XPower P-800I User manual

P-800I / P-800HI
P-830I / P-830HI
P-815I
INFLATABLE BLOWERS
OWNER’S MANUAL

XPOWER Inflatable Blowers are ETL/CETL Certified Professional Level Multifunctional Inflatable Blowers with
the most efficient engineering design.
Features:
• Low power draw with a high velocity air flow from 3,200 to 3,600 CFM
• Quiet motor and lightweight.
• Easy carrying handle and stackable up to 3 units high.
• Easy and quick to disassemble for thorough cleaning and service.
• Power cord lengths are 20’.
• Easy cord wrap on handle.
• Luggage handle and wheels for "H" series models.
• Inflatable adapter for “I” series model
• Durable and rugged housing.
• Weather proof Indoor/Outdoor use with P-815I model.
• 3 airflow positions for “H” series models (0°, 20° Kickstand, 90°).
• 4 airflow positions for other models (0°, 20°, 45°, 90°).
45°
* Except model P-815I

1. Prior to plugging the unit into the power source,
inspect completely for any shipping damage.
2. Adapter Assembly (Fig. A)
3. Plug the electrical cord into the power outlet.
4. Carefully place the Inflatable Blower unit on a stable,
flat dry surface.
5. The unit is capable of being used at 4 different
angles to direct air flow; unit with handle can be used
at 3 different angles.
6. Turn the switch to select desired speed, while making
sure unit operates normally.
7. All Inflatable Blowers in operation must be supervised
at all times.
Inflatable blowers
can be stacked
(up to 3) on
their sides for
storage.
NOTICE:
Stacking feature
is not secure for
transportation.
ADAPTER UNIT “I” FOR ALL
INFLATABLE MODELS
USE TO FOR INFLATABLE
FIG. A
XPOWER Inflatable Blowers are intended to move air and to dry floors, walls, furniture, etc. Durable and easy to
operate with an effective balance of static pressure and airflow, the units are suitable for a variety of applications.
INFLATABLE
BLOWER
STORAGE

1. To prevent electric shock, do not operate the unit in standing water. Never plug in or unplug the unit
with wet hands or while standing in water.
2. To avoid risk of injury, do not direct air flow at face or any part of body.
3. To reduce the risk of fire or electric shock, do not use the Inflatable Blower with any solid-state
speed control device.
4. Use only with GFCI protected receptacles. Please contact a qualified electrician for verification
and / or install GFCI receptacle if necessary.
5. Do not operate any Inflatable Blower with a damaged cord or plug. Discard the unit or return it to an
authorized service facility for examination and/or repair.
6. Unplug the Inflatable Blower from the power supply before moving, servicing or cleaning.
7. Do not run the power cord under carpeting. Do not cover the power cord with throw rugs, runners, or
similar coverings. Place the power cord away from traffic area to prevent tripping.
8. Do not allow children to play with or around an Inflatable Blower at any time.
9. Do not move or carry an Inflatable Blower while unit is operating.
10. All Inflatable Blowers in operation must be supervised at all times.

1) To keep the Inflatable Blower clean, use a damp cloths to wipe the surface of the housing; do not
immerse in liquid
2) When not in use, unplug and store the Inflatable Blower in a dry indoor place out of reach of children.
3) Always disconnect the Inflatable Blower from its source before performing any maintenance or cleaning.
Inflatable Blower
vibrates
Inflatable Blower
not running
Plug in the Inflatable Blower; check circuit breakerNo power input
Switch not turned on
Inflatable Blower fan wheel jammed
Intake or exhaust blocked
Accumulation of dirt on fan blades
Turn on switch
Remove material jamming fan wheel
Clean Inflatable Blower fan blades
Turn unit off and allow to cool,
then remove blockage

Model P-800I P-800HI P-830I P-830HI P-815I
Volt/Frequency 115V,60Hz 115V,60Hz 115V,60Hz 115V,60Hz 115V,60Hz
Power 3/4 HP 3/4 HP 1 HP 1 HP 1 HP
Amps 7.5 7.5 8.5 8.5 8
Unit Weights 24.2 Lbs. 27.2 Lbs. 25.2 Lbs. 28.2 Lbs. 26.1 Lbs.
Speeds Three Three Three Three One
Size (WxDxH) (Inch) 17.5" x 21" x 18.5" 17.5" x 21" x 18.5" 17.5" x 21" x 18.5" 17.5" x 21" x 18.5" 17.5" x 21" x 18.5"
Handle/Wheels Oponal Oponal Oponal Oponal
Filter Oponal Oponal Oponal Oponal Oponal Oponal
Cord Length 20 Ft. 20 Ft. 20 Ft. 20 Ft. 20 Ft.
Overheang Protecng
Thermally
Protecng
Thermally
Protecng
Thermally
Protecng
Thermally
Protecng
Thermally
Protecng
Rated Airflow (on high) 3200 3200 3600 3600 3600
Housing PP PP PP PP PP
Cerficaon ETL/CETL ETL/CETL ETL/CETL ETL/CETL

Call Service Department for a Return Merchandise Authorization (RMA) number and to
obtain return shipping instructions.
Provide original proof of purchase.
Use original non-damaged packaging or industrial certified packaging materials.
A.
B.
C.
This Warranty does not cover signs of misuse including, but not limited to, a unit that has been
dropped, subjected to water damage, tampering, improper voltage use or unauthorized
maintenance and repairs. The power cordd is not covered by the warranty.
XPOWER Warranty covers the unit from defects in materials and craftsmanship. The Warranty
covers normal use for a term of one year from the original date of purchase including parts, labor
and one way shipping. The XPOWER inflatable blower Housing and handle are covered for a term of
five years from the date of original purchase.
The end user will be responsible for shipping the unit (with the RMA number displayed on the
shipping label) to the XPOWER Service Department. Upon inspection, XPOWER will advise
you of the repairs needed and the cost (if applicable). XPOWER will provide repair or
replacement parts depending on warranty

800 Series Parts List
Capacitor
800-1
800-3
800-5
800-7
800-9
800-11
800-13
800-15
800-2
800-6
800-8
800-10
800-12
800-14
15
16
16
Filters800-16
Timer & Switch Plate
4-1
4-2
800-4-1/2 Switch Knob & Timer Knob

Luggage Handle & Wheels
XPOWER Inflatable Blower Models P-800HI and P-830HI come
with built-in extendable luggage handle and wheels for easy
transportation and mobility.
A set of Filters is available for the Air Mover models which will help prevent small debris and dust
from entering the unit. To clean the filters: Remove the filters from the unit and wash with warm
soapy water, rinse with clean water and let dry thoroughly before reinstalling.
Filters (Optional)
Installation:
Filters snaps into the air inlets.
Note:
The filter I is for Motor Side,
The filter II is for Fan Side
Filter Removal:
Pull the filters off the unit.
Note:
After cleaning make sure the
filters are dry before
reinstalling.
ADAPTER UNIT “I” FOR ALL
INFLATABLE MODELS
FIG. A