Xinray XR-TE968H User manual
2.4G/5.8G Wireless Mini DVR
Usual Manual
2.4G /5.8G WirelessMini DVR
Thank you for purchasing this product. This handbook can lead you to use our product and the applied
program of its adding.
NOTES
1. We try our best to make the content correct and complete, but it can’t certify that there is no any
mistake and omit of the introduction.
2. Our company is only responsible for maintaining and repairing the problem of itself existing. We
aren’t responsible for personal data deleted and lost caused by wrong operation, product repair or other
case. We are also not responsible for any other indirect loss caused by this.
3. Any modify of software, hardware, introduction of this product will not be notified separately, and
our company owns the final explanation rights.
Content
Basic Information…….…………………………………………………………………1
Notes…………………………………………………………………………………….2
Buttons & Interface……………………………………………………….……………..3
How to Charge…………………………………………………………………………………………….4
Basic Operation.…………………………………………………………………………5
Recording & Photo………………………………………………………………………6
Motion Detect……………………………………………………………………………8
Play Video & Pictures..…………………………………………………………………10
Function Settings…………………………………………………………….…………12
System Settings……………………………………………………………………………………………17
Trouble Shooting…………………………………………………….………………… 23
Specification………………………………………………………….…………………24
Package Content…………………………………………………………………………26
‐1‐
Notes
Dear customers, thank you for choosing our products. We really hope our products can bring happiness
to you. Please read the following instructions carefully before using:
Forbid to use it in high temperature, high humidity environment, especially in the bathroom
with high temperature. 0~40℃is the best working temperature for DVR.
Avoid putting DVR at the place where the sunshine penetrates directly.
Please inserting or pulling out the SD card after DVR power off. If under working state, the huge
current will bring unpredictable damage to the machine.
Put it in the place where the children are not able to touch, in case it falling down or against
sharp objects, which will bring serious damage to the machine.
Please don’t dismantle the DVR without authorization. If any query, please contact with the
distributor or our company.
Please don’t change or poke the battery. If put the battery into fire, it will explode and hurt
people.
Please don’t use it as driving or doing the work, which need your high attention.
We suggest customer to copy the data in case any loss caused by unstable power supply.
Otherwise our company will not be responsible for any damage.
When inserting SD card, please make sure the inserting direction is correct. Otherwise it will
damage the card slot, which users need to bear by themselves.
DO NOT use this product to violate others’ privacy. Monitoring others’ activities without consent
is illegal and this product is not designed and manufactured for such purpose;
DO NOT use this product for any illegal activities. We shall not be responsible for any
consequences of illegal acts committed by the user.
Basic Information
Basic Information:
zDisplay: 5-inch HD screen (800X480pix).
zWireless Receiving：Built-in 2.4G/5.8G wireless receiving module.
zChannel Switch：Supports manual & automatic switch between 8 channels.
zAntenna: Folding hidden external antenna assures excellent wireless receiving.
zRecording: Supports seamless cycle and continuous video from wired/wireless
cameras
zPhoto：Supports function of taking pictures either from wired or wireless cameras.
zAV IN：TV-IN [NTSC / PAL].
zBattery：Built-in 3200mAh high capacity Li-battery, which continuous record over 10 hours.
zSpeaker: Built-in speaker of 1W.
zStorage: Supports up to 32GB TF card.
zLanguage: Supports multi-language.
zSupports Power-saving Mode: automatic shutdown, automatic off-screen.
zAutomatic upgrade: Supports system automatic upgrade.
Buttons & Interface
Tips for symbols
How to Charge
1. Notice before operation
Battery capacity symbols:
‐2‐
Tips: The possible reason for being unable to power on DVR is battery running out. Please operate it
after charging by AC adapter or PC.
2. How to charge
Charge 4~6 hours for fully charged. Unplug the charger until the battery status is full.
Notice:
A. This charger is for this machine use only. Do not leave the charger in humid place. Unplug the
charger and keep it well after charging. Do not repair, break down or remake the charger.
