Yamaha YSP-4000 User manual
OWNER'S
MANUAL
IMPORTANT
SAFETY
INSTRUCTIONS
&
CAUTION
RISK
OF
ELECmlC
SHOCK
DO
NOT
OPEN
"------'
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING
TO
QUALIFIED SERVICE PERSONNEL.
•Explanation of Graphical Symbols
The
lightning flash with
arrowhead
symbol,
within an equilateral triangle, is intended to
alert you to the presence
of
uninsulated
"dangerous
voltage" within the
product's
enclosure
that may
be
of
sufficient
magnitude
to constitute arisk
of
electric
shock
to
persons.
The
exclamation
point within an equilateral
triangle is intended to
alert
you to the
presence
of
important
operating
and
maintenance
(servicing) instructions in the
literature
accompanying
the appliance.
En
1Read these instructions.
2Keep these instructions.
3Heed all warnings.
4Follow all instructions.
5Do not use this apparatus near water.
6Clean only with dry cloth.
7Do not block any ventilation openings. Install in accordance with
the manufacturer's instructions.
8Do not install near any heat sources such as radiators, heat
registers, stoves,
or
other apparatus (including amplifiers) that
produce heat.
9Do not defeat the safety purpose
of
the polarized
or
grounding-
type plug. Apolarized plug has two blades with one wider than
the other. Agrounding type plug has two blades and athird
grounding prong. The wide
blade
or
the third prong are provided for your safety.
If
the
provided plug does not
fit
into your outlet, consult an electrician
for replacement
of
the obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11 Only use attachments/accessories specified
by
the manufacturer.
12
Use only with the cart, stand, tripod, bracket, •
or table specified by the manufacturer,
or
sold with the apparatus. When acart
is
used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13
Unplug this apparatus during lightning
storms or when unused for long periods
of
time.
14 Refer all servicing to qualified service personnel. Servicing
is
required when the apparatus has been damaged in any way, such
as power supply cable
or
plug
is
damaged, liquid has been spilled
or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
IMPORTANT
SAFETY
INSTRUCTIONS
FCC INFORMATION (for US customers)
1.
IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product. when installed as indicated in the instructions
contained
in
this manual, meets FCC requirements.
Moditications not expressly approved
by
Yamaha may void
your authority, granted
by
the FCC. to use the product.
2. IMPORTANT:
When connecting this product to accessories and/or another
product use only high quality shielded cables. Cable/s supplied
with this product MUST be used. Follow all installation
instructions. Failure to follow instructions could void your FCC
authorization to use this product in the USA.
3. NOTE:
This product has been tested and found to comply with the
requirements listed in FCC Regulations, Part
15
for Class "B"
digital devices. Compliance with these requirements provides a
reasonable level
of
assurance that your use
of
this product
in
a
residential environment will not result
in
harmful interference
with other electronic devices.
This equipment generates/uses radio frequencies and, if not
installed and used according to the instructions found
in
the
users manual, may cause interference harmful to the operation
of
other electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur
in
all installations. If this product
is
found to be the source
of
interference, which can be determined
by
turning the unit "OFF" and "ON", please try to eliminate the
problem
by
using one
of
the following measures:
Relocate either this product or the device that is being affected
by
the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install
AC
line tilter/s.
In
the case
of
radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in
is
300 ohm ribbon lead, change
the lead-in to coaxial type cable.
If
these corrective measures do not produce satisfactory results,
please contact the local retailer authorized to distribute this type
of
product. If you can not locate the appropriate retailer, please
contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe
Ave,
Buena Park, CA 90620.
The above statements apply ONLY to those products distributed
by
Yamaha Corporation
of
America
or
its subsidiaries.
We Want
You
Listening For ALifetime
Yamaha
and
the Electronic Industries
Association's
Consumer
Electronics
Group
want you to get the most out
of
your
g
equipment
by playing it at asafe level.
One
that lets the
sound
come
through loud
and
clear
without annoying
blaring
or
distortion -and, most importantly, without affecting
your
sensitive hearing. \0
Since hearing
damage
from loud sounds is often undetectable until it is too late, Yamaha
and
the Electronic Industries
....
Association's
Consumer
Electronics
Group
recommend
you
to avoid prolonged exposure from excessive volume levels.
~
ii
En
Caution:
Read
this
before
operating
this
unit.
1To assure the finest performance, please read this manual
carefully. Keep
it
in
asafe place for future reference.
2Install
this
sound
system
in
a
well
ventilated, cool,
dry,
clean place
with
at
least 5
cm
(2
in)
ofspace above
(or
below)
this
unit
-
away
from
direct sunlight, heat sources, vibration, dust, moisture, and/or cold.
3Locate this unit away from otherelectrical appliances. motors, or
transformers to avoid humming sounds.
4Do not expose this unit to sudden temperature changes from cold
to hot, and do not locate this unit in an environment with high
humidity (i.e. aroom with ahumidifier) to prevent condensation
inside this unit. which may cause an electrical shock, fire,
damage to this unit, and/or personal injury.
5Avoid installing this unit where foreign object may fall onto this
unit and/or this unit may be exposed
to
liquid dripping or
splashing. On the top
of
this unit. do not place:
..
Other components, as they may cause damage and/or
discoloration on the surface
of
this unit.
-Burning objects (i.e. candles), as they may cause fire, damage
to
this unit. and/or personal injury.
