Yealink EHS61 User manual

V1.1
Wireless Headset Adapter EHS61
User Guide
Bedienungsanleitung | Guía del usuario | Guide d'utilisateur

1
Package Contents
Verpackungsinhalt | Contenido de la caja | Contenu de la boîte
User Guide
Bedienungsanleitung
Guía del usuario
Guide d'utilisateur
EHS61
RJ9 (4 pins) to RJ9 (4 pins)
TR9-5 (8 pins) to RJ9 (4 pins)
& TR9-5 (8 pins) to RJ45 (8 pins)
RJ45 (8 pins) to RJ12 (6 pins)
Cable A
Cable B
Cable C

2
Cable A
Connect the IP Phone and Headset
Anschluss von IP-Telefon und Headset | Conecte el teléfono IP y los
auriculares | Connectez le téléphone IP et le casque
A
EHS61
Mitel & Unify Phone
Mitel & Unify IP-Telefon | Teléfono Mitel & Unify IP | Téléphone IP Mitel & Unify
Yealink WH62/WH63
Phone port
Note:
For Mitel Phones, you need to go to the phone's setup menu to enable the EHS
feature.
1. In Settings interface, press Audio->Audio Mode to select Headset or
Speaker/Headset or Headset/Speaker.
2. Return to Settings interface, press Audio->Headset to select DHSG is ON.
Hinweis:
Bei Mitel Phones müssen Sie zum Einrichtungsmenü des Telefons gehen, um die
EHS-Funktion zu aktivieren.
1. Drücken Sie in der Settings-Oberfläche Audio->Audio Mode, um Headset oder
Speaker/Headset oder Headset/Speaker.
2. Kehren Sie zur Settings-Oberfläche zurück, drücken Sie Audio->Headset, um
auszuwählen, dass DHSG is ON.
Remarque:
Pour les téléphones Mitel, vous devez accéder au menu de configuration du
téléphone pour activer la fonction EHS.
1. Dans l'interface Settings, appuyez sur Audio->Audio Mode pour sélectionner
Headset ou Speaker/Headset ou Headset/Speaker.
2. Revenez à l'interface Settings, appuyez sur Audio->Headset pour sélectionner
DHSG is ON.
Nota:
Para los teléfonos Mitel, debe ir al menú de configuración del teléfono para habilitar la
función EHS.
1. En la interfaz Settings, presione Audio->Audio Mode para seleccionar
Headset or Speaker/Headset or Headset/Speaker.
2. Regrese a la interfaz Settings, presione Audio->Headset para seleccionar
DHSG is ON.
For Unify Phones, you can plug and play.
Für Unify-Telefone können Sie Plug-and-Play verwenden.
Pour les téléphones Unify, vous pouvez brancher et jouer.
Para teléfonos Unify, puede enchufar y usar.

3
B
Yealink IP Phone
Yealink IP-Telefon | Teléfono Yealink IP | Téléphone IP Yealink
Cable B
Cable C
EHS61
Note:
For Mitel Phones, you need to go to the phone's setup menu to enable the EHS
feature.
1. In Settings interface, press Audio->Audio Mode to select Headset or
Speaker/Headset or Headset/Speaker.
2. Return to Settings interface, press Audio->Headset to select DHSG is ON.
Hinweis:
Bei Mitel Phones müssen Sie zum Einrichtungsmenü des Telefons gehen, um die
EHS-Funktion zu aktivieren.
1. Drücken Sie in der Settings-Oberfläche Audio->Audio Mode, um Headset oder
Speaker/Headset oder Headset/Speaker.
2. Kehren Sie zur Settings-Oberfläche zurück, drücken Sie Audio->Headset, um
auszuwählen, dass DHSG is ON.
Remarque:
Pour les téléphones Mitel, vous devez accéder au menu de configuration du
téléphone pour activer la fonction EHS.
1. Dans l'interface Settings, appuyez sur Audio->Audio Mode pour sélectionner
Headset ou Speaker/Headset ou Headset/Speaker.
2. Revenez à l'interface Settings, appuyez sur Audio->Headset pour sélectionner
DHSG is ON.
Nota:
Para los teléfonos Mitel, debe ir al menú de configuración del teléfono para habilitar la
función EHS.
1. En la interfaz Settings, presione Audio->Audio Mode para seleccionar
Headset or Speaker/Headset or Headset/Speaker.
2. Regrese a la interfaz Settings, presione Audio->Headset para seleccionar
DHSG is ON.
For Unify Phones, you can plug and play.
Für Unify-Telefone können Sie Plug-and-Play verwenden.
Pour les téléphones Unify, vous pouvez brancher et jouer.
Para teléfonos Unify, puede enchufar y usar.
For Yealink Phones, you can plug and play.
Für Yealink-Telefone können Sie Plug-and-Play verwenden.
Pour les téléphones Yealink, vous pouvez brancher et jouer.
Para teléfonos Yealink, puede enchufar y usar.
EHS/EXT
Yealink WH62/WH63
Phone
Phone port

