XM Xpress RC User manual

1 2 3 4
8
7
6
5
TIP! When routing the cable:
Make sure any extra cable does not interfere with normal car operation.•
Make sure there are no knots or twists in the cable as these can aect signal•
reception and damage the cable.
Include enough slack in the cable to accommodate open doors or trunk lids.•
To fasten the cable, use electrical tape or zip ties, and secure the cable in areas•
where hinges don’t pinch the cable.
Hide extra cable in the trim.•
Step 1: Plan the Installation
Select an area on the dashboard you want to place the car cradle. This is where you1
will install the swivel mount.
Determine if you want the swivel mount installed vertically or horizontally. See2 Step 3:
Install the Swivel Mount for more information.
TIP! An adhesive pad is used to mount the swivel mount to the dashboard. The adhesive
requires 24 hours to cure. Make sure you provide yourself the proper amount of time to install
your car kit. See Step 3: Install the Swivel Mount for more information.
Determine which connection method you plan to use in order to receive the XM3
signal:
XM SureConnect (included)•
Cassette adapter (Included)•
Audio Cable (Sold Separately)•
FM Direct Adapter (Sold Separately)•
WARNINGS:
When using this product it is always important to keep your eyes on the road and hands on•
the wheel. Not doing so could result in personal injury, death, and/or damage to your Xpress
family radio, accessories, and/or to your vehicle or other property.
Your Xpress family radio should be placed in your vehicle where it will not interfere with the•
function of safety features, e.g., deployment of airbags. Failure to correctly place your Xpress
family radio may result in injury to you or others if the unit becomes detached during
an accident and/or obstructs the deployment of an airbag.
6 Turn the swivel to accommodate the car cradle and radio. Adjust the
tension by turning the center screw.
TIP! To remove the swivel mount, warm the adhesive pad with a hair dryer for
several minutes to soften the adhesive, and then carefully lift the adhesive pad with
your ngers or a spoon. You can reinstall the swivel mount using the extra adhesive
pad in the swivel mount preparation kit.
If you placed the antenna on the rear of the car:
Route the cable across the top of the rear window.•
• Gently pry up the rubber weather seal and tuck the cable underneath it.
Route the cable into the trunk and through any existing wire passages or•
cargo passages to the rear seats.
Tuck the cable under•
the door jam trim, or
under the carpet, and
route the cable to the
car cradle.
Step 3: Install the Swivel Mount
CAUTION! The adhesive used with the swivel mount may make it dicult to remove
the swivel mount later. Do not install the swivel mount on leather surfaces, and make
sure the air temperature is at least 60°F (15°C).
Select whether you want to install1
the swivel mount vertically or
horizontally on the dashboard.
Locate a flat surface for the swivel mount2
on the dashboard. Make sure there is
ample room for the car cradle and radio
when installed.
Use the alcohol pads in the swivel mount preparation kit to clean the3
surface. Let it dry thoroughly.
Remove the adhesive liner from the swivel mount.4
Position the swivel mount where you want it, then press and hold the swivel5
mount in place for 30 seconds.
IMPORTANT! Let the adhesive cure for 24 hours before connecting the car cradle
and radio to the swivel mount.
Step 2: Mount the XM Car Antenna
1 Place the car cradle on the dashboard.
You will connect it to the swivel mount later on.
TIP! Make sure the door does not pinch the cable when closed.
TIP! Always cross the weather seals at the lowest point possible to reduce water leaks.
TIP! Always hand wash or use brushless or touch-free car washes to avoid damaging
the XM SureConnect.
Select a suitable location on the outside of your car for the antenna.2
For example, on the roof near the windshield or rear window.
TIP! When selecting a location, consider any accessories that your car has, such as a
luggage rack, and how often you use the accessories. Select a location where the
antenna won’t be covered or blocked as this could interfere with signal reception.
3 Gently place the antenna in
the location you selected. The
antenna has a strong magnet that
sticks to any metallic surface.
Route the antenna cable.4
If you placed the antenna on the front of the car:
Route the cable across the top of the windshield.•
• Gently pry up the rubber weather seal and tuck the cable underneath it.
Follow the weather seal down to the door jam.•
Tuck the cable into the door jam and up to the dash, or under the•
carpet, and route the cable to the car cradle.
Cassette Adapter
Magnet
Thank you for purchasing the Universal Xpress Car Kit. You are one step closer
to experiencing XM Satellite Radio. The Universal Xpress Car Kit works with all of
the Xpress family of radios including the XpressEZ, the Xpress, the XpressRand the
XpressRC. Throughout the guide we’ll refer to them as the Xpress family of radios.
Works with:
XpressEZ Xpress XpressRC
XpressR
XM Car Antenna
Swivel Mount
Swivel Mount
Preparation Kit
Car Power Adapter
XM SureConnect
Step 4: Connect Your Xpress Family Radio
Connecting the Car Cradle to the Swivel Mount
To connect the car cradle vertically onto the swivel mount, slide the car cradle down onto the
swivel mount. The retainer tab should be inserted into the groove on the back of the car cradle.
Make sure it snaps rmly in place.
To connect the car cradle horizontally onto the swivel mount, slide car cradle onto the retainer
tab. The retainer tab should be inserted into the groove on the base of the car cradle.
Car Cradle
Receiving the XM Signal through Your Car Stereo
There are several ways to receive the XM Signal through your car stereo.
Select the one that best meets your needs (Audio output cable and FM Direct Adapter
are sold separately):
• CassetteAdapter(Included) Use a cassette adapter if your car’s stereo
system has a built-in cassette player.
