
USE OF PRODUCT
Power supply of pedals BC-1 from the battery type 6F-22, which
isinstalled under the bottom cover of the pedal, or from an external
sourceofstabilizedvoltage9V.
Turn on the power from the battery,when connecting the Jack
(mono only) to the input Jack, so to prolong the battery life, do not
leaveJackintheinputconnector.
ConnecttheDCadapterJack(5)orthebattery.
Connectthepedalasshown.
Turnontheamplifier.
.
Set the knobs BASS, MIDDLE, TREBLE and GAIN controls to
the middle position, the VOLUME pedal eliminate the difference
in volume when turned on and off mode. Rotate the knobs adjust
the sound you need.
Attention! Because of the particular circuitry during installation of
the three regulators BASS, MIDDLE, TREBLE and GAIN control
topositionzero,thesoundoutputwillnotpedal.
OLDIE
S R
Amplifier
BC-1
Guitar
3
Adapter 9V DC