-Containers with liquid
in
them. as they may fall and liquid may
cause electrical shock to the user and/or damage
to
this unit.
6Do not cover this unit with anewspaper, tablecloth, curtain, etc.
in
order not to obstruct heat radiation.
If
the temperature inside
this unit rises, it may cause fire, damage to this unit, and/or
personal injury.
7Do not plug in this unit to awall outlet until all connections are
complete.
8Do not operate this unit upside-down.
It
may overheat, possibly
causing damage.
9Do not use force on switches, knobs and/or cords.
10
When disconnecting the power supply cable from the wall outlet,
grasp the plug; do not pull the cable.
11 Do not clean this unit with chemical solvents; this might damage
the finish. Use aclean, dry cloth.
12
Only voltage specified on this unit must be used. Using this unit
with ahigher voltage than specified is dangerous and may cause
fire. damage to this unit, and/or personal injury. Yamaha will not
be held responsible for any damage resulting from use
of
this unit
with avoltage other than specified.
13
To
prevent damage
by
lightning, keep the power supply cable
disconnected from awall outlet
or
this unit during alightning
storm.
14
Do not attempt to modify or
fix
this unit. Contact qualified
Yamaha service personnel when any service is needed.
The cabinet should never be opened for any reasons.
15
When not planning to use this unit for long periods
of
time (i.e.
vacation), disconnect the power supply cable from the wall
outlet.
16
Be sure
to
read the "Troubleshooting" section on common
operating errors before concluding that this unit is faulty.
17 Before moving this unit. press STANDBY/ON to set this unit
in
standby mode, and disconnect the power supply cable from the
wall outlet.
18
Condensation will form when the surrounding temperature
changes suddenly. Disconnect the power supply cable from the
outlet. then leave the unit alone.
19
When using the unit for along time. the unit may become warm.
Turn the power off. then leave the unit alone for cooling.
20
Install this unit near the
AC
outlet and where the
AC
power plug
can be reached easily.
21 The batteries shall not be exposed to excessive heat such as
sunshine. fire or the like.
iii En
WARNING
TO
REDUCE THE RISK
OF
FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
WARNING
THE
POWER SUPPLY CABLE
OF
THIS UNIT MUST BE
CONNECTED TO THE MAIN SOCKET OUTLET VIA A
PROTECTIVE EARTHING CONNECTION.
This unit is not disconnected from the AC power source as long as
it is connected to the
AC
wall outlet. even
if
this unit itself is
turned off
by
STANDBY/ON. This state is called the standby
mode.
In
this state. this unit is designed to consume avery small
quantity
of
power.
IMPORTANT
Please record the serial number
of
this unit in the space below.
MODEL:
Serial No.:
The serial number is located on the rear
of
the unit. Retain this
Owner's Manual in asafe place for future reference.
FOR CANADIAN CUSTOMERS
To
prevent electric shock, match wide blade
of
plug to wide slot
and fully insert.
This Class Bdigital apparatus complies with Canadian ICES-003.
FOR U.K. CUSTOMERS
If
the socket outlets in the home are not suitable for the plug
supplied with this appliance,
it
should be cut off and an
appropriate 3-pin plug fitted. For details. refer to the instructions
described below.
Note
The plug severed from the mains
lead
must
be
destroyed.
as
aplug with
abared flexible cord
is
hazardous ifengaged
in
alive socket outlet.
IMPORTANT
THE
WIRES
IN
THIS
MAINS
LEAD
ARE
COLOURED
IN
ACCORDANCE
WITH
THE
FOLLOWING
CODE:
GREEN-AND-
YELLOW:
EARTH
BLUE:
NEUTRAL
BROWN:
LIVE
As the colours
of
the wires in the mains lead
of
this apparatus may
not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND-YELLOW must be
connected to the terminal in the plug which is marked
by
the leller
"E"
or
the safety earth symbol or coloured GREEN or GREEN-
AND-YELLOW.
The wire which is coloured BLUE must be connected to the
terminal marked with the letter
"N"
or
coloured BLACK.
The wire which is coloured BROWN must be connected
to
the
terminal marked with the letter
"L"
or coloured RED.
CAUTION
Danger
of
explosion
if
battery
is
incorrectly replaced. Replace
only with the same or equivalent type.
CAUTION
Use
of
controls
or
adjustments
or
performance
of
procedures other
than those specified herein may result in hazardous radiation
exposure.
