XtremepowerUS 65057 Original instruction manual

OWNER’S MANUAL AND SAFETY INSTRUCTIONS
AIR OPERATED TIRE SPREADER
ITEM # 65057
SAVE THIS MANUAL. KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,
OPERATION, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S
SERIAL NUMBER ON THE BACK OF THE MANUAL, OR THE MONTH AND YEAR OF PURCHASE IF
PRODUCT HAS NO SERIAL NUMBER
FOR QUESTIONS, PLEASE CALL CUSTOMER SERVICE: 909.628.0880

SAFETY WARNINGS
Read all safety warnings and instructions. Failure to follow the warnings and
instructions may result in injury and/or property damage. Save all warnings and
instructions for future reference.
The warning and safety instructions in this manual are not meant to cover all possible conditions and
situations that may occur. Common sense, caution and care must be exercised when operating or
cleaning tools and equipment. Always contact your dealer, distributor, service agent or manufacturer
about problems or conditions you do not understand before operating the product.
SAVE THESE WARNINGS.
1
• Do not use this product for anything other than it is intended.
• Make sure to keep the machine clean at all times. Wipe it down after every use.
• Keep children and unauthorized persons away from the work area.
• Wear ANSI approved safety goggles when operating the spreader.
• Do not use the spreader if any part of it is damaged, worn or distorted.
• Keep the work area clean and well lit. Cluttered and dark spaces invite accidents.
• DO NOT allow untrained persons to operate the spreader.
• DO NOT make any modications to the spreader.
• DO NOT expose the spreader to water.
•. Ensure that you read, understand and apply the safety instructions and warnings before use. Failure to heed
these instructions may result in property damage and/or personal injury.

SAFETY WARNINGS INFORMATION
SAVE THESE WARNINGS.
1 2
The machine adopts foot valve pneumatic device, equipped with working lamp, oil-water
separator and tool plate. It has the characteristics of small volume, convenient operation and
exibility, and is suitable for tire expansion when repairing various automobile tires.
1. Before use, please clean the sundries on the machine and check whether all parts are
normal. Connect the air source to check whether there is air leakage. The working pressure is
within 0.6mp ± 0.1.
2. When expanding the tire, put the left and right claws into the two sides of the inner cavity of
the tire, and use the open gear adjustment to adjust to the appropriate position (not loose or
tight is the most ideal), and then step on the right foot pedal (↑ air intake direction), the main
shaft of the cylinder starts to rise, the left and right claws gradually expand, open the tire support
to the appropriate position required by the operator, and quickly leave the foot from the tread
plate. Repair can be carried out after conrming that it has stopped stably.
3. After repairing, step on the left pedal (↓ falling direction), return the cylinder and claw to the
original position, and then remove the tire.
Tire Width: 5.7” - 10.8”
Tire Diameter: 11 “- 24”
Max Tire Width: 15”
Input Voltage: 220 V
Operating Pressure: 0.6MPa
TECHNICAL PARAMETERS

DISCLAIMER
3
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE
OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED
TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR
EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN
BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES
ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT
PARTS THERETO.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only and are not available
individually as replacement parts.
MADE IN CHINA