Yamaha PianoCraft NX-E800 User manual

YHF-397BG
Stereo Component System
The inherent advantages of 2-channel stereo are reinforced on the
YHF-397B by advanced audio engineering such as Pure Direct mode,
variable loudness control and extended frequency response.
YHT-397B Main Specifications
Receiver (RX-397B)
Minimum RMS Output Power (8 ohms, 20 Hz—20 kHz, 0.04% THD)
50W + 50W
Dynamic Power (8/6/4/2 ohms) 70 W/77 W/89 W/100 W
Damping Factor
(8 ohms, 20 Hz-20 kHz) 150 (speaker A)
Input Sensitivity/Impedance
Phono (MM) 2.5 mV/47 k-ohms
CD 50 mV/47 k-ohms
Frequency Response (Pure Direct)
10 Hz-100 kHz ±1 dB
Total Harmonic Distortion (20 Hz—20 kHz)
Phono (MM) to Record Out 0.02%
CD to Sp Out 0.02% (35 W/8 ohms)
Signal-to-Noise Ratio (Input Shorted)
[Input Shorted 5 mV] 82 dB
CD [Input Shorted 150 mV] 108 dB
Dimensions (W x H x D) 435 x 146 x 308 mm
Weight 7.4 Kg.
CD Player (CDX-397B)
Frequency Response 2 Hz-20 kHz ±0.5 dB
Harmonic Distortion + Noise 0.003% (1 kHz)
Signal-to-Noise Ratio 105 dB
Dynamic Range 95 dB
Digital Outputs 1 optical
Dimensions (W x H x D) 435 x 87 x 287 mm
Weight 3.5 kg
Speakers (NX-E800)
Woofer 13cm cone
Tweeter 2.5cm dome
Input Power (Max/Nominal) 110 W/60 W
Frequency Response 55 Hz–28 kHz
Impedance 6 ohms
Selectivity 87 dB/2.83 V/m
Dimensions (W x H x D) 186 x 300 x 223 mm
Weight 4.3 kg/unit
Convenient Operation
• Pure Direct Amplification
• Discrete Amplifier Configuration
• Linear Damping
• High Dynamic Power, Low-Impedance Drive Capability
• Numerous convenient playback functions (40-track programmable
play, random play, and A-B, single track and entire disc repeat)
• 3-mode CD Text display
• Peak search
• CD-tape synchronised record start
High Sound Quality
• Intelligent Digital Servo
• Over sampling separate DAC
• Display dimmer
• Aluminium front panel
• Speaker cabinet features a new design with innovative cross-
bracing
• 2-way bass-reflex speaker system with innovative cross bracing
Advanced Facilities
• Continuously Variable Loudness Control and
• Bass/Treble/Balance Controls (with Center Clicks)
• Remote Controllable Motor-Driven Volume Control
• Speaker A, B or A+B Selection
• 40-Station AM/FM Random Access Preset Tuning
• RoHS Compliant
Cosmetic Design
• Simply, cosmetic design concept
• Beautiful Yamaha piano finish
1
2
3
4

YHF-397BG Stereo Component System
High Quality Sound
Pure Direct Switch
When this switch is engaged, the signal
bypasses the tone, loudness, balance
controls, and other circuit, being fed
directly to the discrete power amplifier. It
travels in a straight line from the volume
control, through the high-gain short,
direct path for maximum signal purity.
Super Audio CD and DVD-Audio
Ready with Extended Frequency
Response
Rather than the usual 20Hz–20kHz
frequency response, Yamaha has given
the RX-397 the ability to handle
frequencies from 10Hz to100kHz (1dB).
Although the ear cannot hear the higher
frequencies, it has been proven that these
harmonics can affect sound reproduction
quality. Super Audio CD, DVD-Audio and
other new formats will be able to output
sound over this range, so the RX-397 is
fully compatible with products using these
formats.
Linear Damping
Level variations due to high amp
impedance tend to reduce an amplifier’s
damping factor, and frequency variations
cause it to fluctuate. This circuit cancels
the effect of these variations, maintaining
a high, stable damping factor, for superior
articulation of all sounds and better
frequency response.
