This section introduces the connection between SIP-T48S
/
T48G/T46S/T46G/T42S/T42G/T41S/T41P/T38G/T29G
/T28P/T27P/T27G/T26P
IP phones and the wireless
headset. The following figures take the SIP-T28P/T26P IP
phone as an example.
Introduction
The Wireless Headset Adapter——EHS36, is perfect for
connecting Yealink
SIP-T48S/
T48G/T46S/T46G/T42S/
T42G/T41S/T41P/T38G/T29G/T28P/T27P/T27G/T26P IP
phones and wireless headsets, such as Sennheiser/Jabra
(GN Netcom) and Plantronics headsets.
RJ9 Cord: For the audio connection between the IP phone
headset port and the
Jabra (GN Netcom)
wireless headset.
Port :Connect this port and the
Jabra(GN Netcom)
/
Sennheiser Wireless headset using the RJ45 cord.
2
Port :Connect this port and the Plantronics Wireless
headset using the 3.5 mm DC jack.
3
1
Port
:
Connect this port and the IP phone EXT/EHS
port or Expansion Module EXT port (the
expansion module has been connected to the
phone) using the RJ12 cord.
Sennheiser Y-Cord:For the audio connection between
the IP phone headset port, Wireless Headset Adapter and
the Sennheiser wireless headset.
In addition to the cords mentioned in the Port Description
section, the RJ9 Cord and the Sennheiser Y-Cord are also
provided.
3
2
1
Sennheiser Y-Cord
EHS36 User Guide www.yealink.com
EHS36
RJ45 Cord RJ12 Cord
Jabra
(GN Netcom)
wireless
headset
RJ9 Cord
RJ45 Cord RJ12 Cord
1
2
The following figure shows the connection between the IP
phone and the Jabra (GN Netcom) wireless headset.
RJ9 Cord
3.5 mm
DC Jack User Guide
Introduction
Packaging Contents
Port Description
Cord Description
Connecting IP Phone and Headset