Contents
INTRODUCTION
Overview 2
Features 3
Using this manual 5
Supplied accessories 6
Controls
and
functions 7
Front panel 7
Front panel display 8
Rear panel 9
Remote control (Europe, Australia, Asia,
and Korea models)
II
Remote control (U.S.A. and Canada models)
14
PREPARATION -
Installation
17
Before installing this unit
17
Installing this unit
17
Connections 20
Before connecting components
21
Connections using HDMI cables 22
Connecting aTV 23
Connecting aDVD player/recorder 24
Connecting adigital satellite tuner or acable
TV
tuner 25
Connecting adigital airwave tuner 26
Connecting aportable audio player 27
Connecting other external components 28
Connecting asubwoofer 29
Connecting the
FM
antenna
30
About the RS-232CIIR-OUTIIR IN terminals 30
Connecting the AC power supply cable
31
SETUP
Getting started 32
Installing batteries in the remote control 32
Operation range
of
the remote control 32
Turning on this unit or
setting it to the standby mode 33
Using SET MENU 34
Displaying the OSD (on-screen display) 34
The flow chart
of
SET MENU 35
Changing OSD language 36
AUTO SETUP (IntelliBeam) 37
The flow chart
of
AUTO SETUP 37
Installing the IntelliBeam microphone 38
Using AUTO SETUP (IntelliBeam) 39
Using the system memory 44
Convenient usage
of
the system memory 44
Saving settings 44
Loading settings 45
BASIC OPERATION
Playback
47
Selecting the input source 47
Playing back sources 48
Adjusting the volume 49
FM tuning 50
FM
controls and functions
50
Automatic tuning
51
Manual tuning
51
Automatic preset tuning 52
Manual preset tuning 53
Selecting apreset station 54
Displaying the Radio Data System information
(Europe model only) 54
Enjoying
surround
sound 56
5Beam
56
Stereo plus 3Beam 57
3Beam 57
My Surround 57
Enjoying 2-channel sources
in surround sound 59
Enjoying TV
in
surround sound 60
Adjusting surround mode parameters
61
Enjoying stereo sound 62
2-channel stereo playback 62
5-channel stereo playback 62
Playing back sound clearly (My Beam) 63
Using auto-adjust function 63
Using manual-adjust function 64
Using sound field programs 65
CINEMA DSP programs 67
Using the music enhancer 70
Using the volume mode
(Night listening enhancer/
TV volume equal mode)
71
Using the sleep timer 72
Displaying the input source information 74
Using the HDMI control feature 75
ADVANCED OPERATION
MANUAL SETUP 76
Using MANUAL SETUP 77
BEAM MENU 78
SOUND MENU 82
INPUT MENU 84
DISPLAY MENU 88
Adjusting the audio balance 90
Using the test tone 90
Using the audio output being played back
91
Selecting the input mode 93
Adjusting the system parameters 94
Using the system parameters 94
Setting the MEMORY PROTECT 95
Setting the MAX VOLUME 96
Setting the TURN ON VOLUME 96
Setting the MONITOR CHECK 97
Setting the DEMO MODE 98
Setting the PANEL INPUT
KEy
99
Disabling the front panel keys 100
Setting the FACTORY PRESET
101
Remote control features 103
Setting remote control codes
103
Controlling other components
104
Using the TV macro
107
ADDITIONAL INFORMATION
Troubleshooting 109
Glossary 113
Index 115
Specifications 116
List of remote control codes .i
1En •
Overview
It
is
generally accepted that in order to fully enjoy the benefits
of
surround sound at home, you must endure the agony
of
wiring and installing agreat number
of
speakers in the hope that your listening room will give you the same kind
of
surround sound experience
as
your local movie theater.
Yamaha YSP-4000 Digital Sound Projector challenges this preconception that complicated speaker setup and
troublesome wiring go hand-in-hand with the enjoyment
of
multi-channel surround sound.
This slimline unit does away with the need for complicated wiring and installation worries, leaving you with aunit that
is
not only easy to set up, but
is
also capable
of
reproducing the kind
of
powerful surround sound you have been waiting for
from its built-in 2woofers and
40
full-range small speakers.
You
can fine-tune the parameters
of
this unit to adjust the delay time for separate sound beams, resulting in highly
directional sound that comes in on the listening position from all directions.
The YSP-4000 projects sound beams containing surround sound information for the front right (R), front left (L),
surround right (SR), and surround left (SL) speaker positions, which are reflected off the walls
of
your listening room
before reaching the actual listening position. With the addition
of
center (C) sound beams, this Digital Sound Projector
creates true-to-life 5. I-channel surround sound that makes you
fed
as
ifthere are actual speakers around the room.
Sit back and enjoy the real sound experience
of
this simple. yet stylish Digital Sound Projector.
Imaginary
front right
speaker
2En
Imaginary
center
__
oJ
speaker
Imaginary
surround left
speaker
Listening position
Features
Digital Sound
Projector™
The Digital Sound Projector technology allows one slim
unit to control and steer multiple channels
of
sound to
generate multi-channel surround sound, thus eliminates
the need for satellite loudspeakers and cabling normally
associated with conventional surround sound systems.
This unit also employs the beam modes that let you enjoy
the surround sound
(5
Beam, Stereo plus 3Beam, 3Beam,
and My Surround), 2-channel and 5-channel stereo
playback, and My Beam.
My Surround
In addition to the above mentioned beam modes, this unit
is equipped with My Surround beam mode that allows you
to enjoy surround system even in asmall listening area.
My Beam
This unit employs My Beam that ensures aclear sound
in
anoisy environment.
You
can adjust the beam angle
manually
or
automatically using the supplied remote
control to the maximum
of
45°, rightward and leftward.
Cinema DSP
This unit employs the Cinema DSP technology developed
by
Yamaha Electronics Corp. that lets you experience
movies at home with all the original dramatic sound
impact.
HDMITM
(High-Definition Multimedia Interface)
•HOM! interface for standard, enhanced,
or
high-definition
video (including I080p video signal transmission) as well as
multi-channel digital audio based on HDCP
•Simple and easy connections with HOM! supported external
components
•Functional link with
an
HOM! control-compatible TV
•Analog video up-scaling from 480i (NTSQ/576i (PAL)
or
480p
(NTSQ/576p
(PAL) to
nOp
or 1080i
Versatile Remote Control
The supplied remote control comes with preset remote
control codes used to control the DVD player, VCR, cable
TV tuner, and digital satellite tuner connected to this unit.
