Xtreme Power 75137 Original instruction manual

OWNER’S MANUAL AND SAFETY INSTRUCTIONS
A-FRAME ABOVE GROUND POOL LADDER
ITEM # 75137
SAVE THIS MANUAL. KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,
OPERATION, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S
SERIAL NUMBER ON THE BACK OF THE MANUAL, OR THE MONTH AND YEAR OF PURCHASE IF
PRODUCT HAS NO SERIAL NUMBER
FOR QUESTIONS, PLEASE CALL CUSTOMER SERVICE: 909.628.0880

SAFETY WARNINGS
Read all safety warnings and instructions. Failure to follow the warnings and instructions
may result in injury and/or property damage. Save all warnings and instructions for
future reference.
The warning and safety instructions in this manual are not meant to cover all possible conditions and
situations that may occur. Common sense, caution and care must be exercised when operating or
cleaning tools and equipment. Always contact your dealer, distributor, service agent or manufacturer
about problems or conditions you do not understand before operating the product.
1
Locate the ladder on a solid, at surface only.
One person should be permitted on the ladder at a time
The ladder must be installed and used per manufacturers instructions only. Do not modify the ladder.
DANGER: Do not jump or dive from the ladder.
DO NOT let children play on or near the ladder.
Exceeding the maximum weight restriction of 250lbs may cause the ladder to fall.
When the ladder is not in use, be sure to lock up the outer treads.
In order to avoid injury during the installation and handling of heavy objects, it is recommended to
have two people carry the ladder at a time.
To prevent entrapment or drowning, DO NOT swim through or behind the ladder.
DO NOT install the ladder at a suction point.
The distance is adjustable from 48 to 54 inches.

SAFETY WARNINGS PARTS INFORMATION
1 2
Required for Installation:

SPECIFICATIONS / TROUBLESHOOTING
3
ASSEMBLY
ASSEMBLY
4

SPECIFICATIONS / TROUBLESHOOTING
ASSEMBLY ASSEMBLY
4

SPECIFICATIONS / TROUBLESHOOTING
5
ASSEMBLY
ASSEMBLY
6

ASSEMBLY
6

DISCLAIMER
7
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE
OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED
TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR
EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN
BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES
ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT
PARTS THERETO.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only and are not available
individually as replacement parts.
MADE IN CHINA