B. For better performance, please charge the brand new machine for more than 6 but less than 10
hours for the first time. New battery will reach best performance after a few times full charge and
discharge.
C. If no need to use in a long time, it’s recommended to charge the DVR every 2~3 months and
then keep it after switch off.
Basic Operation
1. Power On/Off:
Press “ ” to power on, DVR is on working state; long time press “ ” again to power it off.
2. Selection of wired/wireless receiving mode:
Plug in wired camera, DVR automatically switch to wired receiving mode; pull wired camera out, DVR
automatically comes into wireless receiving mode. When it’s in wireless receiving mode, screen will
show channels (CH1…CH8) and frequency (2.4G/5.8G).
3. Working mode switch (switcher located at the left corner):
When it switches to “ ”, DVR is in state of receiving/record/photo；
When it switches to “ ”, DVR is in the sate of play;
When it switches to “ ”, DVR is in the state of motion detection.
4. External Storage card
Only after storage card being plugged in, this DVR can record, photo. Screen will show symbol of SD
card & its left capacity.
5. Working as a U-disk
Connect DVR to computer and power it on, it will work as a U-disk. Open the removable disk in the
computer, you’ll find the videos and photos in “ RECORD” and “ PHOTO” files under “DICM”
directory.
Record & Photo
Power DVR on, and select working mode to “ ”, it is in recording/photo mode.
1. Photo: Under “ ” mode, press “ ” once, symbol “ ” flashes once, and get one picture.
2. Record: Under “ ” mode, press “ ” for 3 seconds, DVR in state of recording, and screen shows
“REC”. To end recording, press “ ”again, it will save automatically and exit. If not press “ ”, the
system will automatically save video in segments until storage card is full.
Record & Photo
While if “Overwrite” is turn on, not press “ ” to end recording, system will automatically save video in
segments. And when the card is full, it will overwrite the earliest recording and save the latest one, keep
‐3‐
cycle recording.
3. Channel Switch: Under wireless receiving mode, press “ ”/ “ ” to switch channels. Screen will
display your selected channel.
Record & Photo
3. Mute: Under “ ” mode, press “ ” to enter state of mute. Screen displays “MUTE”. Speaker no
sound; press “ ” again to recover sound.
Note: Mute setting will not affect earphone.
Motion Detect
1. Power DVR on, and select working mode to “ ”, it’s in mode of motion detect. Press “ ” to exit and
back to system/function menu.
2．Under “ ” mode, press “ ” for 3 seconds to enter into motion detect recording. When moving
objects appear, system will automatically start to record, and screen show “REC”. After 10 seconds
without moving objects, system will automatically end recording and save to exit, waiting next
motion. To end motion detect recording, press “ ”, it will save automatically and exit
3. If not press “ ” to end recording, the system will automatically save in segments until storage card
is full. While if “Overwrite” is turn on, not press “ ” to end recording, system will automatically save
in segments. And when the card is full, it will overwrite the earliest video and save the latest one,
keep cycle recording.
Note: Under wireless mode, please assure stable signal and no noisy, or it will mistakenly detected.
Play Video/Photo
When working mode selected to “ ”, it’s in the mode of play video & photo. Press “ ”/“ ” to select
“Photo” or “Video”. Press “ ” to exit and back to main menu.
1. Play Video: When select “Video”, press “ ” to enter into date folder. Press “ ”/“ ” to select date,
‐4‐
and press “ ” to enter into time phased video files. Press “ ”/“ ” to select, and press “ ” to play
video. Press“ ”/“ ” to adjust volume. Press “ ” long time to fast forward; press “ ” long time to
rewind; press“ ” to pause; press“ ” again to release pause; press “ ” to exit. Press“ ”/“ ” long
time to enter mode of fast forward/rewind, press “ ” again to fast forward X2、X4、X8，press “ ”
again to fast rewind 2X、4X、8X. Press “ ” to play. Press “ ” to exit
Play Video/Photo
2. Play Photos：Select “Photo”, and press “ ” to enter into photo files. Press “ ”/“ ” to select
pictures, then press “ ” to view. Press “ ” to view next one; press “ ” to view previous one. Press
“” to exit.
