XVST MAGIC 04 User manual

Digital Video Recorder
User
’
s Manual
User s
Manual
XVST MAGIC 04/08/08P/16P/16M
XVST NMS 04/08/16
1
XVST
NMS
04/08/16

Thank you for using our product.
1. This is user's manual for H.264 HD DVR (Digital Video Recorder).
2. This manual contains product specification and introduction, installation guide,
operating guide and other necessary matters for easy understanding. Users should
read this user's manual carefully for proper use.
3. Contents in this manual may be changed according to the specification change and
f t i t ith t tifi ti
f
ea
t
ure
i
mprovemen
t
w
ith
ou
t
any no
tifi
ca
ti
on.
4. This user's manual shall never be copied without prior agreement and violating this
may be a reason for legal punishment on piracy.
5. If there is any incorrect or insufficient content in this user's manual, notify it to
Customer Support Center.
2

CONTENTS
Contents
CH 1. Product Introduction`
1-1. Product Contents 5
1-2. Specifications 7
1-3. Product Characteristics 11
1
-
4
. Name of Each Part
13
1
4
.
Name
of
Each
Part
13
CH 2. Installation Guide and Cautions
2-1. Cautions 19
2-2. Product Installation 22
2-2-1. Power Connection 22
2-2-2. Connectin
g
External Device 22
g
CH 3. How to Use
3-1. General Usage Information 26
3-2. Live Mode 27
3-2-1. Live mode control 27
f
3-2-2. Live mode
f
eature 29
3-3. Search Mode 35
3-3-1. Search selection type 35
3-3-2. Play Mode 39
3-4. Setup Mode 40
3
4
1
Display
40
3
-
4
-
1
.
Display
40
3-4-2. Record 45
3-4-3. Device 50
3-4-4. Network 65
3-4-5. System 72
3-5. Firmware Upgrade 78
3

CONTENTS
Contents
Trouble Shooting 80
Warranty 81
Appendix A
CMS(Client Management Software)
82
Appendix
A
CMS(Client
Management
Software)
82
Appendix B Catcheye for Android mobile 120
Appendix C Catcheye for iPhone 126
Appendix D How to Connect xbox1 132
4

CH1. Product Introduction
CH 1 Product Introduction
1-1. Product Contents(MAGIC 04/08, NMS 04/08)
After removing packing materials of this product, check whether all following
contents are included.
Main Body (DVR):
This converts the analog video and audio signal to
the digital signal and saves on HDD.
Adapter:
Thi 12V d t li t th d t
Thi
s
12V
a
d
ap
t
er supp
li
es power
t
o
th
e pro
d
uc
t
.
Power Cable:
This connect the adapter and the power source.
MOUSE:
This is an controller for convenience.
Program CD:
Thi
s
co
ntain
s
th
e
Use
r’
s
man
u
al an
d
C
li
e
nt
sco s eUse s u dC e
Program for DVR.
Remote Controller:
This is an IR remote controller for convenience.
5
Battery:
These are 2(two) battery for the remote controller.

1-1. Product Contents(MAGIC 08P/16P/16M, NMS 16)
CH 1 Product Introduction
After removing packing materials of this product, check whether all following
contents are included.
Main Body (DVR):
This converts the analog video and audio signal to
the digital signal and saves on HDD.
Adapter:
Thi 12V d t li t th d t
Thi
s
12V
a
d
ap
t
er supp
li
es power
t
o
th
e pro
d
uc
t
.
Power Cable:
This connect the adapter and the power source.
MOUSE:
This is an controller for convenience.
Program CD:
Thi
s
co
ntain
s
th
e
Use
r’
s
man
u
al an
d
C
li
e
nt
sco s eUse s u dC e
Program for DVR.
Remote Controller:
This is an IR remote controller for convenience.
6
Battery:
These are 2(two) battery for the remote controller.

