Yakusha FAINA ZTISTA User manual

ZTISTA oval table
MATERIAL: Upcycled steel frame and live ZTISTA
material – a blend of cellulose, clay, flax fiber,
wood chips, biopolymer cover.
Wooden table top.
COLORS: 12 Ztista clors, semi-gloss GU 30.
The table top color: black, natural.
Suitable for 6-8 person.
Please kindly note that handcrafted items may
slightly differ in shades and textures.
Only for indoor use, outdoor is an option.
Natural wood loves care. To prevent stains please
use tablecloth or stands for hot and greasy
products.
Maximum load 30 kg.
Mostly made to order. Lead time 8-10 weeks
DIMENTIONS: 1500 х 1500 х 750 mm
APPROXIMATE WEIGHT: 70 kg
PACKAGE: 2 x Cardboard box :
1150 х 495 х 820 mm, 45 kg
1775 х 1175 х 160 mm, 48 kg
1700 mm
1100 mm 440 mm
1100 mm
740 mm

ASH
BLACK
ASH
NATURAL
ZTISTA oval table

ZTISTA oval table
TRANSPORTATION AND STORAGE:
The product should be transported and stored in the package in compliance with
safety precautions to avoid mechanical damage and exposure to atmospheric
precipitation.
PRODUCT RECEIVING RULES
Carefully inspect the product at the courier who delivered it. Pay attention to the
configuration, the quality of the appearance of the product, the effect of transfor-
mation mechanisms (if any). Remember that accepting a product without speci-
fying any flaws that may be detected when purchasing the product (visible flaws)
will deprive you of the right to refer to them in the future. Only after inspection
sign the act of acceptance of goods.
ALLOWED AND ARE NOT THE DISADVANTAGES:
- slight difference in the shade of the product of wood;
- a slight (within 10%) difference between the form and the photo of products.
All of the F A I N A items are created by craftsmen manually;
- slight (within 10%) color difference from photos of wood;
- texture and cracks in the wood, due to the artistic approach to the product;
- a creak of transformation mechanisms, which appears during use and is easily
eliminated by oil treatment.
BEFORE USE, READ THE FOLLOWING INFORMATION CAREFULLY:
-a new product may have a particular smell of materials used in the manufacture
of furniture, which disappears after a while;
- a slight difference in the shades of wooden parts because of anisotropy
(heterogeneity of properties along or across the fibres) is possible.
RULES FOR OPERATION OF WOODEN FURNITURE
1. It is not allowed to keep furniture in damp and not aired rooms. The optimal ope-
rating conditions for wooden furniture are warm, dry, ventilated rooms at a tempe-
rature of 18-25° and relative humidity of 40-65%.
2. In order to avoid drying out of wooden furniture or its wooden elements, it is re-
commended to have decorative sources of moisture in the room.
3. Do not place furniture in the immediate vicinity of the heating system.
4. Do not place hot objects or sharp-edged objects on the furniture surface. It is
important NOT to place hot teapots , pans etc. directly on the wooden surface as
it may cause white spots and cracking along the surface.
5. It is recommended to protect surfaces from solvents, alkalis and acids, as well
as fats.
To prevent stains please use tablecloth or stands for hot and greasy products.
6. It is recommended to protect from acetone, enzymes and other chemical and
cleaning agents.
7. Wooden furniture must be protected from various mechanical damages.
Strong hit may cause cracking of the surface.
8. Do not place wet, cold, or hot objects on a wooden surface, as this may result
in white spots on the surface.
9. It is recommended to observe the furniture care rules specified in the warranty,
in the passport and in the operating instructions.
10. Furniture must be installed on level surfaces.
11. Do not expose furniture to inappropriate loads. The load on the furniture should
be distributed evenly and not exceed the permissible norm.
12. To prevent damage to the floor when moving the product, raise the furniture
slightly above the floor.
13. Do not use cleaning or abrasive powders; there is a possibility that they can
enter into a chemical reaction or scratch the lacquer coating, which will accelera-
te the ageing of the wood!
14. When purchasing cleaning and care products for wood furniture, pay attention
to the composition of the products.
15. It is not recommended to step on the products, stand on the products at full
height, sit on tables and chests of drawers, swing the furniture.
To prevent accidents and damage to your furniture, do not allow children to climb
on or in it.
16. A creak during operation of the mechanism is not a defect and is eliminated by
lubricating the rubbing parts with silicone or high-purity machine oil.
IMPORTANT! When choosing a detergent, it is necessary to familiarize yourself with
the instructions for its use or consult with specialists of specialized enterprises.
CARE RULES
- The main rule of care is to wipe the dust with a dry cloth and only touch the sur-
face with a soft cloth — flannel, velvet, suede or special rags, the packaging of
which says “for decor or furniture”.
- In some rare cases, you can partially wipe the furniture with a damp cloth mois-
tened with water and soap.
- Removal of local contaminants (spots) must be done immediately, not allowing
them to dry. Do not try to scrape away dried spots.
WARRANTY
The warranty period for the operation of wood and ceramic products is 12 months
and is calculated from the date of sale specified in the warranty card, and in the
absence thereof from the date of shipment from the warehouse. Free maintenance
(furniture repair) occurs during the warranty period, subject to the conditions of
transportation, operation and recommendations for the care of the furniture. Free
warranty repair applies to furniture defects arising from the fault of the manufactu-
rer. Insufficiencies in the work performed that can be detected upon receipt of the
product (claims regarding the appearance of the product, lack of completeness, as
well as inconsistencies in the order, etc.) are accepted only upon receipt of the pro-
duct and provided that the unpacking was carried out by courier. In the future, such
claims are not accepted, all work is carried out only at the expense of the buyer.
NOTE! Unreasonable CALL for service is paid by the Buyer.
TERMS AND CONDITIONS OF DISCLAIMER
The manufacturer reserves the right to refuse warranty repair and maintenance and
qualify it as paid in the following cases:
- in the absence of this passport for the product. Attention! In case of loss, the
passport is not restored;
- on furniture with visible defects at the time оf purchase, which should have been
noticed by the consumer;
- furniture with defects that arose due to the fault of the consumer, due to damage
from loads exceeding the established norms;
- if product defects have arisen as a result of a consumer's violation of the opera-
ting rules and care recommendations;
- damage to the product and its loss as a result of natural factors (fires, floods,
earthquakes, accidents, etc.);
- if the furniture has mechanical damage that occurred during improper use;
- if the furniture has damage to the inside of the product of unsuitable objects,
liquids, animals, insects, has scratches and stains on the surface resulting from a
careless attitude and improper care during operation;
- if damaged in deliberate or erroneous actions of the consumer;
- if the furniture was used not in accordance with the requirements of the instruc-
tions for assembly and operation;
- damage to the product as a result of changes in its design.
NOTE! CLAIMS ON CONTAMINATION OF THE PRODUCT DUE TO OPERATION
ARE NOT ACCEPTED.
PROCEDURE FOR CLAIMS SUBMISSION.
1. Claims on the appearance of the product, the incompleteness of the set are ac-
cepted only directly upon receipt of the product. Further in future, such claims
are not accepted, all work is carried out only at the expense of the buyer. Claims
for the quality and completeness of furniture should be sent by the buyer to the
store where the furniture was purchased. Free and paid service is carried out at
the written request of the buyer.
2. The term of repair and satisfaction of the buyer's requirements corresponds to
the period specified in the law “On Protection of Consumer Rights”. By agreement
of the parties, this period may be extended.
3. The nature of the defect is established by a company specialist. Based on the
results of the inspection, he draws up an act of inspection of the furniture and intro-
duces the buyer to it. Repair is carried out at home or at the enterprise, depending
on the nature of the defect.
4. Claims shall not be accepted in case of defects arising due to non-compliance
by the buyer with the rules of transportation, storage, operation, and maintenance
of the furniture.
TERMS AND CONDITIONS OF ADDITIONAL SERVICE
Furniture with defects that arose due to the fault of the Buyer due to breakdowns,
breaks from excessive loads, can be restored and/or repaired at the Buyer's expen-
se. After the warranty period, the manufacturer provides aftersales service at the
buyer's expense.
40-65%
25°С
18°С