In addition, the remote control is equipped with the macro
capability that enables aseries
of
operations with the press
of
asingle button.
AUTO SETUP (InteIliBeam)
This unit employs the automatic sound beam and acoustic
optimization technology with the aid
of
the supplied
IntelliBeam microphone.
You
can avoid troublesome
listening-based speaker setup and achieve highly accurate
sound beam adjustments that best match your listening
environment.
Compatibility with the Newest Technologies
This unit employs decoders compatible with Dolby
Digital, DTS, Dolby Pro Logic, Dolby Pro Logic II, DTS
Neo:6, Music Enhancer, and Neural Surround.
•Dolby Digital
This
is
the standard audio signal format used on various
digital media such
as
DVD, Blu-Ray, and
HD
DVD. This
surround technology delivers high-quality digital audio for up
to
5.1
discrete channels to produce adirectional and more
realistic effect.
.DTS
This
is
the standard audio signal format used on various
digital media such
as
DVD, Blu-Ray, and HD DVD. This
surround technology delivers high-quality digital audio for up
to
5.1
discrete channels to produce adirectional and more
realistic effect.
•Dolby Pro Logic
This sophisticated, matrix decoding technology up-converts
any 2-channel source audio to a5.I-channel full bandwidth
playback, resulting
in
asurround sound experience.
•Dolby Pro Logic
II
This
is
aredesigned version
of
Dolby Pro Logic that employs
2stereo surround channels, asubwoofer, and agreatly
enhanced steering logic. This improved technology provides
an
exceptionally stable sound field that simulates
5.1
to a
much greater degree than the original Dolby Pro Logic.
•DTS Neo:6
This technology decodes the conventional 2-channel sources
for 6-channel playback, enabling playback with the full-range
channels with higher separation. Music mode and Cinema
mode are available to play back music and movie sources
respectively.
•Music Enhancer to improve the sound quality
of
compression
artifacts such as the MP3 format.
•Neural Surround decoder (U.S.A and Canada models only)
Sophisticated FM tuner
•40-station random and direct preset tuning
•Automatic preset tuning
•Radio Data System capability (Europe model only)
XMTM
Satellite Radio
(U.S.A. and Canada models only)
•
XM
Satellite Radio tuning capability (using the
XM
Mini-
Tuner Dock, and Antenna sold separately
by
XM
Satellite
Radio)
•Neural Surround decoder to play back the XM HD content
of
XM
Satellite Radio broadcasts
in
multi-channels, resulting
in
afull surround sound experience
•
XM
Satellite Radio information displaying capability
iPod™
Controlling Capability
(U.S.A., Canada, and Australia models only)
•DOCK terminal
to
connect aYamaha iPod universal dock
(such as the YDS-I
O.
sold separately), which supports iPod
(Click and Wheel), iPod nano. and iPod mini
•Playback information displaying capability
•Battery charging capability
3
En
•
Features
Inte\liBeam
The "'ntell/Beam "logo and "lnteIliBeam" are trademarks
of
YAMAHA CORPORATION.
ICINEM~
The
"!CINEM&'i'S!'jI"
logo and "Cinema DSP" are registered
trademarks of YAMAHA CORPORATION.
IX)IDOLBY1
DIGITAL
'ii'·lt.lj'M
..
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic", and the double-D symbol are trademarks
of
Dolby Laboratories.
edtS
Digital
Surround
INeo:.
"DTS" and "Neo:6" are registered trademarks
of
DTS, Inc.
Hom.
"HDMI", the "HDMI" logo and "High-Definition Multimedia
Interface" are trademarks or registered trademarks
of
HDMI
Licensing LLC.
4
En
Manufactured under license from ILtd. Worldwide patents
applied
for.
The"
G)
"logo and "Digital Sound Projector"'" are trademarks
of
ILtd.
SASC.)
ij!j:fttj
TruBass, SRS and
the"
Ce)
"symbol are registered trademarks
of
SRS Labs, Inc. TruBass technology is incorporated under
license from SRS Labs, Inc.
I'!\
EUPHONY
'"
EUPHONY
H'
is
atrademark
of
DiMAGIC Co., Ltd.
Using
this
manual
~llf;lil
•This manual describes how to connect and operate this unit. For details regarding the operation
of
external components, refer to the
supplied owner's manual for each component.
•Operations
in
this manual use keys on the supplied remote control
of
this unit unless otherwise specitied.
• "
••
indicates atip for your operation.
•This manual is printed prior to production. Designs and specifications are subject to change in part as aresult
of
improvements, etc.
In
case
of
differences between the manual and the product, the product has priority.
1Install this unit in your listening room.
See "Installation" on page
17.
2Connect this unit to your TV and other external components.
See "Connections" on page 20.
3Prepare the remote control and turn on the power of this unit.
See "Getting started" on page 32.
4Run AUTO SETUP.
See "AUTO SETUP (IntelliBeam)" on page 37.
5Play back asource.
See "Playback" on page 47.
6Change the beam modes and/or CINEMA DSP settings.
See "Enjoying surround sound" on page 56.
If you want to make additional settings
and adjustments
7Run MANUAL SETUP to fine-tune settings and/or set remote control codes.
See "MANUAL SETUP" on page 76 and "Remote control features" on page
103.
5
En
•
Supplied
accessories
Check that you have received all
of
the following parts.