High Dynamic Power, Low-
Impedance Drive Capability
The RX-397B is capable of delivering
large amounts of reserve power for
accurate reproduction of high energy
peaks. This emphasizes the music’s
dynamic qualities and provides a
sharper sound image.
Discrete Amplifier Configuration
The CDX-397 ‘s CD buffer amplifier,
volume control amplifier and power
amplifier are all constructed from carefully
selected discrete parts. This configuration
provides superior signal quality.
Intelligent Digital Servo System
Conventional tracking servo circuitry
cannot completely overcome errors
caused by disc defects, war page, dust
and so on. This system uses a
microcomputer to monitor the signal,
adjusting pickup tracking and focus, as
well as spindle motor speed, to
compensate for any problems.
Low-Impedance Power Supply
Because every signal part affects sound
quality, Yamaha uses nothing but the
best. The special Low-Impedance Power
Supply, in the CDX-397B uses extra thick
wires to ensure that power is absolutely
stable even under low impedance
conditions.
Display Dimmer
The CDX-397’s front display dimmer
function lets you dim the display when
you darken the room to suit your mood
while listening to music. The brightness of
the display can be set to Normal, Slightly
Dim and Dim. Dimming the display also
reduces any chance of noise interference
from the LCD for highest audio quality.
Aluminium Front Panel
An aluminium front panel is used to
effectively shield sensitive low-level
circuitry from external noise and
electronic radiation generated by dimmer
switches, HVAC, fluorescent lighting and
video displays (CRT, LCD, Plasma).
CD-R/RW Playback
The CDX-397B CD players can handle CD-
R and CD-RW discs with ordinary songs.
(Note that some discs may not play.)
Wealth of Playback Functions
In addition to ordinary play, there are a
variety of ways you can enjoy the musical
selections on your CDs. Random Play
plays all the songs in a random order. If
you want to hear them in a certain order,
you can use the 40-Track Program Play
function. There are also several repeat
modes: Single Track, Entire Disc, Random
Play, Programme Play and A-B (for
repeating all songs between two
points on the disc).
Auto Space Insert
Lets you add a short pause at the touch
of a button on the remote control while
recording to ensure that there is sufficient
space between selections.
3-Mode CD Text Display
Get information about the CD currently
playing right on the CD player’s display.
The 3-mode CD Text display shows the
CD’s title, the artist’s name and the title of
the track.
Peak Search
Gives you better sounding recording by
searching the disc for the loudness part
and playing it for a few seconds so you
can set the proper recording level.
Convenient Operation
CD-Tape Synchronised Record Start
You’ll have smooth recording starts each
time, because Synchronised Record Start
puts the deck into the recording mode a
few seconds before starting CD play.
RoHS Compliant
This environmentally friendly unit fully
complies with the EU’s RoHS (Restriction
of Hazardous Substances) standards.
Speaker Cabinet Has New Design
with Innovative Cross-Bracing
The cabinet is built with internal cross-
bracing having a unique wedge structure.
R-beveling reduces diffraction effects.
This type of cross braced structure is used
in top class speakers and Yamaha
engineers are able to make the most of its
advantages. It produces a tighter sound
and the increased strength cuts down
unwanted vibration.
Simply, Cosmetic Design Concept
This system provides Hi-Fi component-like
design that same dedication to sound and
design excellence is behind the creation of
the top-class component.
Beautiful Yamaha Piano Finish
Speakers
As the world’s leading piano
manufacturer, Yamaha has a long history
of woodworking expertise. The E810
speakers have the same luxurious and
environmentally friendly finish as
our grand pianos.
Other Notable Features
• Remote Control Input/Output Terminals
• Tape Monitor Switch
• 5 Audio Input Terminals with Phono
Input Terminal
• Impedance Selector (8 ohms/4ohms)
• 3-mode tape edit: random, automatic
and manual
• Skip play (Track skip)
• Direct track access and index search
• Index number display and search
• 4-mode time display
• Last memory
Speaker Design
CD/DVD
AUX
MD
Tape
Phono
Remote
Inputs
MD
Tape (Record)
Remote
Outputs
1
1
1
1
1
1
1
1
1