XPOtool 62997 User manual

Operation Manual
Industrial Vacuum Cleaner Wet Dry 1000W
62997
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific-
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

The information contained in this document may alter at any time without previous notice. It is prohib-
ited to copy or spread any parts of this document in any way without prior written allowance. ll rights
reserved.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this
operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure
that the operating manual is complete, faultless and up to date, mistakes cannot be entirely avoided.
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing
from you.
Send an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
Do you wish to pick goods up? Our pick-up address is:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
Germany
To shorten the waiting time and allow for a rapid on-site transaction, we ask you to call us previously
or placing your order via the webshop.
E-mail: [email protected]
Tel:[phone]
Fax: [phone]
To return orders for exchange, repair or for other purposes, please use the following address. tten-
tion! To allow for a smooth execution of your complaint or return, it is important to contact our cus-
tomer service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: service@ iltec.info
Tel:[phone]
Fax: [phone]
https://www.XPOtool.com rticle 62997 Page 2
The Tool Experts
04 2021-1

Introduction
Thank you for purchasing this quality product. To minimize the risk of injury e urge that our cli-
ents take some basic safety precautions hen using this device. Please read the operation in-
structions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety instructions
Caution! Before cleaning or servicing the appliance, the mains plug must be disconnected from the
mains.
•Attention! Read the operating instructions carefully before assembly and commissioning.
•Check that the mains voltage corresponds to the information on the type plate
•Only connect to a proper 220-240 volt, 50Hz socket. fuse of at least 13 is required.
•Disconnect the mains plug from the mains when: the appliance is not in use, before opening
the appliance, before cleaning and maintenance.
•Never clean with solvents
•Never disconnect the appliance from the mains by unplugging the power cable.
•Never leave the unit unattended when it is ready for use.
•Take care not to damage the power cable by running over it, crushing it, stretching it, etc.
•The unit must not be operated if the power cable is not in perfect condition.
•If the power cable is damaged, it must be replaced by a qualified electrician to avoid a haz-
ard.
•Caution! The following objects must never be vacuumed: burning matches, glowing ashes
and cigarette butts, flammable, corrosive, inflammable or explosive substances, vapours
and liquids.
•The unit is not suitable for vacuuming dust that is hazardous to health.
•Store the unit in a dry place.
•Do not operate the unit if it has a defect.
•Maintenance work should only be carried out by a qualified specialist.
•Use the unit only for work for which it is intended.
•Be very careful when cleaning stairs.
•Use only original accessories and spare parts.
•This appliance is not intended to be used by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person re-
sponsible for their safety.
•Children should be supervised to ensure that they do not play with the appliance.
Optional po er socket
•IPX4 protection is only guaranteed if an IPX4 plug is connected to the socket outlet of the
unit or the cover of the socket outlet is closed.
•The max. load of the socket is 2000W.
https://www.XPOtool.com rticle 62997 Page 3
The Tool Experts
04 2021-1

Part description
1Handle 10 Flexible vacuum tube
2On/Off switch 11 Vacuum tube
3Upper part 12 ir inlet
4Filter basket 13 Large vacuum nozzle
5Safety float valve 14 Dust bag
6Clamp 15 Water pipe
7Container 16 Joint nozzle
8Vacuum hose connection 17 Power socket
9Castors
https://www.XPOtool.com rticle 62997 Page 4
The Tool Experts
04 2021-1

Nozzle overvie
Assembly
https://www.XPOtool.com rticle 62997 Page 5
The Tool Experts
04 2021-1

Notice! Figure 6a:Use the foam filter supplied for wet vacuuming. Figure 6b:Use the supplied dust bag
for dry vacuuming.
Cleaning by et vacuum cleaner
•Disconnect the mains plug before changing the filter (picture 1).
•Pull the foam filter supplied over the filter basket (picture 2) for wet suction.
•Insert the plug and turn on the switch, then the appliance starts to work (figure 4 & 5a or
5b).
•Notice! (Depending on the model) If you slide the switch to the "I" position, the vacuum
cleaner works; if you slide the switch to the "O" position, the vacuum cleaner does not work.
If the appliance connected to the socket works, the vacuum cleaner also works 3-5 seconds
later. If the appliance stops working, the vacuum cleaner also stops working.
•The external device for the power of the socket is below 2000W.
•The dust bag supplied is not suitable for wet vacuuming!
Dry vacuum cleaning
•Before changing the filter, disconnect the mains plug (Figure 1). Then remove the bag and
empty the dust or replace the bag. Put the dust bag on the connection (figure 2) to vacuum
dry.
•Connect the mains plug to the mains and turn on the switch, then the appliance starts to work
(picture 5 & 6a or 6b).
https://www.XPOtool.com rticle 62997 Page 6
The Tool Experts
04 2021-1

•Notice! (Depending on the model) If you slide the switch to the "I" position, the vacuum
cleaner works; if you slide the switch to the "O" position, the vacuum cleaner does not work. If
the appliance connected to the socket works, the vacuum cleaner also works 3-5 seconds
later. If the appliance stops working, the vacuum cleaner also stops working.
•The external device for the power of the socket is below 2000W.
•The dust bag is only suitable for dry vacuuming!
Cleaning and maintenance
•Disconnect the mains plug before maintenance (figure 1).
•Remove the foam filter (figure 3) and wash it with water (figure 5).
•Important! Do not use detergents to clean the filter. The filter must be thoroughly dry be -
fore using the appliance.
https://www.XPOtool.com rticle 62997 Page 7
The Tool Experts
04 2021-1

Disposal regulations
EU guidelines regarding the disposal of scrap electric appliances (WEEE, 2012/19/EU) were imple-
mented in the law related to electrical and electronic equipment and appliances.
ll WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out
wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the
domestic waste.
The company WilTec Technik GmbH has been registrated in the German registry E R under the
WEEE-registration number DE45283704.
Disposal of used electrical and electronic appliances
(intended for use in the countries of the European
Union and other European countries with a separate
collection system for these appliances).
The logo on the article or on its packaging points out
that this article must not be treated as normal house-
hold waste but must be disposed to a recycling collec-
tion point for electronic and electrical waste equip-
ment. By contributing to the correct disposal of this art-
icle you protect the environment and the health of your
fellow men. Environment and health are threatened by
inappropriate disposal.
Materials’ recycling helps reduce the consumption of raw materials.
dditional information on recycling this article can be provided by your local community, municipal
waste disposal facilities or the store where you purchased the article.
ddress:
WilTec Wildanger Technik GmbH
Königsbenden 12 / 28
D-52249 Eschweiler
Important notice:
The reprint or reproduction, even of excerpts, and any commercial use, even in part of this instructions
manual require the written permission of WilTec Wildanger Technik GmbH.
https://www.XPOtool.com rticle 62997 Page 8
The Tool Experts
04 2021-1