Rapair manual for ZTISTA products
All ZTISTA products are supplied with appropriate color water-based acrylic paint to have
a possibility to make small repairing of non-deep scratches and defects.
No harmful vapours are released, and additional ventilation is not required.
Paint may be applied only at temperatures between 5°C and 35°C.
1. If the damage is minor (scratches)
they can be painted.
To do this, take:
-ear stic;
-toothpick;
-a brush;
-a small tampon;
1.1. Surfaces must be clean and dry.
Contaminants such as dirt, dust,
grease, wax, oil, soap film, bond
breakers and curing compounds
must be removed before application.
1.2. Mix the paint thoroughly before use. Easily soak a brush or etc. in the paint and apply
first coat over the scratch.
Wait 1 hour and re-apply. Low temperature, high humidity, thick films or poor ventilation
will increase these dry time. After two layers we recommend to leave the product for 12 hours
to dry properly. Dry Time Based on 25°C, 50% RH;
Dry Time: Touch - 20 Minutes; Recoat – 1 hour;
2. If the damage is more significant (cracks, splits, broken structure).
You need to prepare a flour and water mixture and fill the crack with it.
In a small container ≈100 g pour a teaspoon of PVA glue.
Add a teaspoon of flour to PVA glue.
PVAFLOUR
2.2. Fill the crack with
the mixture.
2.1. Add gradually and mix
thoroughly until there are no lumps.
You need to get smooth,
flexible like plasticine structure.
2.3. Wait 20 minutes for self-drying or dry with warm air at a
distance of 10 cm for 5 minutes.
100 mm
SELF-DRYING USING A HAIR DRYER
2.4. Paint the restored place as shown in paragraph 1.
Scan the QR code to watch detailed video instruction
ZTISTA oval table

ZTISTA oval table
2.1. Place the tabletop on a clean and
flat floor on the foam upside down, as
shown. In the picture.
1.1. Assembled table
2.2. Fix the leg on the tabeltop with
self-tapping screws
1.2. Disassembled table
2.3. Carefully flip
the table.