XPower P-200T User manual

P-200T / P-200AT / P-230AT
(115V / 60Hz)

XPOWER Mini Air Movers are certified professional level multifunctional utility blower fans with the most
efficient engineering design
Features:
• Low power draw with high velocity air flow from 600 to 800 CFM
• Super quiet motor and super lightweight
• Easy carrying handle and stackable up to 4 units high.
• Easy and quick to disassemble for thorough cleaning and service.
• Safety certified 10' power cord.
• Easy cord wrap on handle.
• 3-hour timer.
• 3-speed switch.
• Durable and rugged housing.
• 4 air flow positions (0°, 20° Kickstand, 45° and 90°).
45°

XPOWER Mini Air Movers are intended to move air and to dry small areas where the large air mover is not
applicable such as crawl spaces, inside cabinets, under counters, inside ceilings, basements, etc. The Mini
Air Mover can also be used as high velocity fan for household indoor/outdoor use.
1. XPOWER Mini Air Movers are shipped ready-to-use. Prior to
plugging the unit into the power source, inspect completely for
any shipping damage.
2. Plug the electrical cord into the power outlet.
3. Carefully place the Mini Air Mover unit on a stable, flat dry
surface.
4. The unit is capable to be used at 4 different angles to direct air
flow.
5. Turn the switch to desired speed and make sure unit operates
normally.
6. Mini Air Movers in operation must be supervised at all times.
Air Movers can
be stacked
(up to 4) on
their sides for
storage.
NOTICE:
Stacking feature
is not secure for
transportation.
(For P-200AT & P-230AT models)
TM

1. To prevent electric shock, do not operate the unit in standing water. Never plug in or unplug the
unit with wet hands or while standing in water.
2. To avoid risk of injury, do not direct air flow at face or body.
3. To reduce the risk of fire or electric shock, do not use the Mini Air Mover with any solid-state speed
control device.
4. Use only with GFCI protected receptacles. Please contact a qualified electrician for verification and /
or installation of a GFCI receptacle if necessary.
5. Do not operate the Mini Air Mover with a damaged cord or plug. Discard the unit or return it to an
authorized service facility for examination and/or repair.
6. Unplug the Mini Air Mover from the power supply before servicing or cleaning.
7. Do not run the power cord under carpeting. Do not cover the power cord with throw rugs, runners,
or similar coverings. Place the power cord away from traffic area to prevent tripping.
8. Do not allow children to play with or around the Mini Air Mover at any time.
9. Do not move or carry the Mini Air Mover while unit is operating.
10. Mini Air Movers in operation must be supervised at all times.

Air Mover
vibrates
1. To keep the Mini Air Mover clean, use a damp cloth to wipe the surface of the housing.
2. Never clean the Mini Air Mover with water.
3. When not in use, unplug and store the Mini Air Mover in a dry indoor place out of reach of
children.
4. Always disconnect the Mini Air Mover from its power source before performing any
maintenance or cleaning.

Model P-200T P-200AT P-230AT
Volt / Frequency 115V / 60Hz 115V / 60Hz 115V / 60Hz
Power 1/8HP 1/8HP 1/5HP
Amp 1.5 Amps 1.5 Amps 2.3 Amps
Rated Airflow (On High)600 CFM 600 CFM 800 CFM
RPM (Low / Medium / High)1100 / 1250 / 1500 1100 / 1250 / 1500 1000 / 1250 / 1500
Speeds Three Three Three
Built-In Power Outlet / Daisy Chain No Yes Yes
3-Hour Timer Yes Yes Yes
Positions 4(0°, 20° Kickstand,45°, 90°) 4 (0°, 20° Kickstand,45°, 90°) 4 (0°, 20° Kickstand,45°, 90°)
Unit / Box Weight 8.5 Lbs./ 9.7 Lbs. 8.7 Lbs./ 9.9 Lbs. 9.9 Lbs./ 11.1Lbs.
Unit / Box Size (L x W x H)10.7”x12.4”x13.3” / 13.6”x12.8”x11”10.7”x12.4”x13.3” / 13.6”x12.8”x11”10.7”x12.4”x13.3” / 13.6”x12.8”x11”
Power Cord (Length/Size) 10’/18AWG 10’/14AWG 10’/14AWG
Overheating Protection Thermally Protected Thermally Protected Thermally Protected
Housing Injection Mold / Polypropylene (PP) Injection Mold / Polypropylene (PP) Injection Mold / Polypropylene (PP)
Safety Certificates ETL / C-ETL ETL / C-ETL ETL / C-ETL

