI parallel NOR flash
memory component to Table 1-1, Linear BPI Flash Memory, and References. Added a
note to Table 1-1. Updated User SMA Clock (USER_SMA_CLOCK_P and
USER_SMA_CLOCK_N), Jitter-Attenuated Clock, I2C Bus, and Power Management.
Updated part number in Figure 1-4. Updated Figure 1-11 to correct net names. Added
I/O standard information to Table 1-4, Table 1-5, Table 1-6, Table 1-8, Table 1-14,
Table 1-19, and Table 1-20. Added PCIe® edge connector information after Table 1-12.
Updated description for XADC_GPIO_3, 2, 1, 0 in Table 1-25. Updated Table A-3 and
added Figure A-3. Updated VC709 Board XDC Listing. Updated References.
Date Version Revision

VC709 Evaluation Board www.xilinx.com UG887 (v1.4) December 4, 2014

VC709 Evaluation Board www.xilinx.com 5
UG887 (v1.4) December 4, 2014
Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Chapter 1: VC709 Evaluation Board Features
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
VC709 Board Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Feature Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Virtex-7 XC7VX690T-2FFG1761C FPGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Dual DDR3 Memory SODIMMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Linear BPI Flash Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
USB JTAG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Clock Generation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Memory Clock (SYSCLK_233_P and SYSCLK_233_N) . . . . . . . . . . . . . . . . . . . . . . . . . 33
FPGA EMCC Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
GTH Transceivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
PCI Express Endpoint Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
SFP/SFP+ Module Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
USB-to-UART Bridge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
I2C Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
User I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
VITA 57.1 FMC1 HPC Connector (Partially Populated) . . . . . . . . . . . . . . . . . . . . . . . . 54
Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
FMC_VADJ Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
XADC Analog-to-Digital Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Configuration Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Appendix A: Default Switch and Jumper Settings
GPIO DIP Switch SW2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Configuration DIP Switch SW11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Default Jumper Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Appendix B: VITA 57.1 FMC Connector Pinouts
Appendix C: Master Constraints File Listing
VC709 Board XDC Listing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Appendix D: Board Setup
Installing the VC709 Board in a PC Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Table of Contents
Send Feedback

6www.xilinx.com VC709 Evaluation Board
UG887 (v1.4) December 4, 2014
Appendix E: Board Specifications
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Appendix F: Additional Resources
Xilinx Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Solution Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Appendix G: Regulatory and Compliance Information
Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Directives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Electromagnetic Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Markings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Send Feedback

VC709 Evaluation Board www.xilinx.com 7
UG887 (v1.4) December 4, 2014
Chapter 1
VC709 Evaluation Board Features
Overview
The VC709 evaluation board for the Virtex®-7 FPGA provides a hardware environment for
developing and evaluating designs targeting the Virtex-7 XC7VX690T-2FFG1761C FPGA.
The VC709 board provides features common to many embedded processing systems,
including dual DDR3 small outline dual-inline memory module (SODIMM) memories, an
8-lane PCI Express® interface, general purpose I/O, and a UART interface. Other features
can be added by using mezzanine cards attached to the VITA-57 FPGA mezzanine
connector (FMC) provided on the board. A high pin count (HPC) FMC is provided. See
VC709 Board Features for a complete list of features. The details for each feature are
described in Feature Descriptions, page 10.
Additional Information
See Appendix F, Additional Resources for references to documents, files, and resources
relevant to the VC709 board.
VC709 Board Features
• Virtex-7 XC7VX690T-2FFG1761C FPGA
• 2X 4 GB 1600MTs DDR3 memory SODIMMs
• 128 MB linear byte-wide peripheral interface (BPI) flash memory
• USB JTAG through Digilent module
• Clock generation
• Fixed 200 MHz LVDS oscillator
• Fixed 233.33 MHz LVDS oscillator
•I
2C programmable LVDS oscillator
• SMA connectors
• SMA connectors for GTH transceiver clocking
•GTHtransceivers
• FMC HPC connector (eight transceivers)
• SMA connectors (one pair for MGT_REFCLK)
• PCI Express (eight lanes)
• 4 X Small form-factor pluggable plus (SFP+) connectors
• PCI Express endpoint connectivity
• Gen1 8-lane (x8)
Send Feedback