Remote
control
(x1) Fasteners (x4) Optical
cable
(x1)
(WhitelRed)
(Orange)
REFERENCE GUIDE
(iPodIXM Radio) (x1)
Audio
pin
cable
(x1)
Digital
audio
pin
cable
(x1)
Cable
clamp
(x1)
Cardboard
microphone
stand
(x1)
IntelliBeam
microphone
(x1)
000
eM
Lon
TeST
COOE.
su
DDm
GD
GJ
IE)
GD CEl G
@YAMAHA
'-..
~
ST
.....
DlY.ott
POWER
POW,"
~oe0
/,------
......
"'"
(U.S.A.
and
Canada
models)
YSP-JOtHI
...
_-_._._----------
'
...
"
..
_.,....,.,_
.
•
,J<-,
...........I
....
:",.,.·:,
.....
Batteries (x2)
(AA, R6, UM·3)
Indoor
FM
antenna (x1)
(U.S.A., Canada, and
Australia
models
only)
.-.".
-
....
+>
..
>
QUICK REFERENCE
GUIDE
1
(Yellow)
*OSD: On-Screen Display
050*
video
pin
cable (x1)
Demonstration
DVD
(x1)
AC
power
supply
cable
(x1) *The number
of
provided languages
varies depending on the model.
6En
Controls
and
functions
-"<:<':'1-::':'_',,<';:
Front
;.;.;.,.:.;.;
..
~':)
-::~::;,,<.~::.~
1
AUX3
INTELLIBEAM MIC
INPUT
-
VOLUME
+
STANDBY/ON
CD
Remote control sensor
Receives infrared signals from the remote control.
®Front panel display
Shows information about the operational status
of
this
unit.
@AUX 3input jack
Connect your portable audio player (see page 27).
@INTELLIBEAM MIC jack
Connect the supplied IntelliBeam microphone for AUTO
SETUP (see page 38).
®INPUT
Press repeatedly to switch between input sources (see
page 47).
Outputs atest tone to experience the sound beam (see
page 98).
®
VOLUME+/-
Controls the volume level
of
all audio channels (see
page 49).
(j) STANDBY/ON
Turns on the power
of
this unit
or
sets it to the standby
mode (see page 33).
·~~i~i~
•When you turn on this unit, you will hear aclick sound
followed by the 4to 5-second interval before sound
reproducing.
•
In
the standby mode, this unit consumes asmall amount
of
power
in
order to receive infrared signals from the remote
control or to search for HDMI signals.
7En •
Controls
and
functions
.-----t
t
t-
HCml'MED
SlBlEO
AUTO
MBllIlY'
~
,---
DOCK
P8
PTY
RT
CT XM
ill
(·)I:::: I:::: I:::: :::" I:::: I:::: ::::: I:::: I:::: I::::
:::11
I:::: I::::
:::11
I::::
il
~
..
"u
••
"
••••
"."
••••
"
••••••••
"
••••
"
••••
'
•••••••••••
D
••••••••••••
fN,
nHT
"'"
.....
. , . ,
.....
..... .....
.
...
, , ,
U'
II,.,
...
I....
I.... I....
I""
I'"
..
BLEEP
"'"
•••••
I....
....•
I....
I....
.,1"
...•.
...•.
. .
8-9~;,i
~~_o
0_0
gO·I~O-
00_
-f
-g
go
_
0-
-.
-
..
CD
HDMI
indicator
Lights
up
when the signal
of
the selected input source
is
input at the HDMI IN jack(s).
®TUNER
indicators
FM: Light
up
when this unit
is
receiving an FM broadcast.
XM: MEMORY flashes during the XM preset operation
(U.S.A. and Canada models only).
@CINEMA DSP
indicator
Lights up when asound field program
is
selected (see
page 67).
@PCM
indicator
Lights up when this unit is reproducing PCM (Pulse Code
Modulation) digital audio signals.
®Decoder
indicators
Light
up
when the corresponding decoder operates
(see page 58).
Note)
The neural decoder is available for the U.S.A. and Canada models
only.
®ENHANCER
indicator
Lights up when the Music Enhancer is selected (see
page 70).
(J)
Volume level
indicator
Displays the current volume level.
®DOCK
indicator
(U.S.A., Canada, and Australia models
only)
Lights up when your iPod (Click and Wheel), iPod nano,
or iPod mini is connected to this unit via the DOCK
terminal on this unit.
®SRS TruBass
indicator
Lights up when TruBass
is
turned on (see page 84).
@EQUAL
indicator
Lights up when the TV volume equal mode
is
selected
(see page 71).
8En
®NIGHT
indicator
Lights
up
when one
of
the night listening enhancers
is
selected (see page 71).
@SLEEP
indicator
Lights up when the sleep timer is set (see page 72).
@Radio Data System
indicators
(Europe
model
only)
Show the current Radio Data System status.
@
XM
indicator
(U.S.A. and Canada
models
only)
Lights up when XM
is
selected as the input source.
@Multi-information
display
Shows information with alphanumeric characters when
you adjust the parameters
of
this unit.
@
Input
channel
indicators
Show information when you adjust the parameters
of
this
unit. The channel component
of
the current digital input
signal is displayed (see page 58).
(Qf§][B)
@
~
I
LFE
I
~\r.<-:.
You
can adjust the brightness and display setting
of
the front
panel display using the F.DISPLAY
SET
parameter
in
MANUAL
SETUP (see page 88).
Controls
and
functions
Itear
paneL';'
.
..
-.
