Yasumi RF Perfect Skin User manual

USER MANUAL
RF PERFECT SKIN
MULTI-FUNCTION DEVICE FOR SKIN CARE WAVE RADIO
Thank you for purchasing.
Before using, refer to the User Manual and to retain
for future reference.
This manual contains practical hints with for demonstration
arranged for informational purposes.
The device was created for cosmetic purposes
and it is intended for home skin care. Do not use it for
medical purposes.
If you have questions or problems, please contact
customer service.

TABLE OF CONTENTS
Precautions …………………………………………………….. 3
Device features ………………………………………………… 5
Tips before surgery …………………………………………….7
Treatment programs …………………………………………… 9
Tips after surgery ……………………………………………… 11
Construction equipment ……………………………………… 12
The effects of therapy …………………………………………. 15
Operation ………………………………………………………… 16
Methodology treatments ………………………………………. 17
Cleaning and maintenance ……………………………………. 19
Charging device …………………………………………………. 20
Specification ……………………………………………………… 21
Page 2

PRECAUTIONS
1. The device is only intended for skin care. It is not
recommended to use it for other purposes.
2. You should carefully read the following Operating Instructions.
3. It is advisable to use a shorter treatment time
in the case of sensitive skin and adherence to
treatment. Otherwise, it may result in damage to the
skin.
4. Before charging device, make sure that the
wires or charging port are undamaged and
properly connected.
5. Do not use the device while charging. Once fully charged, the
device will issue an audio alert (3 beeps characteristic) and
the load indicator stops flashing will light. It is then necessary
to pull the charger contact.
6. Avoid prolonged contact with the head surface of the
skin in one place. You should constantly move over the
surface of the treatment head. Avoid movable lids and
stably cover the entire hand tool body.
7. Do not wash the unit with water or soak in water or other
substances. After the procedure, clean the printhead only
lightly moistened cotton swab.
Page 3

8. If you experience any pain or allergic reactions, stop using
the device and consult your doctor
9. When using the device, it is possible sensation of
tingling and warmth. The sensible heat can be different
depending on the condition of the skin.
10. Devices should not use: children, pregnant and
lactating women, people with allergies, people with
active skin lesions, people with pacemakers and
those with fever.
11. The device should be stored in a dry place out of reach
of children and away from sources of electromagnetic
fields (eg. Induction cooker).
12. In the event of damage to the equipment, do not
fix it yourself. In this situation, you should
immediately discontinue use and contact service.
Page 4

FUNCTIONS
1. RF - radiofrequency otherwise, it is the electromagnetic field
at a high frequency, which after penetration into the deep layers
of the skin, stimulates the dermis, collagen is heated, shrinks
the collagen fibers and regenerates them, which lightens and
tightens slack skin. In addition, it reduces wrinkles and scars,
firms the skin and gives it a glow.
2. EMS - otherwise muscle electrostimulation, is stimulation of
muscles to work with an electric pulse. This increases the
strength and muscle tone, resulting in faster fat burning.
Thanks to cooperation with the radio wave can be improved
facial contours and alleviate sagging skin.
3. CURRENT Generate current is of a certain load, which
improves the drainage of venous blood and lymph tissues,
edema and promotes the absorption of haematomas, increases
the activity of enzymes, feeds and accelerates the tissue repair
processes.
Current (+) - The head of the positive ions are generated.
this mode It enables cleansing of impurities, the reduction of
acne, elimination of spots, narrowing the pores of the skin
and mute adjustment work of the sebaceous glands. During
operation is made alkaline environment which prevents the
growth of bacteria responsible for acne. Is increased as the
absorption of nutrients which the charge is positive. Such
ingredients m. Et al .:
Page 5

zinc
calcium
niacinamide
Teleangyn®
gold
algae
Electricity (-) - The head produced ions are negative. during
operation generated is an acidic environment, which creates
ideal conditions for the proper functioning of cells
responsible for collagen and elastin production. Improving
skin firmness and elasticity, shallow minor wrinkles and
improves the shape of the face. Absorption of nutrients is
increased which the charge is negative. Such ingredients m.
Et al .:
Vitamin C, retinol
Vitamin E
hyaluronic acid
AHA, BHA and PHA
lactic acid
kojic acid arbytyna
collagen
coenzyme Q10
4. VIBRATION- relaxes muscles and decreases the tension
of blood vessels, accelerate the metabolism and
absorption of nutrients.
5. LIGHT LED - light therapy affects the proper
functioning of the whole body, stimulates regeneration
processes, accelerates metabolism, strengthens the
immulogiczny etc.
- red light (Emits a wavelength of 630 nm)
Page 6

