Xylem YSI ProSwap Logger Power Pack User manual

Quick Start Guide
Item #610214
Battery Compartment for
6 AA alkaline batteries
Twist-lock Cable
Connector
Battery Level
Indicator
Magnetic Switch to
check Battery Level
YSI.com
This is a reference guide for setting up the ProSwap Logger Power Pack. The Power
Pack provides power to the ProSwap Logger using six AA alkaline batteries.
AAAAAA
AAAA
AA

Setting Up
Item# 610214 Dwg# 610214
March 2021 Rev B
1725 Brannum Lane
Yellow Springs, OH 45387
[phone], [phone]
[email protected]
YSI.com
The Power Pack cover utilizes
captive screws. Use a Phillips head
screwdriver to loosen the 4 screws
and remove the cover to access
the battery compartment.
12
34
5
Install 6 AA alkaline batteries in the
battery compartment.
Connect the ProSwap Logger
cable to the MS-8 connector.
Use the magnet tool to activate
the Battery Level Indicator and
check the battery level.
Reinstall the Power Pack cover.
• 100% charge
• 75% charge
• 50% charge
• 25% charge
• 0% charge
—
—
—
—
—
4 Solid LED’s
3 Solid LED’s
2 Solid LED’s
1 Solid LED
No Solid LED’s
(4 Flash)
BATTERY LEVEL
6x 1.5V AA
AAAAAA
AAAA
AA
AAAAAA
AAAA
AA
AAAAAA
AAAA
AA
AAAAAA
AAAA
AA
AAAAAA
AAAA
AA
AAAAAA
AAAA
AA