';".~
-
.-"
.
-,
'.
,"
,
14
1
13
11
10
9
CD
®
8
~
I
U
OUT
,
ANTENNA
I
(U.S.A. and Canada models)
~
COOIPC»IOO
~oo
~I
DVO
AUX21-IG~
e
'-€
e
'-€
e
'-€
e
E)co.u,
...
e
~
6' e
~
i~
(3
eee
IiliJ
I
!>jJ~"~
I
OJ
'"
CJ
r:i~l~'DEo
OUT
~l~STB-
~~_NA_UX_2+-A_U~l
TV_IST_A_UBDI_O_~~_X_l
_D_OC_K
__
--tE_TV_IS_~_~_AL_~_U~_l+_--X"--'-R
'_N
__
R_S-_23_2C
__
--'
~-~-
18~
~~
-~
The illustration below shows the rear panel
of
the U.S.A. and Canada models.
CD
AUX 1HDMI
IN
jack
Connect your digital satellite tuner, cable TV tuner. digital
air wave tuner,
or
game console via an HDMI connection
(see page 22).
®
DVD
HDMIIN
jack
Connect your DVD player via an HDMI connection (see
page 22).
@HDMI OUT
jack
Connect to the HDMI IN jack on your HDMI component
such as aTV or aprojector connected to this unit (see
page 22).
G) AC IN
Connect the supplied
AC
power supply cable
(see page 31).
®IR-OUT
terminal
This is acontrol expansion terminal for commercial use
only (see page 30).
®ANTENNA
jack
Connect the FM antenna (see page 30).
(j) SUBWOOFER
jack
Connect your subwoofer (see page 29).
®Tv/STB AUDIO
IN
jacks
Connect your
TV,
digital satellite tuner,
or
cable TV tuner
via an analog connection (see pages
23
and 25).
®AUX 1AUDIO IN
jacks
Connect an external component via an analog connection
(see page 24).
@)
DOCK terminal
(U.S.A., Canada, and Australia
models
only)
Connect the Yamaha iPod universal dock (such as YDS-
10.
sold separately) (see page 2in the Reference Guide).
(jJ)
DVD COAXIAL DIGITAL IN
jack
Connect your DVD player via acoaxial digital connection
(see page 24).
@AUX 2COAXIAL DIGITAL
IN
jack
Connect
an
external component via acoaxial digital
connection (see page 28). •
9En
Controls
and
functions
@XM antenna jack
(U.S.A and Canada models only)
Connect your XM Mini-Tuner Dock (sold separately)
(see page 5in the Reference Guide).
@
IR IN
terminal
This
is
acontrol expansion terminal for commercial use
only (see page 30).
@RS-232C terminal
This
is
acontrol expansion terminal for commercial use
only (see page 30).
@SYSTEM CONNECTOR terminal
(U.S.A. and Canada models only)
Use to connect aYamaha subwoofer equipped with a
SYSTEM CONNECTOR terminal to this unit.
®VIDEO
OUT
jack
Connect to the video input jack
of
your TV via a
composite analog video connection to display the OSD
of
this unit (see page 23).
@COMPONENT VIDEO
OUT
jacks
Connect to the video input jacks
of
your TV via a
component analog video connection to display the OSD
of
this unit (see page 23).
@l
STB VIDEO
IN
jacks
Connect adigital satellite tuner or acable TV tuner via a
composite analog video connection (see pages
25
to 26).
®STB COMPONENT VIDEO IN jacks
Connect adigital satellite tuner or acable TV tuner via a
component analog video connection (see pages
25
to 26).
@DVD/AUX 2VIDEO IN jacks
Connect aDVD player/recorder or an external component
via acomposite analog video connection
(see pages 24 and 28).
@DVD/AUX 2COMPONENT VIDEO IN jacks
Connect aDVD player/recorder or an external component
via acomponent analog video connection (see pages 24
and 28).
®AUX 1VIDEO
IN
jacks
Connect an external component via acomposite analog
video connection (see page 28).
@TV/STB OPTICAL DIGITAL
IN
jack
Connect your
TV,
digital satellite tuner,
or
cable TV tuner
via an optical digital connection (see pages 23 and 25).
®AUX 1OPTICAL DIGITAL IN jack
Connect an external component via an optical digital
connection (see page 28).
10
En
[fem
This section describes the functions
of
the remote control
used to control this unit. Some buttons marked with an
asterisk
(*)
share the common functions between the YSP
and TV/AV operation modes
(@).
,0,
:<i>~
You
can also control other components using the remote control
once you set the appropriate remote control codes. See
"Controlling other components" on page
104
for details.
CDl------,
,....----@
_-L----J.._
*
Controls
and
functions
CD
Infrared window
Outputs infrared control signals. Aim this window at the
component you want to operate.
®STANDBY/ON
Sets this system to the standby mode (see page 33).
@Transmission indicator
Lights up when infrared control signals are being output.
@)
Input selector buttons
Use to select
an
input source (DVD, AUX1, AUX2,
AUX3, STB, TV,
or
FM).
®VOL MODE
Turns on or offthe volume modes (see page 71).
®AUTO SETUP
Enters the AUTO SETUP menu (see page 37).
(J)
CINEMA DSP program buttons
Select the CINEMA DSP programs (see page 65).
®ENHANCER
Turns on
or
offthe Music Enhancer (see page 70).
®Cursor buttons
6.
/
"V
/
<1/
~,
ENTER
Select and adjust SET MENU items.