1-2. Specifications(MAGIC)
CH 1 Product Introduction
Model
MAGIC Series
MAGIC 4 MAGIC 8 MAGIC 8P MAGIC 16P MAGIC 16M
Compact case 19” rack type
Camera in
p
ut 4 BNC 8 BNC 8 BNC 16 BNC 16 BNC
Video
Individual HD/Analog sel
ectable All Hybrid(Patent)
Available source 720p25,30,50,60/1080p25,30,50,60/1080i50,60/Composite/960H/Mixed
Output 1 HDMI+1 VGA (simultaneously) / 1 Programmable SPOT with OSD
Audio Audio input 4 RCA 8 RCA 16 RCA
Output
1RCA
Output
1
RCA
Sensor In 4 (NC/NO) 8 (NC/NO) 16(NC/NO)
Alarm out 1 relay 6 TTL, 2 relay 14 TTL, 2 relay
Operating System Embedded Linux OS
Display
Speed Real Time
Resolution (Pixel) 1280X1024, 1280X720, 1920X1080
Split screen 1,4 1,4,6,8,9 1,4,6,8,9 1,4,6,8,9,13,16
Recording
CODEC H.264 / JPEG for 3G, Dual CODEC
Resolution (Pixel) 720p, 1080p,1080i, 960H, 720H, Mixed
Picture quality 4 steps (Super, High, Medium, Low)
Speed NTSC area
PAL area
120fps@1080p
100fps@1080p
240fps@1080p
200fps@1080p
240fps@1080p
200fps@1080p
480fps@1080p
400fps@1080p
480fps@1080p
400fps@1080p
Playback
Display 1,4 1,4,8 1,4,8 1,4,6,8,9,13,16
Search mode Calendar, Event ,POS , Panorama, Thumbnail
Speed NTSC
PAL
60fps@1080p
100fps@1080p
120fps@1080p
200fps@1080p
120fps@1080p
200fps@1080p
120fps@1080p
200fps@1080p
480fps@1080p
400fps@1080p
Fast/Slow speed Normal, REW & FF [recorded speed x2, x4, x8, x16,x32,x64,x1/2,x1/4], Frame to
frame Pause
7
frame
,
Pause

1-2. Specifications(MAGIC,continued)
CH 1 Product Introduction
Model
MAGIC Series
MAGIC 4 MAGIC 8 MAGIC 8P MAGIC 16P MAGIC 16M
Compact case 19” rack type
Network Interface Gigabit Ethernet
Network
Speed 15fps@1080p 60fps@1080p 120fps@1080p
Protocol TCP/IP, HTTP, DHCP
Application Windows 2000 / XP / Vista / 7 / 8 (PC Client system& IE)/MAC
Web Browser Internet Explorer, Safari, FireFox, Chrome
Smart phone App CatchEye : Android, iPhone for live and search
Backup Interface USB 2.0 X 2 USB 2.0 X 3
Backup device External HDD, CD&DVD-RW, Network, Thumb Drive
2 SATA(No capacity limit ;
4SATA+1eSATA(
upto
12 bays No c
The number of HDD
2
SATA(No
capacity
limit
;
4TB of more)
4
SATA
+
1
eSATA(
upto
12
bays
,
No
c
apacity limit ; 4TB or more)
•Full GUI with alpha blending
•Individual setting of resolution, frame rates and picture quality
•Instant Replay
•Digital Zoom
•Mouse Control
•Weekly scheduler with holiday by 10 minutes setting
•Covert, Disable and Private function of cameras
Function
•Motion Detection with 352 area setting
•Relay alarm output
•PTZ control by RS-485
•Daylight Saving Time and Network Time Setting
•Multi User Authority up to 8 Users
•Deinterlacer upon live and playback
•22 languages with full graphic
•Individual Network port setting
Auto Deletion
•
Auto
Deletion
•Import and Export the configuration
•Mirroring
•POS Interface
•Dual CODEC engine for independent video transmission
•Interactive setup via network
Others
Power Consumption 60W 150W
Operating Temperature 5 ~40℃(41~104F)
Relative Humidity
Maximum 80% non
-
condensing
8
Relative
Humidity
Maximum
80%
non
condensing
Dimension 340(W)×250(D)×60(H) mm 430(W)×420(D)×88(H)