8www.xilinx.com VC709 Evaluation Board
UG887 (v1.4) December 4, 2014
Chapter 1: VC709 Evaluation Board Features
• Gen2 8-lane (x8)
• Gen3 8-lane (x8)
• 4 X SFP+ connectors
• USB-to-UART bridge
•I
2C bus
•I
2C MUX
•I
2C EEPROM (1 KB)
•USERI
2C programmable LVDS oscillator
• 2 X DDR3 SODIMM socket
• FMC HPC connector
• 4 X SFP+ connector
•I
2C programmable jitter-attenuating precision clock multiplier
• Status LEDs
• 12VDC power on
• TI controlled power good
• Linear power good
•FPGAINIT
•FPGADONE
•UserI/O
• User LEDs (eight GPIO)
• User pushbuttons (five directional)
• CPU reset pushbutton
•UserDIPswitch(8-poleGPIO)
•Switches
• Power on/off slide switch
•FPGA_PROG_Bpushbutton
• Configuration mode DIP switch
• VITA 57.1 FMC HPC connector
• Power management
• PMBus voltage and current monitoring through TI power controllers
•XADCheader
• Configuration options
• Linear BPI flash memory
• USB JTAG (Digilent) configuration port
Send Feedback

VC709 Evaluation Board www.xilinx.com 9
UG887 (v1.4) December 4, 2014
Overview
The VC709 board block diagram is shown in Figure 1-1.
Caution! The VC709 board can be damaged by electrostatic discharge (ESD). Follow
standard ESD prevention measures when handling the board.
X-Ref Target - Figure 1-1
Figure 1-1: VC709 Board Block Diagram
HPC FMC Connector
4 GB DDR3Memory
(SODIMM)
1 KB EEPROM
(I2C)
I2C Bus Switch
DIP Switch SW11
Config and
Flash Addr
USB-to-UART
Bridge
JTAG Interface
Micro-B USB
Connector 4X SFP+ Cage
UG887_c1_01_012113
8-lane PCI Express
Edge Connector
SI5324C
Clock Recovery
128MB Linear BPI
Flash Memory
Virtex-7 FPGA
XC7VX690T-2FFG1761C
User Switches,
Buttons, and LEDs
XADC Header
Differential Clock
GTH SMA Clock
4 GB DDR3Memory
(SODIMM)
Send Feedback

10 www.xilinx.com VC709 Evaluation Board
UG887 (v1.4) December 4, 2014
Chapter 1: VC709 Evaluation Board Features
Feature Descriptions
Figure 1-2 shows the VC709 board. Each numbered feature that is referenced in Figure 1-2
is described in Table 1-1 and following sections.
Note: The image in Figure 1-2 is for reference only and might not reflect the current revision of the
board.
X-Ref Target - Figure 1-2
Figure 1-2: VC709 Board Component Locations
00 Round callout referencesacomponent
on the front side of the board. 00 Square callout referencesacomponent on the back side of the board.
4
2
12
11
1
UG887_c1_02_051013
2
19
18
26
17
10
20 87
2322 316 25
21
24
13
15
5
6
27
9 14
26
29
28
Table 1-1: VC709 Board Component Descriptions
Callout Reference
Designator Component Description Notes
Schematic
0381499
Page
Number
1U1 Virtex-7 FPGAXC7VX690T-2FFG1761C with
cooling fan XC7VX690T-2FFG1761C
2J1, J3 Two DDR3 SODIMM memories (4 GB each) Micron MT8KTF51264HZ-1G9E1 10, 14
3U3 BPI parallel NOR flash memory (1 Gb) Micron PC28F00AG18FE/
MT28GU01GAAA1EGC-0SIT 24
4U26 USB JTAG interface (micro-B USB connector) Digilent USB JTAG module 5
5U51 System clock, 200 MHz, LVDS (back side of
board)
SiTime
SIT9102-243N25E200.0000 3
6
U34
I2C programmable user clock LVDS,
156.250 MHz default frequency (back side of
board)
Silicon Labs
SI570BAB0000544DG (I²C 0x5D) 3
Send Feedback

