Xip NVR04 LION User manual

Network Video Recorder
XIP –NVR04 LION
User’s Manual
Version 1.3

NVR User’s Manual
1
Caution and Preventive Tips
Handle with care, do not drop the unit
Mount the unit in an equipment rack or place it on a solid, stable surface.
Indoor use only. Do not place the unit in a humid, dusty, oily, or smoky site.
Do not place it in an area with poor ventilation or in an area close to fire or other sources of
heat. Doing so may damage the unit as well as cause fire or an electric shock.
When cleaning is necessary, shut down the system and unplug the unit from the outlet
before uncovering the top cover. Do not use liquid cleaners or aerosol cleaners. Use only a
damp cloth for cleaning.
Always shut down the system prior connecting or disconnecting accessories, with the
exception of USB devices.
This symbol intends to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the
appliance.
This symbol intends to alert the user to the presence of unprotected “Dangerous
Voltage” within the product’s enclosure that may be strong enough to cause a
risk of electric shock.

NVR User’s Manual
2
Important Information
Before proceeding, please read and observe all instructions and warnings in this manual.
Retain this manual with the original bill of sale for future reference and, if necessary, warranty
service. When unpacking your unit, check for missing or damaged items. If any item is missing,
or if damage is evident, DO NOT INSTALL OR OPERATE THIS PRODUCT. Contact your
dealer for assistance.
WARNING
RISK OF EXPLOSION IF THE RTC BATTERY ON THE MAINBOARD IS REPLACED
WITH AN INCORRECT TYPE. DISPOSE THE USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.

NVR User’s Manual
3
Table of Contents
1. Overview .......................................................................................................................6
2. System Setup................................................................................................................7
2.1 Position the Unit .....................................................................................................7
2.2 Connect Devices to the Unit...................................................................................7
2.3Front Panel LEDs...................................................................................................8
2.4 Rear Panel Connectors..........................................................................................8
3. General System Setup ...............................................................................................10
3.1 USB Mouse Operation..........................................................................................11
3.1.2 Functional Keys.........................................................................................11
3.2 Enter OSD Setup Menu........................................................................................13
3.2.1 User Management.....................................................................................13
3.3 Reboot and Shutdown..........................................................................................15
3.3.1 HDD Auto Scan..........................................................................................16
3.4 System Date/time Setting.....................................................................................17
3.4.1 Set Date/time.............................................................................................17
3.4.2 Daylight Saving Time.................................................................................18
3.4.3 Network Time Protocol Setup ....................................................................18
3.5 IP Camera Setting................................................................................................19
3.5.1 IP Camera Information...............................................................................20
3.5.2 Connection Setup......................................................................................22
3.5.3 Device Setup .............................................................................................24
3.5.4 Activated....................................................................................................24
3.5.5 Status.........................................................................................................24
3.5.6 Copy Settings ............................................................................................25
3.6 Record Schedule/Quality Setting..........................................................................26
3.6.1 Schedule Setup .........................................................................................26
3.6.2 Preset Record Configuration .....................................................................27
3.6.3 Advance Schedule Setup ..........................................................................27
3.6.4 Data Lifetime Setup...................................................................................29
3.6.5 Circular Recording.....................................................................................30
3.6.6 Audio Recording........................................................................................30
3.6.7 Purge Data.................................................................................................30
3.6.8 Pre-Alarm Recording.................................................................................31
4. NVR Operation............................................................................................................32
4.1 View Live/Playback Videos...................................................................................32
4.1.1 Viewing Modes ..........................................................................................32

NVR User’s Manual
4
4.1.2 Digital Zoom...............................................................................................32
4.1.3 IP Camera Info...........................................................................................33
4.1.4 Sequence Display (8CH Models Only) ......................................................33
4.1.5 Playback Recorded Videos........................................................................33
4.2 Search Recorded Video .......................................................................................34
4.2.1 Search by Time..........................................................................................35
4.2.2 Calendar Search........................................................................................35
4.2.3 Search by Event ........................................................................................36
4.3 Video Export.........................................................................................................37
4.3.1 OSD Export Menu......................................................................................37
4.3.2 Quick Video Export....................................................................................39
4.4 Dome Control.......................................................................................................40
4.4.1 PTZ Controlling Buttons.............................................................................40
4.4.2 Set Preset Points.......................................................................................42
4.4.3 Call Preset Points......................................................................................42
4.4.4 Run Dome Camera Tour............................................................................43
4.5 UPnP Function .....................................................................................................43
4.5.1 Setting Up the NVR and the PC.................................................................43
4.5.2 UPnP NAT Traversal Function...................................................................44
4.6 System Log Exportation .......................................................................................44
5. Remote Monitoring Software.....................................................................................45
5.1 Remote Monitoring System Requirements...........................................................45
5.2 Software Installation.............................................................................................46
5.2.1 Change Internet Settings...........................................................................46
5.2.2 Install Remote Monitoring Software...........................................................49
5.2.2.1 Log in/Log off................................................................................50
5.2.2.2 Software Upgrades.......................................................................51
5.3 Basic Operation for Monitoring Remotely.............................................................51
5.3.1 View Live Video.........................................................................................51
5.3.1.1 Select Display Mode.....................................................................52
5.3.1.2 Operate Cameras with Dome Control ..........................................52
5.3.1.3 Digital Zoom of Camera Display...................................................53
5.3.2 Instant Recording.......................................................................................54
5.3.2.1 Record Video Instantly .................................................................54
5.3.2.2 Playback Instant Recorded Video ................................................54
5.3.3 Playback Video..........................................................................................54
5.3.3.1 Playback Remote Video...............................................................55
5.3.3.2 Playback Local *.drv Files ............................................................56
5.3.3.3 Playback Controls ........................................................................56
5.3.4 Verify Digital Signature ..............................................................................57

