Xtralite omni XL20717 User manual

Small LED Tap Light
Model: XL20717
Instruction Manual
Please read these instructions carefully before connecting
or using the appliance. Keep for future reference.
One Year Limited Warranty
Made in China
For further product information visit
www.xtra-lite.com
Important Information
When using electrical appliances, in order to
reduce the risk of fire, electric shock, and/or injury
to persons, basic safety precautions should always
be followed.
For your safety...
Read all instructions carefully, even if you are
familiar with the appliance.
Do not use this appliance if it appears to be
damaged.
Do not look directly into the light source or point it
into the eyes of others. This can lead to retinal
damage.
This appliance is not watertight and is unsuitable
for use in damp environments.
This is not a toy. Close attention is necessary when
used near children.
Do not immerse the appliance in water or any
other liquid.
Do not allow children to play with the packaging
materials.
CAUTION!
1. Position the batteries in the correct position and
do not install batteries of different types, charge
levels or capacity together.
2. Keep batteries away from children! Dispose of
batteries correctly.
3. DO NOT dispose of in general waste or fire.
Unit 3a Eden Business Park
Dunns Close
Nuneaton
Warwickshire
CV11 4NE
t: 02476 586 845
e: [email protected]
xtralite is a trading name of Trinity Xtras Ltd a Company
registered in England No 4325172
Damage-Free Mounting
WITH
STRI PS

1
3
1
4
5
EASY INSTALLATION:
SCREW FIXING:
Remove the cover by rotating
counter-clockwise. Ensure
surface is clean from dust and
grease (do not use household
cleaners).
Tap to turn the light on. Turn counter-clockwise to
release the light from the
cover.
Mark the centre mounting
hole in the cover and drive
the screw into the mounting
surface.
To attach the light, align the
notches and turn the light
clockwise.
Remove the red liner and
insert the tab into the slot.
Press the strip onto the back
of the cover.
Remove the black liner of the
adhesive strip and then press
and hold the base onto the
surface for 30 seconds.
Never pull the strip away
from the surface, always pull
along the surface.
To attach the light, align the
notches and turn the light
clockwise.
Stretch the strip slowly and
straight against the surface
not away from it to release.
3
2
21
Dimensions: 75mm x 25mm
Weight: 40g
LED quantity: 3
Lamp wattage: 0.45W
Lamp CCT: 4000K
Lumens: 40
Lamp life: 30000hrs
Battery type: (3) AAA batteries
Power Switch: Tap ON/OFF
Indoor use only
EASY REMOVAL:
2