VC709 Evaluation Board www.xilinx.com 11
UG887 (v1.4) December 4, 2014
Feature Descriptions
7J31, J32 User SMA clock Rosenberger 32K10K-400L5 3
8J25, J26 GTH transceiver SMA reference clock Rosenberger 32K10K-400L5 30
9U24 Jitter-attenuated clock (back side of board) Silicon Labs SI5324C-C-GM 4
10 U1 GTH transceiver Quad 111–Quad 119 Embedded within FPGA U1 30, 36–38
11 P1 PCI Express connector 8-lane card edge connector 35
12 P2–P5 4 X SFP/SFP+ module connector (I²C 0x50) Molex 74441-0010 31–35
13 U44, J17 USB-to-UART bridge with mini-B USB
connector Silicon Labs CP2103GM 6
14 U52 I2C bus switch (I²C 0x74) (back side of board) TI PCA9548ARGER 29
15 U14 I2C bus switch (I²C 0x75) (back side of board) TI PCA9546ARGVR 29
16 DS2–DS9 User LEDs, Green Lumex SML-LX0603GW 25
17 SW3–SW7 User pushbuttons, active-High E-Switch TL3301EP100QG 25
18 SW2 User DIP switch, active-High 8-pole C and K SDA08H1SBD 25
19 SW8, SW9 CPU RESET, FPGA PROG pushbuttons E-Switch TL3301EP100QG 25, 7
20 SW11 Configuration mode/upper linear flash
address DIP switch 5-pole C and K SDA05H1IBD 7
21 SW12 Power on/off slide switch C and K 1201M2S3AQE2 46
22 J35 FMC HPC connector Samtec ASP_134486_01 18–21
23 J19 Xilinx XADC header 2 x 10 0.1-inch male header 27
24 DS1 INIT LED, dual color Red/Green Avago HSMF-C155 38
25 DS10,DS14,
DS16–DS18 Power ON and Power GOOD LEDs Lumex SML-LX0603GW 38
26 Various Power management system (front and back
side of board)
TI UCD9248PFC in conjunction
with various regulators 45–56
27 U13 Memory clock, 233.33 MHz, LVDS (back side
of board)
SiTime
SIT9122AC-2D3-25E233.333333 3
28 J35 2 x 5 shrouded PMBus connector Assman HW10G-0202 46
29 J18 12V power input 2 x 3 connector Molex 39-30-1060 46
Notes:
1. Jumper header locations are identified in Appendix A, Default Switch and Jumper Settings.
Table 1-1: VC709 Board Component Descriptions (Cont’d)
Callout Reference
Designator Component Description Notes
Schematic
0381499
Page
Number
Send Feedback

12 www.xilinx.com VC709 Evaluation Board
UG887 (v1.4) December 4, 2014
Chapter 1: VC709 Evaluation Board Features
Virtex-7 XC7VX690T-2FFG1761C FPGA
[Figure 1-2, callout 1]
The VC709 board is populated with the Virtex-7 XC7VX690T-2FFG1761C FPGA.
For further information on Virtex-7 FPGAs, see 7 Series FPGAs Overview (DS180) [Ref 1].
FPGA Configuration
The VC709 board supports two of the five 7 series FPGA configuration modes:
• Master BPI using the onboard linear BPI flash memory
• JTAG using a type-A to micro-B USB cable for connecting the host PC to the VC709
board configuration port
Each configuration interface corresponds to one or more configuration modes and bus
widths as listed in Table 1-2. The mode switches M2, M1, and M0 are on SW11 positions 3,
4, and 5 respectively as shown in Figure 1-3.
Note: To determine the FPGA type resident on the VC709 board, see the Virtex-7 VC709
Evaluation Kit Master Answer Record (AR 51901).
The default mode setting is M[2:0] = 010, which selects Master BPI at board power-on. See
Configuration Options, page 66 for detailed information about the mode switch SW11.
For full details on configuring the FPGA, see 7 Series FPGAs Configuration User Guide
(UG470) [Ref 2].
X-Ref Target - Figure 1-3
Figure 1-3: SW11 Default Settings
Table 1-2: VC709 Board FPGA Configuration Modes
Configuration Mode SW13 DIP Switch
Settings (M[2:0]) Bus Width CCLK Direction
Master BPI 010 x8, x16 Output
JTAG 101 x1 Not applicable
UG887_c1_03_083112
1
OFF Position = 0
ON Position = 1
234 5
A25
A24 M2
M1 M0
Send Feedback