Call for a Return Merchandise Authorization (RMA) number through Service Department
and obtain ship back instructions.
Have original proof of purchase.
Use original none damaged packaging or Industrial certified packaging method.
A.
B.
C.
This Warranty does not cover signs of misuse including, but not limited to, a unit that has been
dropped, subjected to water damage, tampered with, improper voltage use and unauthorized
maintenance and repairs. The POWER CORD is not covered by the warranty.
XPOWER Warranty covers the unit from defects in materials and craftsmanship. The Warranty
covers normal use for a term of one year from the original date of purchase including parts, labor
and one way shipping.

200 Series Parts List
Capacitor
1
3
5
7
9
11
13
15
2
6
8
10
12
14
Timer & Switch Plate 4-1 & 4-2 Switch Knob & Timer Knob
4-2
4-1
15

More XPOWER products available:
Air Movers
400 Series: P-400, X-400, X-400A, X-430TF
600 Series: P-600, X-600, X-600A, P-630, X-630
800 Series: P-800(H), X-800(H), X-800TF(H), P-830(H), X-830(H)
Force Dryers & Wall Dryer
B-3J, B-5J, B-5W
Blowers
BR-2C01A, BR-201A, BR-232A, BR-252A, BR-282A
Axial Fan
X-41ATR
Pet Dryers
B-2, B-3, B-4, B-5, B-16, X-430TF+MDK, X-800TF+MDK
220~240V models are also available for oversea markets. please check our
website XPOWER.WS for more detail...

Please complete and mail or fax this form for your product warranty. For multiple units, please list serial numbers on a separate
sheet of paper. Address: XPOWER MANUFACTURE, INC, 220 Clary Avenue San Gabriel, CA 91776, USA
Tel: [phone]; Fax: [phone]
Company Name / Contact Person / Title
State / Province Zip Country

XPOWER Mini Air Movers are certified professional level multifunctional utility blower fans with the most
efficient engineering design
P-200T / P-200AT / P-230AT
(115V / 60Hz)
Features:
• Low power draw with high velocity air flow from 600 to 800 CFM
• Super quiet motor and super lightweight
• Easy carrying handle and stackable up to 4 units high.
• Easy and quick to disassemble for thorough cleaning and service.
• Safety certified 10' power cord.
• Easy cord wrap on handle.
• 3-hour timer.
• 3-speed switch.
• Durable and rugged housing.
• 4 air flow positions (0°, 20° Kickstand, 45° and 90°).
45°

XPOWER Mini Air Movers are intended to move air and to dry small areas where the large air mover is not
applicable such as crawl spaces, inside cabinets, under counters, inside ceilings, basements, etc. The Mini
Air Mover can also be used as high velocity fan for household indoor/outdoor use.
1. XPOWER Mini Air Movers are shipped ready-to-use. Prior to
plugging the unit into the power source, inspect completely for
any shipping damage.
2. Plug the electrical cord into the power outlet.
3. Carefully place the Mini Air Mover unit on a stable, flat dry
surface.
4. The unit is capable to be used at 4 different angles to direct air
flow.
5. Turn the switch to desired speed and make sure unit operates
normally.
6. Mini Air Movers in operation must be supervised at all times.
Air Movers can
be stacked
(up to 4) on
their sides for
storage.
NOTICE:
Stacking feature
is not secure for
transportation.
(For P-200AT & P-230AT models)
TM