1-2. Specifications(NMS)
CH 1 Product Introduction
Model
NMS
NMS 4 NMS 8 NMS 16R
Compact case 19” rack type
Camera in
p
ut 4 BNC 8 BNC 16 BNC
Video
Individual HD/Analog sel
ectable HD-SDI only
Available source 720p25,30,50,60/1080p25,30,50,60/1080i50,60/960H/Mixed
Output 1 HDMI+1 VGA (simultaneously) / 1 Programmable SPOT with OSD
Audio Audio input 4 RCA 16 RCA
Output
1RCA
Output
1
RCA
Sensor In 4 (NC/NO) 16(NC/NO)
Alarm out 1 relay 14 TTL, 2 relay
Operating System Embedded Linux OS
Display
Speed Real Time
Resolution (Pixel) 1280X1024, 1280X720, 1920X1080
Split screen 1,4 1,4,6,8,9 1,4,6,8,9,13,16
Recording
CODEC H.264 / JPEG for 3G, Dual CODEC
Resolution (Pixel) 720p, 1080p,1080i, Mixed
Picture quality 4 steps (Super, High, Medium, Low)
Speed NTSC area
PAL area
120fps@1080p
100fps@1080p
240fps@1080p
200fps@1080p
480fps@1080p
400fps@1080p
Playback
Display 1,4 1,4,8 1,4,6,8,9,13,16
Search mode Calendar, Event ,POS , Panorama, Thumbnail
Speed NTSC
PAL
60fps@1080p
100fps@1080p
120fps@1080p
200fps@1080p
120fps@1080p
200fps@1080p
Fast/Slow speed Normal, REW & FF [recorded speed x2, x4, x8, x16,x32,x64,x1/2,x1/4], Frame to
frame Pause
9
frame
,
Pause

1-2. Specifications(NMS, continued)
CH 1 Product Introduction
Model
NMS
NMS 4 NMS 8 NMS 16R
Compact case 19” rack type
Network Interface Gigabit Ethernet
Network
Speed 15fps@1080p 60fps@1080p 120fps@1080p
Protocol TCP/IP, HTTP, DHCP
Application Windows 2000 / XP / Vista / 7 / 8 (PC Client system& IE)/MAC
Web Browser Internet Explorer, Safari, FireFox, Chrome
Smart phone App CatchEye : Android, iPhone for live and search
Backup Interface USB 2.0 X 2 USB 2.0 X 3
Backup device External HDD, CD&DVD-RW, Network, Thumb Drive
4SATA+1
eSATA
The number of HDD 2 SATA(No capacity limit ; 4TB of more)
4
SATA
+
1
eSATA
(upto 12 bays, No cap
acity limit ; 4TB or mo
re)
•Full GUI with alpha blending
•Individual setting of resolution, frame rates and picture quality
•Instant Replay
•Digital Zoom
•Mouse Control
Function
•Weekly scheduler with holiday by 10 minutes setting
•Covert, Disable and Private function of cameras
•Motion Detection with 352 area setting
•Relay alarm output
•PTZ control by RS-485
•Daylight Saving Time and Network Time Setting
•Multi User Authority up to 8 Users
•Deinterlacer upon live and playback
•22
languages with full graphic
•22
languages
with
full
graphic
•Individual Network port setting
•Auto Deletion
•Import and Export the configuration
•Mirroring
•POS Interface
•Dual CODEC engine for independent video transmission
•Interactive setup via network
Power Consum
p
tion 60W 150W
10
Others
p
Operating Temperature 5 ~40℃(41~104F)
Relative Humidity Maximum 80% non-condensing
Dimension 340(W)×250(D)×60(H) mm 430(W)×420(D)×88(H)