VC709 Evaluation Board www.xilinx.com 13
UG887 (v1.4) December 4, 2014
Feature Descriptions
I/O Voltage Rails
There are 17 I/O banks available on the Virtex-7 device. Fourteen I/O banks are available
on the VC709 board, and banks 12, 16, and 18 are not used. The voltages applied to the
FPGA I/O banks used by the VC709 board are listed in Table 1-3.
Table 1-3: I/O Voltage Rails
FPGA (U1) Bank Power Supply Rail Net Name Voltage
Bank 0 VCC1V8_FPGA 1.8V
Bank 12 NOT USED 1.8V
Bank 13 VCC1V8_FPGA 1.8V
Bank 14 VCC1V8_FPGA 1.8V
Bank 15 VCC1V8_FPGA 1.8V
Bank 16 NOT USED 1.8V
Bank 17 VCC1V8_FPGA 1.8V
Bank 18 NOT USED 1.8V
Bank 19 VCC1V8_FPGA 1.8V
Bank 31 VCC1V5_FPGA 1.5V
Bank 32 VCC1V5_FPGA 1.5V
Bank 33 VCC1V5_FPGA 1.5V
Bank 34 VCC1V8_FPGA 1.8V
Bank 35 VADJ_FPGA 1.8V
Bank 36 FMC1_VIO_B_M2C Variable
Bank 37 VCC1V5_FPGA 1.5V
Bank 38 VCC1V5_FPGA 1.5V
Bank 39 VCC1V5_FPGA 1.5V
Send Feedback

14 www.xilinx.com VC709 Evaluation Board
UG887 (v1.4) December 4, 2014
Chapter 1: VC709 Evaluation Board Features
Dual DDR3 Memory SODIMMs
[Figure 1-2, callout 2]
The memory modules at J1 and J3 are 4 GB DDR3 small outline dual-inline memory
modules (SODIMMs), providing volatile synchronous dynamic random access memory
(SDRAM) for storing user code and data.
• Part number: MT8KTF51264HZ-1G9E1 (Micron Technology)
• Supply voltage: 1.5V
• Datapath width: 64 bits
• Data rate: Up to 1600 MT/s
Each DDR3 interface is implemented across three I/O banks: 37, 38, and 39 for J1 and 31, 32
and 33 for J3. Each bank is a 1.5V high-performance bank having a dedicated DCI VRP/N
resistor connection. An external 0.75V reference VTTREF is provided for data interface
banks 37, 39, 31, and 33. Any interface connected to these banks that requires a reference
voltage must use this FPGA voltage reference. The connections between the DDR3
memory SODIMM sockets and the FPGA are listed in Table 1-4 and Table 1-5.
Table 1-4: DDR3 SODIMM Socket J1 Connections to the FPGA
XCVX690T (U1) Pin Net Name I/O Standard DDR3 SODIMM Memory J1
Pin Number Pin Number
A20 DDR3_A_A0 SSTL15 98 A0
B19 DDR3_A_A1 SSTL15 97 A1
C20 DDR3_A_A2 SSTL15 96 A2
A19 DDR3_A_A3 SSTL15 95 A3
A17 DDR3_A_A4 SSTL15 92 A4
A16 DDR3_A_A5 SSTL15 91 A5
D20 DDR3_A_A6 SSTL15 90 A6
C18 DDR3_A_A7 SSTL15 86 A7
D17 DDR3_A_A8 SSTL15 89 A8
C19 DDR3_A_A9 SSTL15 85 A9
B21 DDR3_A_A10 SSTL15 107 A10/AP
B17 DDR3_A_A11 SSTL15 84 A11
A15 DDR3_A_A12 SSTL15 83 A12_BC_N
A21 DDR3_A_A13 SSTL15 119 A13
F17 DDR3_A_A14 SSTL15 80 A14
E17 DDR3_A_A15 SSTL15 78 A15
D21 DDR3_A_BA0 SSTL15 109 BA0
C21 DDR3_A_BA1 SSTL15 108 BA1
D18 DDR3_A_BA2 SSTL15 79 BA2
N14 DDR3_A_D0 SSTL15 5 DQ0
Send Feedback