Reaches the deep layers of the skin and activates the
collagen fibers, improves blood circulation, reduce wrinkles
and smoothes the skin. Suitable for all skin types, in
particular the signs of aging.
- light blue (Emits a wavelength of 465 nm)
It kills bacteria, soothes, reduces acne and acne scars,
shrinks pores. It has anti-inflammatory effects.
Recommended for oily skin and acne-prone
telangiectasia.
6. COOLING -For cold supports the renewal of biological
cells, and treated with cold skin becomes smooth and
firm. Cold copes well with edema arising during sleep,
so. "Bags" and puffy eyelids.
TIPS BEFORE SURGERY
1. Do not use the device in areas that in the period up to
6 months were subjected to treatments involving the
use of hyaluronic acid or collagen.
2. It should avoid the place where an artificial fillers have
been used, eg. Silicone.
3. Do not use the device in pregnant women, people with
pacemakers and patients who suffer from severe heart
disease.
4. You must remove all metal jewelry during the
procedure (eg. Earrings).
5. Clean the surface treatment facilities.
6. Do not use the device in areas that in the period up to
6 months were subjected to treatments involving the
use of hyaluronic acid or collagen.
7. It should avoid the place where an artificial fillers have
been used, eg. Silicone.
Page 7

8. Do not use the device in pregnant women, people with
pacemakers and patients who suffer from severe heart
disease.
9. You must remove all metal jewelry during the
procedure (eg. Earrings).
10. Clean the surface treatment facilities.
Page 8

TREATMENT PROGRAMS
The unit has 5 modes:
MODE BUTTON
Program
CLEAN
MOISTURE
EMS UP
RF LED
COOL
Function
RF
RF
RF
RF
COOLING
VIBRATION
VIBRATION
EMS
LIGHT
LIGHT
JON +
JON -
RED
BLUE
Icon
Page 9

Time
Program
Function
properties
recommended
preparation
And Treatment
Intensity
frequency
Heating the deep parti
Clean Fresh & Silky
skin absorption and
Powder
removal of impurities
About 5
minutes
RF
Anti-Acne Ampoule
CLEAN
difficult to remove, for
example.
2-3 times
Ion: 5
Ion +
Shine Purifying Off
blackheads, cleansing
RF: solid
Vibration
Cream
week
pores.
Purifying Biocellulose
And deep disinfection
mask
relaxation.
heating the deep
Dry Skin Ampoule
of the skin, the penetration
Hyaluronic Ampoule
About 5
minutes
Hydrating Biocellulose
RF
nutrients
mask
2-3 times
Ion: 5
MOISTURE
Ion-
the stratum corneum,
Liquid Dream Hyaluron
RF: solid
Vibration
nutrition, hydration,
week
Cream
And mineralization
Ultimate Moisture
rozświetlenieskóry
Hydrating Cream
heating the deep
Collagen Ampoule
of the skin, massage,
Anti Stop The Clock
EMS
RF
stimulation of facial muscles,
aging Serum
EMS
increase flexibility
Anti Stop The Clock
the skin, the use of the
aging Cream
neck and shoulders.
About 5 minutes
EMS: 5
2-3 times
RF: solid
week
Coenzyme Q10 Ampoule
RF
Firmoxampoule
RED LED
heating the deep
Serum STEMCELLS
Światłocz
StemCellsCream
erwone
of the skin, increasing
poliferacji fibers
StemCellsBiocelluloseM
collagen
ask
About 5 minutes
2-3 times -week
Cooling the skin,
Vitamin C Ampoule
of cooling
Red Off Intensive Care
About 5
minutes
narrowing pores,
Red Off Calming Cream
-
COOL
e
Światłoni
hydration and illumination,
Sensitive & Couperose
daily
increase flexibility
Skin Cream
ebieskie
blood vessels.
Lightening Biocellulose
mask
Page 10

AFTER TREATMENT GUIDELINES
1. The feeling of dry skin is a natural reaction after the
treatment. It should be intensely moisturize and avoid the
sun. For this purpose can be used preparations Yasumi
Liquid Dream Hyaluron Cream, Dry Skin Ampoule,
Hyaluronic Ampoule, High Protection Sun Cream SPF 30,
Calm & ProtectCream.
2. Do not wash the treatment area with hot water. For
cleaning the body, use of hot water having a
temperature of not higher than body temperature.
3. At least 2 times a week (after surgery) indicated the use of
masks, for example. Biocellulose Hydrating Mask.
Page 11