NVR User’s Manual
5
5.3.5 Search from Event List ..............................................................................57
5.3.6 Take a Snapshot........................................................................................58
5.3.7 Health Status of HDD.................................................................................58
5.3.8 Normal and Dual Streaming.......................................................................59
5.3.9 Remote Software Upgrade/ Reboot of Connected NVR............................59
5.3.10 Remote Monitoring Software Troubleshooting...........................................60
Appendix A: Keyboard Access Sketch ..........................................................................62
Appendix B: Manual IP Camera Activation....................................................................63

NVR User’s Manual
6
1. Overview
The XIP –NVR04 LION is a premium network video recorder that combines
the features of a time-lapse audio / video recorder, a multiplexer, and a video
server to create a single security solution.
The XIP –NVR04 LION is equipped with Power over Ethernet (PoE) ports
that eased the connection to IP cameras with just one single cable covering
power and network sources. The Plug and Play function helps users to
automatically setup IP cameras once they are connected. IP cameras will be
set to provide dual streaming to the NVR for recording and live monitoring. In
addition, the Full HD (1080P) video at local monitor display presents high
quality images.
The XIP –NVR04 LION is pre-installed with remote viewing and configuration
software, which is a Web-browser plug-in allowing users to view live or
recorded video images, and enables remote configuration. The remote
software is stored in the XIP –NVR04 LION and deployed over a LAN, WAN
or Internet connection to remote Windows-based computers. This simplifies
the installation and maintenance of the software components so all remote
users are using the same software coming from the unit.
In addition, the central management software and smart phone applications
also provide convenience to monitor at anywhere and anytime.

NVR User’s Manual
7
2. System Setup
The notices and introduction on system installation will be described
particularly in this chapter. Please follow the description to operate the unit.
In order to prevent the unit from data loss and system damage that caused by
a sudden power fluctuation, use of an Uninterruptible Power Supply (UPS) is
highly recommended.
2.1 Position the Unit
Firstly, note to position/mount the NVR in a proper place and be sure to power
off the unit before making any connections. The placed location should avoid
hindering or blocking the unit from airflow. Enough airflow is needed to protect
the unit from overheating. The maximum allowable temperature of operating
environment is 40°C.
The unit utilizes heat-conducting techniques to transfer internal heat to the
case, especially to the bottom side of the unit.
NOTE: Be sure the rubber feet are not removed, and always leave a
space for air ventilation on the unit’s bottom side.
2.2 Connect Devices to the Unit
This section lists some notices that should be given before making any
connections to the NVR.
Connecting Required Devices
Before powering on the unit, cameras, a main monitor and a USB mouse
should be connected to the unit for basic operation.
Connecting Short-term Device
If any short-term devices shall be installed to the NVR as parts of the unit
system, such as USB ThumbDrive®or any USB devices, etc., make sure
those devices are connected only after the unit is powered on. The reason is
that the NVR can recognize the external devices only after the power-on
process is done completely.

NVR User’s Manual
8
2.3 Front Panel LEDs
The LEDs on the front panel of the NVR are described as follow.
Network LED
The LED lights up when the NVR is connected to a network and
blinks when data is being transferred.
REC LED
The LED blinks while the NVR is recording.
Alarm LED
The LED lights up when an alarm is triggered.
2.4 Rear Panel Connectors
There are various connectors on the rear panel for the NVR installations. The
connectors are described as the followings.
Audio Out
The NVR provides an Audio Out port for
connection to an audio output device, such as an
amplified speaker.
VGA
The VGA connector is for connection to a VGA
monitor.
HDMI
The HDMI connector is for connection to a HDMI
monitor that transfers data digitally to deliver the
best display quality.

NVR User’s Manual
9
e-SATA (Optional)
Users can connect an e-SATA storage device to
expand the storage size of the NVR. Note that this
port is only available for 4CH models.
NOTE: The NVR MUST be shutdown before
detaching the e-SATA storage device.
LAN (RJ-45)
The NVR is capable of networking and it allows
videos to be viewed over the LAN network or the
internet via the IE browser.
USB Connectors
The USB connectors are provided for users to
connect external USB devices to the unit, such as
ThumbDrive®, or an USB mouse.
PoE Ports
Each PoE port is for direct connection to an IP camera to provide power
and network with just one RJ-45 cable.
Power Jack
Connect the power supply cord and the power
adaptor shipped with the NVR.
NOTE: Use of other power supply cords or power adaptors may cause
overloading.