Yealink EHS36 User manual

User Guide
www.yealink.com
The Wireless Headset Adapter is the connection between
the
T38G/ T28/T26 IP phone and the Sennheiser wireless
headset.
Sennheiser
wireless headset
RJ12 Cord
Note: The sennheiser wireless headset must be the latest firmware of the
DW-Office series (version 96 or later) !
Sennheiser Y-Cord ——EHS36
Wireless Headset Adapter
The Wireless Headset Adapter is the connection between
the
T38G/ T28/T26 IP phone and the Plantronics wireless
headset.
Plantronics
wireless headset
3.5 mm
DC Jack
RJ9 Cord
RJ12 Cord
We reserve the right to improve or change the product and the user guide without notice.
You can also download this user guide from: http://www.yealink.com/Support.aspx
Copyright 2012 YEALINK NETWORK TECHNOLOGY CO.,LTD.
c

The Wireless Headset Adapter is the connection between
the
T38G/ T28/T26 IP phone and the GN Netcom/Jabra
wireless headset.
Introduction
EHS36
RJ9 Cord RJ45 Cord
GN Netcom/Jabra
wireless headset
The Wireless Headset Adapter——EHS36, is perfect for
connecting Yealink T38G/T28/T26 IP phones and wireless
headsets, such as GN Netcom/Jabra/Sennheiser and
Plantronics headsets.
3.5 mm
DC Jack
User Guide
RJ9 Cord: For the audio connection between the IP phone
headset port and the wireless headset.
Cord Description
Connecting IP Phone and Headset
RJ9 Cord
RJ45 Cord
RJ12 Cord
Packaging Contents
RJ12 Cord
Sennheiser Y-Cord
Port Description
132
Port : Connect this port and the GN Netcom/Jabra/
Sennheiser Wireless headset using the RJ45 cord.
2
Port : Connect this port and the Plantronics Wireless
headset using the 3.5 mm DC jack.
3
1
Port : Connect this port and the IP phone EXT port or
Expansion Module port (expansion module
connected to the phone) using the RJ12 cord.
Sennheiser Y-Cord: For the connection between the IP phone
headset port, Wireless Headset Adapter and the Sennheiser
wireless headset.
In addition to the cords mentioned in the Port Description
section, the RJ9 Cord and the Sennheiser Y-Cord are also
provided.
EHS36 User Guide www.yealink.com