VC709 Evaluation Board www.xilinx.com 15
UG887 (v1.4) December 4, 2014
Feature Descriptions
N13 DDR3_A_D1 SSTL15 7 DQ1
L14 DDR3_A_D2 SSTL15 15 DQ2
M14 DDR3_A_D3 SSTL15 17 DQ3
M12 DDR3_A_D4 SSTL15 4 DQ4
N15 DDR3_A_D5 SSTL15 6 DQ5
M11 DDR3_A_D6 SSTL15 16 DQ6
L12 DDR3_A_D7 SSTL15 18 DQ7
K14 DDR3_A_D8 SSTL15 21 DQ8
K13 DDR3_A_D9 SSTL15 23 DQ9
H13 DDR3_A_D10 SSTL15 33 DQ10
J13 DDR3_A_D11 SSTL15 35 DQ11
L16 DDR3_A_D12 SSTL15 22 DQ12
L15 DDR3_A_D13 SSTL15 24 DQ13
H14 DDR3_A_D14 SSTL15 34 DQ14
J15 DDR3_A_D15 SSTL15 36 DQ15
E15 DDR3_A_D16 SSTL15 39 DQ16
E13 DDR3_A_D17 SSTL15 41 DQ17
F15 DDR3_A_D18 SSTL15 51 DQ18
E14 DDR3_A_D19 SSTL15 53 DQ19
G13 DDR3_A_D20 SSTL15 40 DQ20
G12 DDR3_A_D21 SSTL15 42 DQ21
F14 DDR3_A_D22 SSTL15 50 DQ22
G14 DDR3_A_D23 SSTL15 52 DQ23
B14 DDR3_A_D24 SSTL15 57 DQ24
C13 DDR3_A_D25 SSTL15 59 DQ25
B16 DDR3_A_D26 SSTL15 67 DQ26
D15 DDR3_A_D27 SSTL15 69 DQ27
D13 DDR3_A_D28 SSTL15 56 DQ28
E12 DDR3_A_D29 SSTL15 58 DQ29
C16 DDR3_A_D30 SSTL15 68 DQ30
D16 DDR3_A_D31 SSTL15 70 DQ31
A24 DDR3_A_D32 SSTL15 129 DQ32
Table 1-4: DDR3 SODIMM Socket J1 Connections to the FPGA (Cont’d)
XCVX690T (U1) Pin Net Name I/O Standard DDR3 SODIMM Memory J1
Pin Number Pin Number
Send Feedback

