Xtralis VESDA E-Series User manual

VESDA
Student Workbook
Rev 8a •15SEP21

ii
Copyright
© 2021 Carrier Global Corporation.
All rights reserved.
This document may not be copied in whole or in part or otherwise
reproduced without prior written consent from Carrier Global
Corporation, except where specifically permitted under U.S. and
international copyright law.
Disclaimer
The information in this document is subject to change without notice.
Carrier Global Corporation assumes no responsibility for inaccuracies
or omissions and specifically disclaims any liabilities, losses, or risks,
personal or otherwise, incurred as a consequence, directly or indirectly,
of the use or application of any of the contents of this document.
This publication may contain examples of screen captures and reports
used in daily operations. Examples may include fictitious names of
individuals and companies. Any similarity to names and addresses of
actual businesses or persons is entirely coincidental.
Trademarks and patents
VESDA is a trademark of Xtralis.
Intended use
Use this product only for the purpose it was designed for; refer to the
data sheet and user documentation for details. For the latest product
information, contact your local supplier or visit us online at
https://www.corporate.carrier.com/.
DOCUMENT HISTORY
Date
Revision
Reason for change
20JAN21
.01
First internal class
18FEB21
1
First external customer facing class
12MAR21
2
Promoted additional activities to checklist items; added workflow
3
Skipped this version to make SW and Checklist revisions match
07APR21
4
Reorganization of checklist
26APR21
5
Changes to PPT01 to combine into one PPT; misc. checklist revisions
20MAY21
6
Miscellaneous checklist revisions
22JUN21
7
Minor checklist revisions based on student challenges
30JUL21
8
Changes to PPTs 03, 05; and 07 (slide 68) and checklist items 2 & 17
15SEP21
8a
PPT 02 reordered pages 55-56 to after Sector Scan Time; PPT 07
adjusted item lettering on checklist #15; PPT 08 redesigned by S.
Billock, Added Appendix G –VESDA Commissioning Manual

iii
Table of Contents
Section Title
1 Course Overview
2 Products
3 Installation
4 VESDAnet Connection
5 VSC Software Overview
6 VSC Software Configuration
7 ASPIRE Software
8 Commission a System
Appendix A VSC Software Installation
Appendix B ASPIRE Software Installation
Appendix C Course Checklist
Appendix D VESDA Pipe Network Design Guide
Appendix E VESDA Pipe Network Installation Guide
Appendix F VESDA Workflow Diagram
Appendix G VESDA Commissioning Manual

iv

Section 1
VESDA Student Workbook 1-1
VESDA
Course Overview
Learning outcomes
At the end of this course, you will be able to:
•Install, maintain, and troubleshoot VESDAASD (Aspirating Smoke Detectors)
and components
•Configure devices using VSC software
•Design VESDA pipe networks using ASPIRE software
•Commission a VESDA system

VESDA Course Overview
1-2 VESDA Student Workbook
Zoom Meeting
Attendee Controls
Audio controls
Mute/Unmute:
•Click the microphone to mute and unmute your microphone
•Push to talk by pressing and holding the spacebar
•Or use Alt + A to mute/unmute

VESDA Course Overview
VESDA Student Workbook 1-3
Audio controls
Audio Controls:
•Click the ^next to Mute/Unmute to change your microphone
and speakers
•Click Audio Settings… to access full audio settings
Audio controls
Adjust Audio Settings as desired

VESDA Course Overview
1-4 VESDA Student Workbook
Video controls
Start Video/Stop Video:
•Click the video camera to turn your video on and off
Video controls
Video Controls:
•Click the ^next to Start Video/Stop Video to change
your cameras (if using multiple cameras)
•Click Video Settings… to access full video settings

VESDA Course Overview
VESDA Student Workbook 1-5
Video controls
Adjust Video Settings as desired
Chat
Chat:
•Click Chat
•Type message into Chat box
•Click the dropdown arrow to select
your chat recipient

VESDA Course Overview
1-6 VESDA Student Workbook
Share Screen
Share Screen:
•Click Share Screen
•Locate the screen you
wish to share
•Click Share
Reactions
Reactions:
•Click Reactions
•Select an icon to share with your instructor
•You will use the Yes and No icons during the webinar