1-3. Product Characteristics
1
)
Full HD real time and All H
y
brid
(
H
y
brid is MAGIC series onl
y)
CH 1 Product Introduction
)
y(y y)
This DVR can record HD and Full HD video with extreme quality. Also it displays
real HD(1920X1080) resolution, and therefore it provides the most clear image
quality and the best security level. Furthermore, MAGIC series can mix any input
such as analog, 960H and HD-SDI. All video input is detected automatically. (Patent)
2) High reliability
With Embedded hardware and software design, this maintains higher product
r
eliability
r
eliability
.
3) Simple usage
This allows users to use it conveniently by placing control buttons similar to existing
ones on VCR, and users can easily learn the usage.
4) Pentaplex System
Pentaplex System allows live, recording, backup, networking and playback
simultaneously
simultaneously
.
5) Selectable recording setup
For recording methods, users can select the frame rate, resolution and video quality
individually in order to be appropriate for user's environment.
6) Remote monitoring
With using exclusive line or Internet network, you can search or monitor recorded
im
a
ges remotely by installing exclusive client program on
Windows PC or Mac
im
a
ges
remotely
by
installing
exclusive
client
program
on
Windows
PC
or
Mac
.
7) Backup
You can backup with a versitile external USB devices.
8) Audio recording
You can record 4 sound inputs simultaneously. Moreover, you can listen to the
sound in search and live monitoring and play mode.
9) Various recording methods
This provides convenient use with manual recording, recording by dates and days,
hourly schedule recording, sensor and motion detection event recording and others to
enable unmanned monitoring.
10) Various total monitoring features
You can cover any security scenario through various sensor inputs and contact output
l
11
contro
l
.

11) Display information in easy-to-understand information method
Thi h d i f b di l i i f ti (d t ti di
CH 1 Product Introduction
Thi
s en
h
ance
d
conven
i
ence o
f
user
b
y
di
sp
l
ay
i
ng
i
n
f
orma
ti
on
(d
a
t
e,
ti
me, recor
di
ng
method, recording frame number, HDD capacity and others) in monitoring, recording
and playing mode in easy-to-understand way.
12) P/T/Z control
By built in RS485, various P/T/Z cameras can be used.
13) Dual CODEC for video transmission
d f (b d ) dl f h l l di d i i
DVR can sen
d
120
f
ps
(b
ase
d
on CIF
)
regar
dl
ess o
f
t
h
e
l
oca
l
recor
di
ng an
d
v
i
ew
i
ng
setup regardless with recording setup.
14) Web browser support
You can monitor and playback the video and control the PTZ camera by internet
explorer.
15) Built in S.M.A.R.T.
You can automatically check the health of the hard disk drives.
16) Language pack
Basically DVR has multiple language set, furthermore you can choose the language
set if you want.
17) Mirroring by internal HDD
If you install two HDDs, you can use the second HDD for backup for maximum
fault tolerance.
18) Spot monitoring
Spot out can be enable to monitor sequentially in other place.
19) Touch LED Switch
You can operate with touch LED switch in front panel.
20) Text inserter(POS Interface)
You can operate with the POS and ATM.
21) HD Spot out
You can use one of VGA and HDMI to the HD spot.
12

1-4. Name of Each Part
CH 1 Product Introduction
[Front Panel]
<MAGIC 04/08, NMS 04/08>
3. STATUS RAMPS
1. IR WINDOW
2. USB
1. IR Window : the window for remote controller
2. USB ports : These USB ports are for mouse and USB devices. You should
connect correctly the USB devices and mouse as picture directed.
3. Status lamps
POWER : Blue color back light. Power indicator.
RECORD : Red. Indicate the recording.
NETWORK G Li i h
k
NETWORK
:
G
reen.
Li
t on connect
i
ng t
h
e networ
k
13