4
Declaration of Conformity
DATE: 8th / October /2021
We,
YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD
Address: 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R.C
Manufacturer: YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD
Address: 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R.C
Declare that the product
Type: Wireless Headset Adapter
Model: EHS61
meets the essential requirements and other relevant provisions according to the following EC directive
Directive: 2014/30/EU
Conformity
The product complies with the following standards:
Safety: IEC 62368-1:2014
EMC: EN 55032:2015
EN 55035:2017
YEALINK (XIAMEN) NETWORK TECHNOLOGY CO.,LTD
WWW.YEALINK.COM
Directive 2011/65/EU and (EU)2015/863 of the European Parliament and of the Council of 8 June
2011 and 4 June 2015 on the restriction of the use of certain hazardous substances in electrical and
electronic equipment(RoHS 2.0)
Directive 2012/19/EU of the European Parliament and of the Council of 4.July.2012 on Waste electrical
and electronic equipment(WEEE)
Regulation (EC) No.1907/2006 of the European Parliament and of the Council of 18.December.2006
on Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH)
NAME: Huahu Wang
D
ATE: 8 / Oct /2021
TITLE: Vice President

Operating Ambient Temperatures
Operating temperature: +14 to 113°F (-10 to 45°C)
Relative humidity: 5% to 90%, noncondensing
Storage temperature: -22 to +158°F (-30 to +70°C)
Warranty
Our product warranty is limited only to the unit itself, when used normally in accordance with the operating
instructions and the system environment. We are not liable for damage or loss resulting from the use of this
product, or for any claim from a third party. We are not liable for problems with Yealink device arising from
the use of this product; we are not liable for financial damages, lost profits, claims from third parties, etc.,
arising from the use of this product.
Explanation of the symbols
DC symbol
is the DC voltage symbol.
WEEE Warning symbol
To avoid the potential effects on the environment and human health as a result of the
presence of hazardous substances in electrical and electronic equipment, end users of
electrical and electronic equipment should understand the meaning of the crossed-out
wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to
collect such WEEE separately.
Restriction of Hazardous Substances Directive (RoHS)
This device complies with the requirements of the EU RoHS Directive. Statements of compliance can be
obtained by contacting [email protected].
Safety Instructions
Save these instructions. Read these safety instructions before use!
General Requirements
Before you install and use the device, read the safety instructions carefully and observe the situation
during operation.
During the process of storage, transportation, and operation, please always keep the device dry and
clean, avoid collision and crash.
Please attempt not to dismantle the device by yourself. In case of any discrepancy, please contact
the appointed maintenance center for repair.
Please refer to the relevant laws and statutes while using the device. Legal rights of others should be
respected as well.
Environmental Requirements
Place the device at a well-ventilated place. Do not expose the device under direct sunlight.
Keep the device dry and free of dusts.
Do not place the device on or near any inflammable or fire-vulnerable object, such as
rubber-made materials.
Keep the device away from any heat source or bare fire, such as a candle or an electric heater.
Operating Requirements
Do not let a child operate the device without guidance.
Do not let a child play with the device or any accessory in case of accidental swallowing.
Please use the accessories provided or authorized by the manufacturer only.
The power supply of the device shall meet the requirements of the input voltage of the device.
Please use the provided surge protection power socket only.
Before plugging or unplugging any cable, make sure that your hands are completely dry.
Do not spill liquid of any kind on the product or use the equipment near water, for example, near
a bathtub, washbowl, kitchen sink, wet basement or near a swimming pool.
During a thunderstorm, stop using the device and disconnect it from the power supply. Unplug
the power plug and the Asymmetric Digital Subscriber Line (ADSL) twisted pair (the radio
frequency cable) to avoid lightning strike.
5
Regulatory Notices

If the device is left unused for a rather long time, disconnect it from the power supply and unplug the
power plug.
When there is smoke emitted from the device, or some abnormal noise or smell, disconnect the device
from the power supply, and unplug the power plug immediately.
Contact the specified maintenance center for repair.
Do not insert any object into equipment slots that is not part of the product or auxiliary product.
Before connecting a cable, connect the grounding cable of the device first. Do not disconnect the
grounding cable until you disconnect all other cables.
IC Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
the following two conditions:
(1) this device may not cause interference; and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device. CAN ICES-3(B) Le présent appareil est conforme aux
CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.NMB-3(B)
Contact Information
YEALINK NETWORK TECHNOLOGY CO.,LTD.
309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R.C
YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The Netherlands
YEALINK (USA) NETWORK TECHNOLOGY CO., LTD.
999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA
Made in China
6
Cleaning Requirements
Use a piece of soft, dry and anti-static cloth to clean the device.
Troubleshooting
The usage environment is out of operating temperature range.
1. Use in the operating temperature range.
The cable between the unit and the Yealink device is connected incorrectly.
1. Connect the cable correctly.
Some dust, etc., may be in the port.
1. Clean the port.
Contact your dealer or authorized service facility for any further questions.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or modifications not expressly
approved by the party responsible for compliance could void the user's authority to operate the equipment.

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.
Web: www.yealink.com
Copyright©2022 YEALINK(XIAMEN) NETWORK
TECHNOLOGY CO.,LTD. All rights reserved.
Technical Support
Visit Yealink WIKI (http://support.yealink.com/) for the latest firmware,
guides, FAQ, Product documents, and more. For better service, we
sincerely recommend you to use Yealink Ticketing system
(https://ticket.yealink.com) to submit all your technical issues.