@)
DISPLAY
Displays information on the selected input signal.
@
VOLUME+/-
Increases or decreases the volume level
of
this unit (see
page 49).
@MUTE
Mutes the sound. Press again to restore the audio output to
the previous volume level (see page 49).
@TV INPUT
Toggles between the input sources on the TV (see
page 104).
@CH LEVEL
Adjusts the volume level
of
each channel (see page 91).
@TEST
Outputs atest tone when adjusting the output level
of
each
channel (see page 90).
11
En •
Controls
and
functions
@DVD playerNCR control buttons
Control your DVD player or VCR (see pages
105
and
106).
@My Beam microphone
Collects the test tones from this unit when using the My
Beam auto-adjust function (see page 63).
@
TV
POWER
Turns on the power
of
your TV or sets it to the standby
mode (see page 104).
@
AV
POWER
Turns on the power
of
the selected component or sets it to
the standby mode (see pages
105
and 106).
@INPUT1
Switches the input source on your TV (see page 104).
@MACRO
Use to set the TV macro (see page 107).
@
I.
Switches the preset station number
(I
to 8) when this unit
is
receiving an FM broadcast (see page 54).
@A-E
Switches the preset station group (A to
E)
when this unit
is
receiving an FM broadcast (see page 54).
@SLEEP
Sets the sleep timer (see page 72).
@INPUTMODE
Toggles between input modes (AUTO, DTS, and
ANALOG) (see page 93).
®l
Beam mode buttons
Change the beam mode settings (see pages 56, 62, and
63).
@
SUR.
DECODE
Selects the surround mode for playback (see page 59).
@MENU
Displays the setup menu on your TV monitor (see
pages 39 and 77).
®l
Operation mode selector
Selects the operation mode
of
this unit. Select YSP when
operating this unit and select TV/AV when operating your
TV or other
AV
components.
12 En
@RETURN
Selects sleep timer settings
or
returns to the previous
SET
MENU screen.
®TV VOL
+1-
Adjusts the volume level
of
your TV (see page 104).
@CH
+1-
Changes the channels
of
your
TV,
digital satellite tuner,
cable TV tuner, or VCR (see pages 104 and 106).
@
TV
MUTE, CODE SET
Mutes the audio output
of
your TV (see page 104).
Sets
up
remote control codes (see page 103).
The functions @and ®are available only when the
FM
stations
are preset.
This section describes the functions
of
the remote control
used to control FM, Radio Data System, or iPod when the
TV/AV mode is selected with the operation mode selector
(0).
Note that the Radio Data System controls are
available for Europe model only, and the iPod controls are
available for Australia model only.
Controls
and
functions
CD
PRESETITUNE
FM: Switches between the preset search mode and the
frequency search mode (see pages
51
to 54).
®Numeric buttons
FM: Enter numbers.
@Cursor buttons
.6.
/
'7
/
<1/
~
,ENTER
FM: Use ENTRY
~
(.6.1'7)
to change the preset station
number (I to 8)
or
frequency level (see pages
51
to 54).
Use A-E
~.
(<1/~)
to change the preset station group (A to
E) (see pages 53 and 54). Use ENTER to confirm the input
above.
'"
~<i>:'
These functions are also available when this unit
is
receiving the
Radio Data System (see page 54) or playing back your iPod (see
page 2
in
the Reference Guide).
G) DISPLAY
Radio Data System and iPod: Displays information when
this unit is receiving the Radio Data System (see page 54)
or playing back your iPod (see page 2in the Reference
Guide).
®MEMORY
FM: Stores the preset stations (see pages 52 and 53).
,::'(,<:.
This function
is
also available when this unit
is
receiving the
Radio Data System (see page 54).
®SEARCH
FM: Switches between automatic and manual tuning (see
page 51).
oOperation mode selector
Selects the operation mode
of
this unit. Select YSP when
operating this unit and select TV/AV when operating your
TV or other
AV
components.
13 En •
Controls
and
functions
This section describes the functions
of
the remote control
used to control this unit. Some buttons marked with an
asterisk
(*)
share the common functions between the YSP
and TV/AV operation modes (@l).
,I,
~<il~
You
can also control other components using the remote control
once you set the appropriate remote control codes. See
"Controlling other components" on page 104 for details.
CD
Infrared window
Outputs infrared control signals. Aim this window at the
component you want to operate.
®STANDBY/ON
Sets this system to the standby mode (see page 33).
@Transmission indicator
Lights up when infrared control signals are being output.
14
En
CD)------..
,...---~®
*
=-+-'""""'i':331 *
@Input selector buttons
Use to select an input source (DVD, AUX1, AUX2,
AUX3IDOCK, STB, TV, or
FMlXM).
®VOL MODE
Turns on or off the volume modes (see page 71).
®AUTO SETUP
Enters the AUTO SETUP menu (see page 37).
CD
Sound field program buttons
Select the sound field programs (see page 65).
®ENHANCER
Turns on or offthe Music Enhancer (see page 70).
®Cursor buttons
D..
/
'V
/
<J
/
~,
ENTER
Select and adjust SET MENU items.
@)
DISPLAY
Displays information on the selected input signal.
®VOLUME
+/-
Increases or decreases the volume level
of
this unit (see
page 49).
@MUTE
Mutes the sound. Press again to restore the audio output
to
the previous volume level (see page 49).
@TV INPUT
Toggles between the input source on your TV (see
page 104).