1. To prevent electric shock, do not operate the unit in standing water. Never plug in or unplug the
unit with wet hands or while standing in water.
2. To avoid risk of injury, do not direct air flow at face or body.
3. To reduce the risk of fire or electric shock, do not use the Mini Air Mover with any solid-state speed
control device.
4. Use only with GFCI protected receptacles. Please contact a qualified electrician for verification and /
or installation of a GFCI receptacle if necessary.
5. Do not operate the Mini Air Mover with a damaged cord or plug. Discard the unit or return it to an
authorized service facility for examination and/or repair.
6. Unplug the Mini Air Mover from the power supply before servicing or cleaning.
7. Do not run the power cord under carpeting. Do not cover the power cord with throw rugs, runners,
or similar coverings. Place the power cord away from traffic area to prevent tripping.
8. Do not allow children to play with or around the Mini Air Mover at any time.
9. Do not move or carry the Mini Air Mover while unit is operating.
10. Mini Air Movers in operation must be supervised at all times.
Model P-200T P-200AT P-230AT
Volt / Frequency 115V / 60Hz 115V / 60Hz 115V / 60Hz
Power 1/8HP 1/8HP 1/5HP
Amp 1.5 Amps 1.5 Amps 2.3 Amps
Rated Airflow (On High)600 CFM 600 CFM 800 CFM
RPM (Low / Medium / High)1100 / 1250 / 1500 1100 / 1250 / 1500 1000 / 1250 / 1500
Speeds Three Three Three
Built-In Power Outlet / Daisy Chain No Yes Yes
3-Hour Timer Yes Yes Yes
Positions 4(0°, 20° Kickstand,45°, 90°) 4 (0°, 20° Kickstand,45°, 90°) 4 (0°, 20° Kickstand,45°, 90°)
Unit / Box Weight 8.5 Lbs./ 9.7 Lbs. 8.7 Lbs./ 9.9 Lbs. 9.9 Lbs./ 11.1Lbs.
Unit / Box Size (L x W x H)10.7”x12.4”x13.3” / 13.6”x12.8”x11”10.7”x12.4”x13.3” / 13.6”x12.8”x11”10.7”x12.4”x13.3” / 13.6”x12.8”x11”
Power Cord (Length/Size) 10’/18AWG 10’/14AWG 10’/14AWG
Overheating Protection Thermally Protected Thermally Protected Thermally Protected
Housing Injection Mold / Polypropylene (PP) Injection Mold / Polypropylene (PP) Injection Mold / Polypropylene (PP)
Safety Certificates ETL / C-ETL ETL / C-ETL ETL / C-ETL

Call for a Return Merchandise Authorization (RMA) number through Service Department
and obtain ship back instructions.
Have original proof of purchase.
Use original none damaged packaging or Industrial certified packaging method.
A.
B.
C.
Air Mover
vibrates
This Warranty does not cover signs of misuse including, but not limited to, a unit that has been
dropped, subjected to water damage, tampered with, improper voltage use and unauthorized
maintenance and repairs. The POWER CORD is not covered by the warranty.
XPOWER Warranty covers the unit from defects in materials and craftsmanship. The Warranty
covers normal use for a term of one year from the original date of purchase including parts, labor
and one way shipping.
1. To keep the Mini Air Mover clean, use a damp cloth to wipe the surface of the housing.
2. Never clean the Mini Air Mover with water.
3. When not in use, unplug and store the Mini Air Mover in a dry indoor place out of reach of
children.
4. Always disconnect the Mini Air Mover from its power source before performing any
maintenance or cleaning.

200 Series Parts List
Capacitor
Please complete and mail or fax this form for your product warranty. For multiple units, please list serial numbers on a separate
sheet of paper. Address: XPOWER MANUFACTURE, INC, 220 Clary Avenue San Gabriel, CA 91776, USA
Tel: [phone]; Fax: [phone]
Company Name / Contact Person / Title
State / Province Zip Country
1
3
5
7
9
11
13
15
2
6
8
10
12
14
Timer & Switch Plate 4-1 & 4-2 Switch Knob & Timer Knob
4-2
4-1
15

More XPOWER products available:
Air Movers
400 Series: P-400, X-400, X-400A, X-430TF
600 Series: P-600, X-600, X-600A, P-630, X-630
800 Series: P-800(H), X-800(H), X-800TF(H), P-830(H), X-830(H)
Force Dryers & Wall Dryer
B-3J, B-5J, B-5W
Blowers
BR-2C01A, BR-201A, BR-232A, BR-252A, BR-282A
Axial Fan
X-41ATR
Pet Dryers
B-2, B-3, B-4, B-5, B-16, X-430TF+MDK, X-800TF+MDK
220~240V models are also available for oversea markets. please check our
website XPOWER.WS for more detail...