[Front Panel]
CH 1 Product Introduction
<MAGIC 08P/16P/16M, NMS 16>
5. IR Window
1. Playback Buttons
4. Backup Device 6. Jog Shuttle
2. Enter & Arrow Keys
3. Number Buttons
1. Playback buttons : It will be used on playback. If you press these buttons in live
m
ode,
i
t
w
ill
be
auto
m
at
i
ca
ll
y
c
h
a
n
ged
to
t
h
e
In
sta
n
t
Pl
ay
m
ode.
‘
Stop
’
butto
n
8. USB
7. Status Ramps 9. Function Keys
ode, t w be auto at ca y c a ged to t e sta t ay ode. Stop butto
changes from the play mode to the live mode.
2. ARROW, ENTER : This button is used to change settings for the product in
MENU Mode or used in Search Mode. Also right arrow
button is used for ‘Hold’ while Jog Shuttle action.
3. Number buttons : If you press this button, it will be changed to full screen in live
viewing or playback If you want to go to 20ch, push the 10+ button twice. (※In
menu and password setting, it is automatically converted to number buttons)
4. Backup device
: You can use the versatile backup devices such as CD
-
RW and
4.
Backup
device
:
You
can
use
the
versatile
backup
devices
such
as
CD
RW
and
DVD-RW.
5. IR Window : the window for remote controller
6. Jog Shuttle : You can use this wheel for fast retrieving and playback back and pro.
If you hold the shuttle, push the right arrow button while grabbing the
shuttle.
7. Status lamps
POWER : Blue color back light. Power indicator.
RECORD : Red Indicate the recording
RECORD
:
Red
.
Indicate
the
recording
.
NETWORK : Green. Lit on connecting the network
ALARM : Red. It will be lit on when the events happen
8. USB ports : These USB ports are for mouse and USB devices.
9. Function keys
1) MENU : It will move to the setup screen from the live mode.
2) SEARCH : It will change to the playback mode from the live mode.
3) BACKUP : It will move to the backup screen from the live or play mode
14
3)
BACKUP
:
It
will
move
to
the
backup
screen
from
the
live
or
play
mode
.
4) DISPLAY : It will change the screen splitting sequentially from 1 to 20. It can be
adapted both live and play mode.
5) SWITCHING : It will change to switching mode except 20 splitting.

CH 1 Product Introduction
6) ZOOM : It will go to the digital zoom directly.
7) PTZ : It will change to the pan, tilt and zoom control mode from the live mode.
8) LOCK/EXIT : If you want move to the upper menu or exit without saving, press
[
Rear Panel
]
8)
LOCK/EXIT
:
If
you
want
move
to
the
upper
menu
or
exit
without
saving,
press
this button. On playback, it will disappear the search list for the better
viewing. On live viewing, it performs the system lock.
9) PANIC : This button is used in emergency status. If you push this button,
the DVR starts to record with maximum speed regardless of setting value.
※ For more details, refer to [CH 3. How to Use]
[
]
<MAGIC 04, NMS 04>
11.AUDIO
OUT 8.RELAY
7.RS485
10. AUDIO IN 9.SENSOR IN
1. Cooling Fan
2. Video In: This receives ima
g
es from SDI cameras
(
04
)
or an
y
camera
(
08
)
.
1.FAN 2.VIDEO IN
3. LAN
4.SPOT
5. VGA
12.HDMI
6. POWER
13.Xbox
Extender
(option)
g
() y ()
3. LAN Port: This is the Gigabit Ethernet LAN cable connection terminal.
4. SPOT Out : To CRT 4:3 monitor for spot video.
5. VGA port: video output for analog RGB display
6. DC Power : DC12V 4.16A or up
7. RS485 port : For control the pan and tile cameras. Make sure that the polarity.
8. Relay out : This terminal blocks connect external electric devices to the product
( Warning Lamp and others)
(
Warning
Lamp
and
others)
.
9. Sensor In : This terminals can be connected to external sensors.
10. Audio In: RCA audio in terminals. You can record four channels at the same
time.
11. Audio Out: RCA audio out terminal.
12. HDMI : HDMI output for HD monitor
13. VGA Extender (option) : Connect EXTEND FTP cable to Receiver
15
※ For more details, refer to [CH 2. Installation Method and Cautions].

