List of Tables
Table 1: Package contents for 1-series Development Kits ..................................................................... 1
Table 2: Ordering information for 1-series Development Kits ................................................................. 2
Table 3: Connections on external power header (J100 in Figure 7) ....................................................... 9
Table 4: Connections on Arduino-compatible header (P100, P101, P102 and P103 in Figure 7).......... 9
Table 5: Connections on UART communication extension sockets (P202 and P203 in Figure 7) ....... 10
Table 6: Switch positions to enable interfaces on Shield Board (SW200 in Figure 7) .......................... 10
Table 7: Connections on auxiliary sensor extension sockets (P200 and P201 in Figure 7) ................. 11
Table 8: Pin descriptions Shield Board ................................................................................................. 12
Table 9: System specification Shield Board .......................................................................................... 13
Table 10: Absolute maximum ratings Shield Board .............................................................................. 13
List of Figures
Figure 1: Exploded view of the MTi 1-series Shield board ...................................................................... 3
Figure 2: Start up screen for MT Software Suite installer ....................................................................... 5
Figure 3: Software components installation ............................................................................................ 5
Figure 4: Successful installation screen .................................................................................................. 6
Figure 5: MT Manager overview.............................................................................................................. 6
Figure 6: Output configuration dialog in MT Manager using an MTi-7-DK.............................................. 7
Figure 7: MTi 1-series Shield Board with connector designators............................................................ 8
Figure 8: Top view (left) and the bottom view (right) of the GNSS daughter card ................................ 11
Figure 9: MTi 1-series Shield Board package drawing (Top and Side view) ........................................ 14