CONSTRUCTION EQUIPMENT
The kit includes:
device
charger
Cotton swabs
manual warranty
card
1. Downloading the magnetic ring of the device.
2. Imposing a cotton swab and fixing it the magnetic ring.
3. Soaking the swab active substance.
Page 12

LED lights
head with electrodes
the tool body
display
LEVEL button
MODE
charging port
page 13

intensity
battery icon Treatment program
LEVEL button - to set the intensity level.
MODE button - serves as the on / off button to change the device
and treatment programs.
ATTENTION! The device switches to standby mode for two minutes of
inactivity (the unit will sound an alert - 3 signals, and the display will
flash). In this case, turn off the unit and leave for 30 minutes or
resume treatment.
Page 14

EFFECTS OF THERAPY
Shrinking pores of the skin and firming
Reduction of the double chin, and stimulation
improvement of facial contour of collagen fibers more
flexible
and lighten the color of the face
Brighten dark eye rims reduction of
wrinkles on the neck
page 15

OPERATION
PROCEDURE STEP BY STEP
STEP 1:To turn the device on, hold the button MODE for
about 1 second until the display backlight and the beep.
STEP 2:When you start the machine automatically set
program is CLEAN. To change a program, briefly press
the MODE button.
STEP 3:Another short pressing will change the program
w the correct order CLEAN -> MOISTURE -> EMS UP ->
RF LED -> COOL.
STEP 4:To set the intensity level briefly Press LEVEL. Intensity
range is from 1 to 5.
STEP 5:To hold off urządzenienależy MODE for about 1
second until you hear a beep and the display goes out.
TIPS!
- For the RF LED COOL and you can not change the intensity.
- The temperature generated by the radio wave is constant for each program.
- The intensity should be adjusted individually to feel that there is no
discomfort, and should start with the smallest value.
- Remember to not irradiate eyeball directly.
- Better results can be achieved through the work of the so-called. "Wet
substrate." For this purpose, a treatment zone to apply the formulation of high
water content, for example. Ampoules or serum Yasumi or apply the security
ring, moistened with water and a cotton swab attached to the kit.
page 16

TREATMENT METHODS
1. make-up removal
Before performing the procedure, carefully clean the skin from
external impurities and excess sebum.
2. Preparing for surgery
Must be applied at the discretion of one of the featured pre aratów
to surgery (see table p. 7) or a cotton swab included.
3. Turn on the device and setting the Parametro
After switching on, select a treatment program and intensity.
IMPORTANT! The intensity should be selected individually from
the lowest to the feelings.
4. Performing surgery
Programs: CLEAN MOISTURE, RF LED
- Put your head gently to the skin. The print
head should be in full contact with the skin.
- Move the head along the face muscles from
inside to outside with a continuous motion at
a rate of about 2 cm / second.
- If you felt the heat is too intense need to
accelerate the movement of the head.
Remember not to hold the head in one place, to
avoid burns.
IMPORTANT! Do not use the eye. To perform the surgery on the eye,
it is advisable to use a low level of intensity due to sensitive skin.
page 17

Program: EMS UP
- Put your head gently to the skin. The print
head should be in full contact with the skin.
- A circular motion with a slight contact pressure,
do massage along the facial muscles from the
inside out. Remember to get around the larynx.
- If you felt the heat is too intense need to
accelerate the movement of the head.
Remember not to hold the head in one place,
to avoid burns.
IMPORTANT! Do not use the eye. To perform the surgery
on the eye, it is advisable to use a low level of intensity
due to sensitive skin.
Program: COOL
- Put your head gently to the skin. The print head should be in
full contact with the skin.
- Work "stęplowo", ie. Align the head in one place for about 3 seconds,
and then put in place next. After the development of the whole area of
treatment repeat this process again.
- You can hold down the head in areas exposed to
swelling, eg. The area under the eyes.
ATTENTION! In the case of ampoules Yasumi it is advisable to use additional
ultrasound gel or a cream intended for treatment of the radio wave for better
conductivity. But this is not a necessary condition.
page 18

CLEANING AND MAINTENANCE
The head and body treatment facilities must be cleaned
after each treatment with a cotton swab or a soft cloth.
Do not wash the unit under running water or immerse
in the reins.
For disinfection use a cotton swab moistened
slightly with water or without disinfecting
alcohol.
Do not use solvents, liquid metal and with a high
content of alcohol.
Do not use abrasive or metal parts cleaning device.
This may cause damage to the head.
Store in a cool, dry place out of reach of children.
Before each use, make sure that your device is
charged.
page 19