CH 1 Product Introduction
[Rear Panel]
<MAGIC 08, NMS 08>
11.AUDIO
OUT 8.RELAY
7.RS485
10. AUDIO IN 9.SENSOR IN
1.FAN 2.VIDEO IN
3. LAN
4.SPOT
5. VGA
12.HDMI
6. POWER
13.Xbox
Extender
(option)
1. Cooling Fan
2. Video In: This receives images from analog/960H/SDI cameras.
3. LAN Port: This is the Gigabit Ethernet LAN cable connection terminal.
4. SPOT Out : To CRT 4:3 monitor for spot video.
5. VGA port: video output for analog RGB display
6. DC Power : DC12V 4.16A or up
7. RS485 port : For control the pan and tile cameras. Make sure that the polarity.
8. Relay out : This terminal blocks connect external electric devices to the product
( Warning Lamp and others).
9. Sensor In : This terminals can be connected to external sensors.
10. Audio In: RCA audio in terminals. You can record four channels at the same
time.
11. Audio Out: RCA audio out terminal.
12. HDMI : HDMI output for HD monitor
13. VGA Extender (option) : Connect EXTEND FTP cable to Receiver
※
For more details refer to [CH 2 Installation Method and Ca tions]
16
※
For
more
details
,
refer
to
[CH
2
.
Installation
Method
and
Ca
u
tions]
.

CH 1 Product Introduction
[Rear Panel]
<MAGIC 08P>
<MAGIC
08P>
14.Spot Out
4.Adapter
2.Audio Out
12. Sensor, Alarm, RS485
7. LAN 3. Switch
13. Extend
5. RS232C
1.Video In
6. e-SATA
11. VGA
10.HD Out
9. Audio In
8. USB
1. Video In : This receives images from cameras and sends them to monitors.
Loop Out : This sends the images from the cameras to the other devices.
2. Audio Out : RCA audio out terminal.
3. Power Switch
4. Adapter : Connect DC12V only.
5. RS232C
: This is Serial communication(RS232C) cable connection terminal
5.
RS232C
:
This
is
Serial
communication(RS232C)
cable
connection
terminal
.
6. e-SATA
7. LAN Port: This is LAN cable connection terminal.
8. USB ports : This USB port is for mouse and USB devices.
9. Audio In: RCA audio in terminals. You can record 16 channels at the same
time.
10. HD Out : Real HD(1920X1080) output for high resolution monitor
11 VGA port
: video output for VGA display
11
.
VGA
port
:
video
output
for
VGA
display
12. Sensor, Alarm, RS485 : For external sensor and external electric devices to
these terminal block. There are 16 inputs, 2 relay output and 14 TTL output.
For control the pan and tile cameras. Make sure that the polarity.
13. VGA Extend (option) : Connect EXTEND FTP cable to Receiver
14. Spot Out : For spot CRT monitor, composite signal comes out.
17
※ For more details, refer to [CH 2. Installation Method and Cautions].

CH 1 Product Introduction
[Rear Panel]
<MAGIC 16P/16M NMS 16>
<MAGIC
16P/16M
,
NMS
16>
12. Sensor, Alarm, RS485
7. LAN 3. Switch
14.Spot Out
13. Extend
5. RS232C 4.Adapter
2.Audio Out
1.Video In 6. e-SATA
11. VGA
10.HD Out
9. Audio In
8. USB
1. Video In : This receives images from cameras and sends them to monitors.
Loop Out : This sends the images from the cameras to the other devices.
2. Audio Out : RCA audio out terminal.
3. Power Switch
4. Adapter : Connect DC12V only.
5. RS232C
: This is Serial communication(RS232C) cable connection terminal
5.
RS232C
:
This
is
Serial
communication(RS232C)
cable
connection
terminal
.
6. e-SATA
7. LAN Port: This is LAN cable connection terminal.
8. USB ports : This USB port is for mouse and USB devices.
9. Audio In: RCA audio in terminals. You can record 16 channels at the same
time.
10. HD Out : Real HD(1920X1080) output for high resolution monitor
11 VGA port
: video output for VGA display
11
.
VGA
port
:
video
output
for
VGA
display
12. Sensor, Alarm, RS485 : For external sensor and external electric devices to
these terminal block. There are 16 inputs, 2 relay output and 14 TTL output.
For control the pan and tile cameras. Make sure that the polarity.
13. VGA Extend (option) : Connect EXTEND FTP cable to Receiver
14. Spot Out : For spot CRT monitor, composite signal comes out.
18
※ For more details, refer to [CH 2. Installation Method and Cautions].