16 www.xilinx.com VC709 Evaluation Board
UG887 (v1.4) December 4, 2014
Chapter 1: VC709 Evaluation Board Features
B23 DDR3_A_D33 SSTL15 131 DQ33
B27 DDR3_A_D34 SSTL15 141 DQ34
B26 DDR3_A_D35 SSTL15 143 DQ35
A22 DDR3_A_D36 SSTL15 130 DQ36
B22 DDR3_A_D37 SSTL15 132 DQ37
A25 DDR3_A_D38 SSTL15 140 DQ38
C24 DDR3_A_D39 SSTL15 142 DQ39
E24 DDR3_A_D40 SSTL15 147 DQ40
D23 DDR3_A_D41 SSTL15 149 DQ41
D26 DDR3_A_D42 SSTL15 157 DQ42
C25 DDR3_A_D43 SSTL15 159 DQ43
E23 DDR3_A_D44 SSTL15 146 DQ44
D22 DDR3_A_D45 SSTL15 148 DQ45
F22 DDR3_A_D46 SSTL15 158 DQ46
E22 DDR3_A_D47 SSTL15 160 DQ47
A30 DDR3_A_D48 SSTL15 163 DQ48
D27 DDR3_A_D49 SSTL15 165 DQ49
A29 DDR3_A_D50 SSTL15 175 DQ50
C28 DDR3_A_D51 SSTL15 177 DQ51
D28 DDR3_A_D52 SSTL15 164 DQ52
B31 DDR3_A_D53 SSTL15 166 DQ53
A31 DDR3_A_D54 SSTL15 174 DQ54
A32 DDR3_A_D55 SSTL15 176 DQ55
E30 DDR3_A_D56 SSTL15 181 DQ56
F29 DDR3_A_D57 SSTL15 183 DQ57
F30 DDR3_A_D58 SSTL15 191 DQ58
F27 DDR3_A_D59 SSTL15 193 DQ59
C30 DDR3_A_D60 SSTL15 180 DQ60
E29 DDR3_A_D61 SSTL15 182 DQ61
F26 DDR3_A_D62 SSTL15 192 DQ62
D30 DDR3_A_D63 SSTL15 194 DQ63
M13 DDR3_A_DM0 SSTL15 11 DM0
Table 1-4: DDR3 SODIMM Socket J1 Connections to the FPGA (Cont’d)
XCVX690T (U1) Pin Net Name I/O Standard DDR3 SODIMM Memory J1
Pin Number Pin Number
Send Feedback

VC709 Evaluation Board www.xilinx.com 17
UG887 (v1.4) December 4, 2014
Feature Descriptions
K15 DDR3_A_DM1 SSTL15 28 DM1
F12 DDR3_A_DM2 SSTL15 46 DM2
A14 DDR3_A_DM3 SSTL15 63 DM3
C23 DDR3_A_DM4 SSTL15 136 DM4
D25 DDR3_A_DM5 SSTL15 153 DM5
C31 DDR3_A_DM6 SSTL15 170 DM6
F31 DDR3_A_DM7 SSTL15 187 DM7
M16 DDR3_A_DQS0_N DIFF_SSTL15 10 DQS0_N
N16 DDR3_A_DQS0_P DIFF_SSTL15 12 DQS0_P
J12 DDR3_A_DQS1_N DIFF_SSTL15 27 DQS1_N
K12 DDR3_A_DQS1_P DIFF_SSTL15 29 DQS1_P
G16 DDR3_A_DQS2_N DIFF_SSTL15 45 DQS2_N
H16 DDR3_A_DQS2_P DIFF_SSTL15 47 DQS2_P
C14 DDR3_A_DQS3_N DIFF_SSTL15 62 DQS3_N
C15 DDR3_A_DQS3_P DIFF_SSTL15 64 DQS3_P
A27 DDR3_A_DQS4_N DIFF_SSTL15 135 DQS4_N
A26 DDR3_A_DQS4_P DIFF_SSTL15 137 DQS4_P
E25 DDR3_A_DQS5_N DIFF_SSTL15 152 DQS5_N
F25 DDR3_A_DQS5_P DIFF_SSTL15 154 DQS5_P
B29 DDR3_A_DQS6_N DIFF_SSTL15 169 DQS6_N
B28 DDR3_A_DQS6_P DIFF_SSTL15 171 DQS6_P
E28 DDR3_A_DQS7_N DIFF_SSTL15 186 DQS7_N
E27 DDR3_A_DQS7_P DIFF_SSTL15 188 DQS7_P
E18 DDR3_A_CLK0_N DIFF_SSTL15 103 CK0_N
E19 DDR3_A_CLK0_P DIFF_SSTL15 101 CK0_P
F19 DDR3_A_CLK1_N DIFF_SSTL15 104 CK1_N
G19 DDR3_A_CLK1_P DIFF_SSTL15 102 CK1_P
K19 DDR3_A_CKE0 SSTL15 73 CKE0
J18 DDR3_A_CKE1 SSTL15 74 CKE1
E20 DDR3_A_RAS_B SSTL15 110 RAS_B
F20 DDR3_A_WE_B SSTL15 113 WE_B
K17 DDR3_A_CAS_B SSTL15 115 CAS_B
Table 1-4: DDR3 SODIMM Socket J1 Connections to the FPGA (Cont’d)
XCVX690T (U1) Pin Net Name I/O Standard DDR3 SODIMM Memory J1
Pin Number Pin Number
Send Feedback