2. Delete photos/Videos：Under play working mode, press “ ”/“ ” to select files. Press “ ” to get
a delete dialogue box. Press “ ”/“ ” to select delete “All”/”Current”/ “Cancel”. Press “ ” to confirm.
Function Settings
Power DVR on, working mode switched to “ ”/ “ ”, press “ ” to enter into function and system setting
menu. Press “ ”/“ ” to select “Function”, then press “ ” to enter into function menu.
1. Channel Setting: Press “ ”/“ ” to select “Channel Setting”, and then press “ ” to enter.
Function Settings
1) Channel Switch Select: Press “ ”/“ ” to select “ Channel Switch Select”, and press “ ” to enter.
Press “ ”/“ ” to select channel and press “ ” to turn it off/on. Press “ ” to exit.
‐5‐
2）Auto Switch：Press “ ”/“ ” to select “Auto Switch”, and press “ ” to enter. Press “ ”/“ ” to
select “Off” / “On”, then press “ ” to confirm and exit.
Function Settings
3）Dwell Time：Press “ ”/“ ” to select “Dwell Time” and press“ ” to enter. Press “ ”/“ ” to adjust
dwell time. Then press “ ” to confirm and exit.
2. Recorder Resolution: Press“ ”/“ ” to select “ Recorder Resolution” and press “ ” to enter. Press
“”/“ ” to select “720X576” / “640X480”. Press “ ” to confirm and exit.
Function Settings
3. Frame Rate: Press“ ”/“ ” to select “Frame Rate” and press “ ” to enter. Press
“”/“ ”to select “30 FPS”/“25 FPS”, and press “ ” to confirm & exit.
4. Video Segment Sizes: Press “ ”/“ ” to select “ Video Segment Sizes”, then press “ ” to enter.
Press “ ”/“ ” to select “10 MIN”/“30MIN”/“60 MIN”. Press “ ” to confirm & exit
5.
6.
Function Settings
5. Overwrite: Press “ ”/“ ” to select “ Overwrite”, and press “ ” to enter. Press “ ”/“ ” to select
“Off”/ “On”, and press “ ” to confirm & exit. If “Overwrite” is on, DVR will cycle record, and save the
latest video.
‐6‐
6. Time Stamp: Press “ ”/“ ” to select “Time Stamp”, and press “ ” to enter. Press “ ”/“ ” to
select “Off”/ “On”, and press “ ” to confirm & exit. If it’s on, video will be saved with synchronous
time.
System Settings
Power DVR on, working mode switched to “ ”/ “ ”, press “ ” to enter into function & system setting.
Press “ ”/“ ” to select “System”; then press “ ” to enter into system menu.
1. Date time: Press “ ”/“ ” to select “Date Time”, and press “ ” to enter. Press “ ” again to move
the cursor, and press “ ”/“ ” to adjust date & time. Press “ ” to exit.
System Settings
2. Language: Press “ ”/“ ” to select “Language”, and press “ ” to enter. Press “ ”/“ ” to choose
your language. And press “ ” to confirm and exit.
3. Format：Press “ ”/“ ” to select “Format”, and press “ ” to enter. Press “ ”/“ ” to choose
“Yes”. Press “ ” to confirm & exit.
System Settings
‐7‐
4. Power Save: Press “ ”/“ ” to select “Power Save”, and press “ ” to enter:
1）Auto LCD Off：Press “ ”/“ ” to select “ Auto LCD Off”, and press “ ” to enter. Press “ ”/“ ” to
select “ 1 MIN”/ “5 MIN”/ “Off”, and press “ ” to confirm & exit. If turn on “ Auto LCD Off”, LCD
screen will automatically shut off when the set time is due. Press any key to recover screen display.
System Settings
2）Auto Power Off: Press “ ”/“ ” to select “ Auto Power Off”，and press “ ” to enter.
Press “ ”/“ ” to select “ 5 MIN” / “10 MIN” / “Off”, and press “ ” to confirm & exit. If turn on “
Auto Power Off”, DVR will automatically shut off when the set time is due.