CH2. Installation Method and Cautions
CH 2 Installation Method and Cautions
2-1. Cautions
WARNING
Risk of electric shock.
Do not open the cover of the product.
Servicing of this product by unauthorized personnel is
prohibited and will result in a void of warranty.
- Avoid installing the product where there are direct rays or it is hot by locating near
from heat generator. (May cause fire)
In order to ensure the most stable
conditions for power, the use of a UPS (Uninterrupted
Power Supply) is recommended.
- Do not put vase, flowerpot, cup, cosmetics, drug, and anything the contain water on
product. (May cause fire or electric shock, and it may injure people by falling)
- Do not insert or drop any metal object (coin, hair pin) or flammable object (match,
paper) into air hole. (May cause fire or electric shock)
- Do not put any heavy object on it. (May injure people by being fell or destroyed.)
- Put power plug surely not to be moved. (If not, this may cause fire.)
- Unplug power plug and antenna when there are thunders and lightening. (May
cause fire.)
- For cleaning the product, wipe surface with dry towel. Using chemical agent or
cleaner may change the color and unpeel paint. Do not put several plugs at same
time. (May cause electric shock.) If there is smoke or strange smell, stop operation. In
this case, turn the power off and unplug it, and then contact our service center. (If you
keep using it, this may cause fire or electric shock.)
- Do not unplug by pulling cord. (If cord is damaged, it may cause fire or electric
shock )
19
shock
.
)
- Do not plug or unplug with wet hands. (May cause electric shock.)

- Keep the power cord untwisted. (May cause fire or electric shock.)
- Use proper adapter. (Using too much electric power may cause fire or electric shock.)
CH 2 Installation Method and Cautions
- Do not install it at where exposed to rain and wind and water drop. (May cause fire,
electric shock and transformation.)
- Keep away from fire. (May cause fire.)
-Do not disassemble or remodel on your own. (May cause malfunction or electric
shock.)
- Do not put next to flammable materials like flammable spray. (May cause fire.)
- Do not install it at a place with too much dirt. (May cause fire.)
- Do not install it on unstable places like shaking table and inclined place or shaking
place. (May injure users by falling down or being upside down.)
- Do not put an heavy object on power cord or avoid it from being pressed by the
device. (May cause fire or electric shock.)
- In case of using extension cord, do not use several devices at same time. (May cause
fire with abnormal heating of extension.)
- When there are dirt on power plug pin or power outlet, clean it nicely. (May cause
fire.)
-Do not damage on power cord or plug, and bend or twist or pull too much, and put it
between other objects or heat. If power outlet insertion part is not tight, do not use it.
(May cause fire or electric shock.)
-Do not drop or give a shock to the product. (May injure people or cause malfunction.)
-
Do not touch power adaptor or signal controller. (May cause electric shock.)
Do
not
touch
power
adaptor
or
signal
controller.
(May
cause
electric
shock.)
- Do not put any object too close to block cooling fan. (May cause fire.)
- In case of exchanging batteries with improper type, there might be danger of
explosion.
- For used batteries, throw away separately from other garbage.
- When you take out batteries, avoid children from eating them by mistake. Keep them
away from children. (If a child ate them, contact a doctor right away.)
20