18 www.xilinx.com VC709 Evaluation Board
UG887 (v1.4) December 4, 2014
Chapter 1: VC709 Evaluation Board Features
H20 DDR3_A_ODT0 SSTL15 116 ODT0
H18 DDR3_A_ODT1 SSTL15 120 ODT1
J17 DDR3_A_S0_B SSTL15 114 S0_B
J20 DDR3_A_S1_B SSTL15 121 S1_B
P18 DDR3_A_RESET_B SSTL15 30 RESET_B
G17 DDR3_A_TEMP_EVENT_B SSTL15 198 EVENT_B
Table 1-4: DDR3 SODIMM Socket J1 Connections to the FPGA (Cont’d)
XCVX690T (U1) Pin Net Name I/O Standard DDR3 SODIMM Memory J1
Pin Number Pin Number
Table 1-5: DDR3 SODIMM Socket J3 Connections to the FPGA
XCVX690T (U1) Pin Net Name I/O Standard DDR3 SODIMM Memory J3
Pin Number Pin Name
AN19 DDR3_B_A0 SSTL15 98 A0
AR19 DDR3_B_A1 SSTL15 97 A1
AP20 DDR3_B_A2 SSTL15 96 A2
AP17 DDR3_B_A3 SSTL15 95 A3
AP18 DDR3_B_A4 SSTL15 92 A4
AJ18 DDR3_B_A5 SSTL15 91 A5
AN16 DDR3_B_A6 SSTL15 90 A6
AM16 DDR3_B_A7 SSTL15 86 A7
AK18 DDR3_B_A8 SSTL15 89 A8
AK19 DDR3_B_A9 SSTL15 85 A9
AM17 DDR3_B_A10 SSTL15 107 A10/AP
AM18 DDR3_B_A11 SSTL15 84 A11
AL17 DDR3_B_A12 SSTL15 83 A12_BC_N
AK17 DDR3_B_A13 SSTL15 119 A13
AM19 DDR3_B_A14 SSTL15 80 A14
AL19 DDR3_B_A15 SSTL15 78 A15
AR17 DDR3_B_BA0 SSTL15 109 BA0
AR18 DDR3_B_BA1 SSTL15 108 BA1
AN18 DDR3_B_BA2 SSTL15 79 BA2
AN24 DDR3_B_D0 SSTL15 5 DQ0
AM24 DDR3_B_D1 SSTL15 7 DQ1
AR22 DDR3_B_D2 SSTL15 15 DQ2
Send Feedback