• AudioOutputCable: If your car stereo has an audio input jack, you
can plug this cable into it to receive audio reception.
• XMSureConnect: (Included) You can listen to your Xpress family radio
through your car’s stereo system by using the built-in FM modulator
in your Xpress radio and the XM SureConnect. Simply nd an unused
FM frequency on your car stereo system, and tune your Xpress family radio
into that same frequency. To install the XM SureConnect, follow the
XM SureConnect installation instructions.
• FMDirectAdapter: The FM direct adapter connects your Xpress family
radio directly to your car’s stereo system and antenna.You can listen to
your Xpress family radio through your car’s stereo system by using the
built-in FM modulator in your Xpress family radio. If you choose this option,
have the adapter professionally installed.
What’s in the Box?

9 10 11
14
13
12
Plugging Everything In
Plug the antenna into1 ANT IN on the car cradle.
If you are using the XM SureConnect, see the XM SureConnect installation
guide to connect XM SureConnect to the car cradle and antenna.
Plug the car power adapter into2 DCINon the car cradle.
If you selected a cassette adapter (included) or the audio output3
cable, plug this option intoAUDIOOUT.
Make sure your Xpress radio is placed securely in the car cradle, then turn4
on your Xpress radio.
If using either the XM SureConnect or FM direct adapter, follow the5
instructions in Step 5 to find/select an unused FM frequency.
TIP! If you experience interference when listening to an AM channel, unplug the
power to your Xpress family radio to reduce interference.
Step 5: Finding an FM Frequency
If you choose either the XM SureConnect or FM direct adapter, your Xpress family radio
uses a built-in FM modulator to receive XM Satellite Radio programming on an unused FM
frequency.
FindinganunusedFMfrequencyissimple:
Press1 Menu.
Press the dial to select2 FMFrequency.
Turn the dial to scroll through the FM frequencies.3
By default, the FM modulator is OFF.
To select a frequency, press the dial.4
Tune your car radio to the selected FM frequency.5
TIP! Go to http://www.xmradio.com/fmlocator/ and search for unused FM frequencies
in your listening area.
NOTE! If the built-in FM modulator does not provide satisfactory performance, try one
of the other options.
Audio Out Option
Cassette or audio
cable
Universal Xpress Car Kit
Installation Guide
FCC Statement
The power cable supplied with your device has ferrite beads at one or both ends. It is the responsibility of
the user to use the power cable with the ferrite beads.
The user is cautioned that changes or modications not expressly approved by XM
Satellite Radio Inc. can void the user’s authority to operate this device.This device complies with Part 15 of
the FCC Rules. Operation is subject to the following two conditions:
 • Thisdevicemaynotcauseharmfulinterference.
 • Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the installation instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•Reorientorrelocatethereceivingantennaoftheaectedreceiver.
•IncreasetheseparationbetweentheXMequipmentandtheaectedreceiver.
•ConnecttheXMequipmentintoanoutletonacircuitdierentfromthattowhichtheaectedreceiver 
is connected.
•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
WARNING! The FCC and FAA have not certied this Satellite Radio Receiver for use in any aircraft
(neither portable nor permanent installation). Therefore, XM Satellite Radio cannot support this type
of application or installation
Audiovox 12 Month Limited Warranty
AUDIOVOXELECTRONICSCORPORATION(theCompany)warrantstotheoriginalretailpurchaserofthisproductthatshouldthis
product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months
from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company’s
option) without charge for parts and repair labor.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (for
example, dated bill of sale), specification of defect(s), transportation prepaid, to an approved warranty station or the Company at the
address shown below.
This Warranty does not extend to the elimination of externally generated static or noise, to costs incurred for installation, removal
or reinstallation of the product, damage to speakers, accessories, or vehicle and home electrical systems, malfunction of satellite
transmissions, repeater signal, or receiver unit.
This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged
through alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial
number/bar code label(s).
THEEXTENTOFTHECOMPANY’SLIABILITYUNDERTHISWARRANTYISLIMITEDTOTHEREPAIRORREPLACEMENTPROVIDEDABOVE
AND,INNOEVENT,SHALLTHECOMPANY’SLIABILITYEXCEEDTHEPURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY
WARRANTY HEREUNDER INCLUDING ANY IMPLIEDWARRANTY OF MERCHANTABILITY MUST BE BROUGHTWITHIN A PERIOD OF 48
MONTHS FROM THE DATE OF ORIGINAL PURCHASE, IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED,
WHATSOEVER.NopersonorrepresentativeisauthorizedtoassumefortheCompanyanyliabilityotherthanexpressedhereinin
connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequen-
tial damage so the above limitations or exclusions may not apply to you.This Warranty gives you specific legal rights and you may
also have other rights which vary from state to state.
USA:AUDIOVOXELECTRONICSCORPORATION,150MARCUSBLVD.,HAUPPAUGE,NEWYORK11788(1-800-645-4994)
CANADA:CALL1-800-645-4994FORLOCATIONOFWARRANTYSTATIONSERVINGYOURAREA
XM SureConnect Option
XM Antenna
XM Antenna
Power Adapter Power Adapter
Cassette Adapter
Audio Output Cable
or
XM SureConnect
Car Cradle Car Cradle
XMC-10A
Audiovox Electronics Corporation
150 Marcus Blvd.
Hauppauge,NewYork11788
U.S.A.
18006454994
www.audiovox.com
XM and related logos are registered
trademarks of XM Satellite Radio Inc.
All other trademarks are property of
their respective owners.
©2008 Audiovox Electronics
Corporation. All rights reserved.