Xtralite NiteSafe Sensor ll User manual

Sensor ll
Model: XL20700
NiteSafeTM
Instruction Manual
Please read these instructions carefully before connecting
or using the appliance. Keep for future reference.

Important Information
When using electrical appliances, in order to reduce the risk of fire, electric shock,
and/or injury to persons, basic safety precautions should always be followed.
For your safety...
Read all instructions carefully, even if you are familiar with the appliance.
Do not use this appliance/charger if it appears to be damaged
Do not look directly into the light source or point it into the eyes of others. This can
lead to retinal damage.
Charge the light only with the charger provided
Do not throw the charger into fire and do not expose it to extreme heat. The charger
could explode or burst.
Do not attempt to alter or manipulate the charger in any way. Doing this increases
the exposure to danger significantly.
This appliance is not watertight and is unsuitable for use in damp
environments.
This is not a toy. Close attention is necessary when used near children.
Do not use with a damaged outlet.
Do not handle charger with wet hands.
Do not immerse the appliance or charger in water or any other liquid.
Do not attempt to use the charger with any other product.
Only plug the charger into a standard electrical outlet. Not to be used with
extension cords.
Do not operate with a damaged charger or if the appliance has malfunctioned or
been damaged in any manner.
Do not allow children to play with the packaging materials.

Nightlight Mode:
Place the torch into the charging cradle and switch the power on. The 5 LED front
facing nightlight will automatically be set to motion sensor mode and turn on
during darkness when movement is detected. (Default mode)
With the torch resting in the charging cradle, press the push button on the front
once to activate the Nightlight + Motion Sensor mode (the front LEDs will light up
to show this has activated). The 5 LED front nightlight will turn on automatically in
the hours of darkness, and it will become brighter when movement is detected.
To return the Sensor ll to motion sensor mode, simply press the front button once
again while the torch is resting in the cradle.
Sensor Delay Time: 20+/-5s
Sensor Distance: 2 to 3 metres
Power Failure Mode:
Super bright COB LED light automatically turns on during power failure.
Torch & Work Light Mode:
COB LED torch on top and 5-LED work light on the front.
4 mode press button to activate Top COB LEDs ON / Front 5-LEDs ON / Top COB
LED Flasher / Off
Induction charging rechargeable Li-ion 3.7v/500mAh battery
Save these instructions

COB LED Torch &
Emergency Flasher
5 LED for Nightlight
& Worklight
4 Mode Button
Motion Sensor
Charging Base
• Automatically turns on when the power goes out
• Torch simply slides in and out of charging base
• Induction charging technology
• Rechargeable Lithium-ion battery
• Modern design
• Lightweight and durable
• Torch with single COB LEDs - 130 Lumens (Torch Mode) 15 Lumens (Emergency
Mode)
• Front light with 5 super bright LEDs - Hi 40 Lumens / Low 0.3 Lumens
• Charge lasts up to 5 hours on Low and 2.5 hours on Hi
• 4-mode press button - Top COB LED / 5 front LEDs / Top COB LED flasher / Off
• 2 button Nightlight (In charging cradle) - Dusk to Dawn & Motion Sensor / Motion
Sensor
• The 5 LED nightlight will automatically turn on once movement is detected in the
dark room
• Sensor distance 2 to 3m
• 20 metre light spread
Sensor ll
Features of your NiteSafeTM
MUST BE CHARGED FOR 24 HOURS BEFORE INITIAL USE

One Year Limited Warranty
Made in China
For further product information visit
www.xtra-lite.com
Unit 3a Eden Business Park
Dunns Close
Nuneaton
Warwickshire
CV11 4NE
t: 02476 586 845
e: [e-mail]
xtralite is a trading name of Trinity Xtras Ltd a Company
registered in England No 4325172