VC709 Evaluation Board www.xilinx.com 19
UG887 (v1.4) December 4, 2014
Feature Descriptions
AR23 DDR3_B_D3 SSTL15 17 DQ3
AN23 DDR3_B_D4 SSTL15 4 DQ4
AM23 DDR3_B_D5 SSTL15 6 DQ5
AN21 DDR3_B_D6 SSTL15 16 DQ6
AP21 DDR3_B_D7 SSTL15 18 DQ7
AK23 DDR3_B_D8 SSTL15 21 DQ8
AJ23 DDR3_B_D9 SSTL15 23 DQ9
AL21 DDR3_B_D10 SSTL15 33 DQ10
AM21 DDR3_B_D11 SSTL15 35 DQ11
AJ21 DDR3_B_D12 SSTL15 22 DQ12
AJ20 DDR3_B_D13 SSTL15 24 DQ13
AK20 DDR3_B_D14 SSTL15 34 DQ14
AL20 DDR3_B_D15 SSTL15 36 DQ15
AW22 DDR3_B_D16 SSTL15 39 DQ16
AW23 DDR3_B_D17 SSTL15 41 DQ17
AW21 DDR3_B_D18 SSTL15 51 DQ18
AV21 DDR3_B_D19 SSTL15 53 DQ19
AU23 DDR3_B_D20 SSTL15 40 DQ20
AV23 DDR3_B_D21 SSTL15 42 DQ21
AR24 DDR3_B_D22 SSTL15 50 DQ22
AT24 DDR3_B_D23 SSTL15 52 DQ23
BB24 DDR3_B_D24 SSTL15 57 DQ24
BA24 DDR3_B_D25 SSTL15 59 DQ25
AY23 DDR3_B_D26 SSTL15 67 DQ26
AY24 DDR3_B_D27 SSTL15 69 DQ27
AY25 DDR3_B_D28 SSTL15 56 DQ28
BA25 DDR3_B_D29 SSTL15 58 DQ29
BB21 DDR3_B_D30 SSTL15 68 DQ30
BA21 DDR3_B_D31 SSTL15 70 DQ31
AY14 DDR3_B_D32 SSTL15 129 DQ32
AW15 DDR3_B_D33 SSTL15 131 DQ33
BB14 DDR3_B_D34 SSTL15 141 DQ34
Table 1-5: DDR3 SODIMM Socket J3 Connections to the FPGA (Cont’d)
XCVX690T (U1) Pin Net Name I/O Standard DDR3 SODIMM Memory J3
Pin Number Pin Name
Send Feedback

20 www.xilinx.com VC709 Evaluation Board
UG887 (v1.4) December 4, 2014
Chapter 1: VC709 Evaluation Board Features
BB13 DDR3_B_D35 SSTL15 143 DQ35
AW12 DDR3_B_D36 SSTL15 130 DQ36
AY13 DDR3_B_D37 SSTL15 132 DQ37
AY12 DDR3_B_D38 SSTL15 140 DQ38
BA12 DDR3_B_D39 SSTL15 142 DQ39
AU12 DDR3_B_D40 SSTL15 147 DQ40
AU13 DDR3_B_D41 SSTL15 149 DQ41
AT12 DDR3_B_D42 SSTL15 157 DQ42
AU14 DDR3_B_D43 SSTL15 159 DQ43
AV13 DDR3_B_D44 SSTL15 146 DQ44
AW13 DDR3_B_D45 SSTL15 148 DQ45
AT15 DDR3_B_D46 SSTL15 158 DQ46
AR15 DDR3_B_D47 SSTL15 160 DQ47
AL15 DDR3_B_D48 SSTL15 163 DQ48
AJ15 DDR3_B_D49 SSTL15 165 DQ49
AK14 DDR3_B_D50 SSTL15 175 DQ50
AJ12 DDR3_B_D51 SSTL15 177 DQ51
AJ16 DDR3_B_D52 SSTL15 164 DQ52
AL16 DDR3_B_D53 SSTL15 166 DQ53
AJ13 DDR3_B_D54 SSTL15 174 DQ54
AK13 DDR3_B_D55 SSTL15 176 DQ55
AR14 DDR3_B_D56 SSTL15 181 DQ56
AT14 DDR3_B_D57 SSTL15 183 DQ57
AM12 DDR3_B_D58 SSTL15 191 DQ58
AP11 DDR3_B_D59 SSTL15 193 DQ59
AM13 DDR3_B_D60 SSTL15 180 DQ60
AN13 DDR3_B_D61 SSTL15 182 DQ61
AM11 DDR3_B_D62 SSTL15 192 DQ62
AN11 DDR3_B_D63 SSTL15 194 DQ63
AT22 DDR3_B_DM0 SSTL15 11 DM0
AL22 DDR3_B_DM1 SSTL15 28 DM1
AU24 DDR3_B_DM2 SSTL15 46 DM2
Table 1-5: DDR3 SODIMM Socket J3 Connections to the FPGA (Cont’d)
XCVX690T (U1) Pin Net Name I/O Standard DDR3 SODIMM Memory J3
Pin Number Pin Name
Send Feedback