Yardian Pro User manual

User Guide
VERSION 1.2
Smart Sprinkler Controller with HD Camera

Table of Contents
The Yardian Installation 9
What’s in the Box 3
Overview 4
Yardian LED Indicator 5
Wi-Fi Reset Button 6
Understand Your Irrigation System 7
Step 1. Replace your old controller 10
Step 2. Install your Yardian controller 12
Step 3. Download the Yardian app 18
Step 4. Pair your Yardian to your profile 20
Step 5. Wi-Fi onboarding 22
Set-Up of the Yardian App 29
2

What’s in the Box
1. Yardian, the controller
1
2. Wi-Fi dongle
3. Labeling stickers
3
4. Wall screws and anchors
4
2
Input: 100-240VAC, 50/60Hz, Max. 0.5A
Output: 24VAC, Max. 750mA
Power
-22°F to 122°F (-30°C to 50°C)
Operating
Temperature
3

Wi-Fi dongle
Wi-Fi reset button
Terminal blocks
Product label
Warranty label
Light sensor
IR LED (night vision)
SN
MAC
YID :
AA00754F
: <MAC Number>
: <Serial Number>
H
H
G
G
A
A
B
B
C
C
D
D
E
E
F
F
I
I
LED indicator
Camera
Overview
4

1 second1 second
System
Booting Up
Initializing
Firmware Updating
(Do not turn off power)
Reboot Required
(Press Wi-Fi Reset Button until LED turns red)
Reboot Required - Action Failed
(Press Wi-Fi Reset Button until LED turns red)
Wi-Fi Station Mode
Connecting to Your Router
Connected to Your Router
Watering
Wi-Fi AP Mode (Direct Control)
Access Point Mode
Watering
Yardian LED Indicator
5

Press and hold for around 5
seconds, release when the LED
is blinking green and blue.
Wi-Fi Reset Button
Reset Wi-Fi
Press and hold for around 10
seconds, release when the LED
turns red.
Reset to factory default
SN
MAC
YID :
AA00754F
: <MAC Number>
: <Serial Number>
Press
6

Understand Your Irrigation System
PLC
Sync
RAIN
SENSOR
COM
ZONE 1
ZONE 2
ZONE 3
ZONE 4
ZONE 5
ZONE 6
ZONE 7
Common Wire
Common Wire
Valve
Valve
Valve
Controller
Sprinkler Wires
Wire from controller
to corresponding valve
Water to Zones
Master Valve
Master Valve Wire
P
C
C
C
C
Master Valve WireRain Sensor
If you have a master
valve, connect it to
any zone and specify
it in Yardian app.
P
Z2
Z3
Z4
Water
Main
7

8

Set up your Yardian in a few easy steps
The Installation
9

1
Step
Replace your
old controller
Take a picture of your current wiring. This
will help you identify the correct sequence
of wires.
10