5. Firmware Update：Press “ ”/“ ” to select “Firmware Update”, and press “ ” to enter. Press
“”/“ ” to select “Yes”，and press“ ” to start update. Please remember to save update file
“
zburnT_C11.run.elf
” at root directory of SD card.
System Settings
6. Default Setup: Press “ ”/“ ” to select “Default Setup”，and press “ ” to enter. Press “ ”/“ ”
to select “Yes” and press “ ” to confirm. Press “ ” to exit.
7. Memory Info: Press“ ”/“ ” to select “Memory Info”, and press “ ” to view capacity of SD card.
Press “ ” to exit.
System Settings
8. Version: Press “”/“ ” to select “Version”，and press “ ” to view version information. Press “ ”
‐8‐
to exit.
Trouble Shooting
Trouble Shooting:
1It can’t power on: Maybe no power. Recharging the DVR is ok;
2System halted: Press the RESET key to turn on player again;
3It can not play：Maybe the format of video file is not supported by this DVR, please convert it into
the supported format.
4The text is in messy code: Make sure the correct language is selected.
5It can’t upload / download files or can’t find the disk in PC: Replace USB cable/USB port.
6. It can not save file：SD card is not in DVR, please insert SD card; or SD card memory is full, please
delete some files to release memory; or there is damaged area in memory, please format it.
Specification
Items Value
2.4GHz–8
channels
CH1: 2414MHz; CH2: 2432MHz; CH3: 2450MHz; CH4: 2468MHz.
CH5: 2490MHz; CH6: 2510MHz; CH7: 2390MHz; CH8: 2370MHz
Within
5.8G—8
channels
CH1: 5865MHz; CH2: 5845MHz; CH3: 5825MHz; CH4: 5805MHz.
CH5: 5785MHz; CH6: 5765MHz; CH7: 5745MHz; CH8: 5725MHz
Beyond
5.8G—8
channels
CH1: 5705MHz; CH2: 5685MHz; CH3: 5665MHz; CH4: 5645MHz.
CH5: 5885MHz; CH6: 5905MHz; CH7: 5925MHz; CH8: 5945MHz
Sensitivity -92dB
Wireles
s
Receivi
ng
Receiving
distance 100 meters
TV system NTSC / PAL
AV IN Output
voltage 3.6-4.2 V
Active area 108mm(W) X 64.8mm(H)
Resolution 800 X 480 Pixel
HD 5-
inch
LCD
screen Luminance
for LCM 200 cd/
Active area 118mm(W) X 62.8mm(H)
Resolution 480 X 272 Pixel
Cape
clear 5-
inch
LCD
screen
Luminance
for LCM）300cd/
Resolution 720*576 / 640*480
Video
compress MPEG-AVI 30fps
Video
Play format MPEG-AVI
Audio Frequency 20HZ-20KHz stereo
‐9‐
Earphone
Output Left: 20MW+ right 20mW [16O](suit to largest volume)
Speaker 1W
Photo Format JPG/JPEG
Specification
Items Value
External SD card TF card 1GB-32GB（optional）
32GB recording
time 10-32 hours
Storage
1GB photos 15625pcs
PC Windows & Mac OS
Port USB 2.0
Operating
system Language Multiple
Voltage DC 5V
Current(receiving
mode) 660MA
Current( recording
mode) 680MA
Current（recording
with off-screen
mode）
340MA
AC adapter DC 5V 2A
Power
Built-in battery Li-battery 3200Mah
Wireless record ≥9.5 hours(off-screen); ≥5hours（on-screen）
Standby
time Wired record ≥12 hours(off-screen); ≥6hours（on-screen）*LED camera
not included.
Size (L x W x H) 131mm x 86mm x 18mm
Weight(g) 205g
Package Content
The following items are all in box. Please check:
DVR X 1unit
User manual X 1 PC
Stereo earphone X 1unit
USB Cable X1 PC
AC adapter X1 unit
Back holder for installation X 1 pc
Table of contents