@CH LEVEL
Adjusts the volume level
of
each channel (see page 91).
@TEST
Outputs atest tone when adjusting the output level
of
each
channel (see page 90).
@DVD playerNCR control buttons
Control your DVD player
or
VCR (see pages
105
and
106).
@My Beam microphone
Collects the test tones from this unit when using the My
Beam auto-adjust function (see page 63).
@
TV
POWER
Turns on the power
of
your TV
or
sets it to the standby
mode (see page 104).
@AVPOWER
Turns on the power
of
the selected component
or
sets it to
the standby mode (see pages
105
and
106).
®INPUT1
Switches the input source on your TV (see page
104).
@MACRO
Use to set the TV macro (see page
107).
®
/.
Switches the preset station number
(1
to 8) when this unit
is receiving an FM broadcast
or
XM channel (see
page 54).
@CAT
Switches the preset station group (A to E) when this unit is
receiving an FM broadcast
or
XM channel (see page 54).
®SLEEP
Sets the sleep timer (see page 72).
@INPUTMODE
Toggles between input modes (AUTO, DTS, and
ANALOG) (see page 93).
®l
Beam mode buttons
Change the beam mode settings (see pages 56, 62, and
63).
®
SUR.
DECODE
Selects the surround mode for playback (see page 59).
@MENU
Displays the setup menu on your TV monitor (see
pages 39 and 77).
@Operation mode selector
Selects the operation mode
of
this unit. Select YSP when
operating this unit and select TV/AV when operating your
TV or other
AV
components.
Controls
and
functions
@RETURN
Selects sleep timer settings
or
returns to the previous SET
MENU screen.
®TV VOL
+/-
Adjusts the volume level
of
your TV (see page 104).
@CH
+/-
Changes the channels
of
your
TV,
digital satellite tuner,
cable TV tuner, or VCR (see pages
104
and 106).
@TV MUTE, CODE SET
Mutes the audio output
of
your TV (see page 104).
Sets up remote control codes (see page
103).
The functions @and ®are available only when the FM/XM
stations are preset.
15
En •
Controls
and
functions
This section describes the functions
of
the remote control
used to control FM, XM Satellite Radio, or iPod when the
TV/AV mode is selected with the operation mode selector
(CD)·
16
En
CD
PRESETrrUNE
FM: Switches between the preset search mode and the
frequency search mode (see pages
51
to 54).
®Numeric buttons
FM, XM: Enter numbers.
@Cursor buttons
~
1
'V
1<ll
[>,
ENTER
FM: Use ENTRY
~
(~/'V)
to change the preset station
number
(I
to 8) or frequency level (see pages
51
to 54).
Use CAT/A-E
.~
(<l/[»
to change the preset station group
(A
to
E) (see pages 53 and 54). Use ENTER to confirm the
input above.
XM: Use ENTRY
~
(~/'V)
to select XM channels in
All Channel Search mode/Category Search mode, and to
select the preset channel number (I to 8) in Preset Search
mode. Use CAT/A-E
.~
(<l/[»
to select XM categories in
All Channel Search mode/Category Search mode, and to
select the preset channel group (A to E)
in
Preset Search
mode. Use ENTER to confirm the input above (see pages
7and 8in the Reference Guide).
,I,
0<i>~
These functions are also available when this unit is playing back
your iPod (see page 2
in
the Reference Guide).
G)
DISPLAY
XM and iPod: Displays information when this unit is
receiving an XM channel (see page
10
in the Reference
Guide) or playing back your iPod (see page 3in the
Reference Guide).
®MEMORY
FM: Stores the preset stations (see pages 52 and 53).
XM: Use to store the preset stations (see page 9in the
Reference Guide).
®SEARCH
FM: Switches between automatic and manual tuning (see
page 51).
XM: Switches between search modes (All Channel
Search, Category Search, and Preset Search) (see pages 7
and 8in the Reference Guide).
CD
Operation mode selector
Selects the operation mode
of
this unit. Select YSP when
operating this unit and select TV/AV when operating your
TV or other
AV
components.
Other manuals for YSP-4000
2
This manual suits for next models
2
Table of contents
Other Yamaha Projector manuals
Yamaha
Yamaha YSP-2200BL User manual
Yamaha
Yamaha YSP-1600 User manual
Yamaha
Yamaha LPX510 - LCD Projector - HD 720p User manual
Yamaha
Yamaha YSP-1600 User manual
Yamaha
Yamaha LPX510 - LCD Projector - HD 720p User manual
Yamaha
Yamaha DPX-530 User manual
Yamaha
Yamaha DPX-1 User manual
Yamaha
Yamaha YSP-3000SL User manual
Yamaha
Yamaha HTY-7030 User manual
Yamaha
Yamaha YSP-900BL User manual
Yamaha
Yamaha YSP 800 - Digital Sound Projector Five CH... User manual
Yamaha
Yamaha DPX-1200 User manual
Yamaha
Yamaha YSP1100SL User manual
Yamaha
Yamaha YSP 800 - Digital Sound Projector Five CH... User manual
Yamaha
Yamaha YSP-3000bl User manual
Yamaha
Yamaha DPX-530 User manual
Yamaha
Yamaha DPX-1100 User manual
Yamaha
Yamaha YSP-600 User manual
Yamaha
Yamaha YSP-3300 User manual
Yamaha
Yamaha Digital Sound Projector YSP-3000 User manual
