Yescom 26FRY005-20LS User manual

Please read this manual carefully before using the product and keep this sheet for future reference.
=======================================================================
T –TEMPERATURE CONTROLLER
R –HEATING TUBE
HL1 –POWER INDICATOR (GN)
E –GROUND PROTECTION
HL2 –HEATING INDICATIOR (YE)
110V
HL1
T
L
E
HL2
R
N
Circuit Diagram
ELECTRIC FRYER
USER’S MANUAL
Troubleshooting Checklist
Issue
Possible Causes
Solutions
Indicator is not on.
1. Fuse is melt.
2. Power cord is not connected
well.
1. Change fuse.
2. Reconnect the power cord.
Red and yellow
indicators are on but
the temperature
doesn’t rise up.
1. Heating pipe is loose.
2. Electrical heating is broken.
1. Reconnect the heating
pipe.
2. Change the heating pipe.
Yellow indicator is
not off, but
temperature of the
oil is not heated up.
Thermo-controller doesn’t
work.
Change thermo-controller.
Indicator is not on
but the temperature
control is normal.
Indicator is broken.
Change indicator.
6. The basket included is used for frying food of small piece. There are two handles
on the basket and use them to put the basket in the oil when frying.
7. When the fryer is not being used, make sure the temperature controller is rotated
back to the initial place and cut off the power.
8. Before you clean the fryer, disconnect the power and filter the residues produced
during the frying first.
Page 4

Safety Cautions
1. Power voltage applied on this product should be the same with the rated voltage.
2. User should make sure the fuse is installed for the use of this product.
3. Every time before using the product, please check the power cable is well
connected.
4. The machine's power will reach to 5 kW if the two fryers are turned on at the same
time. Avoid using them with other high-power electrical appliances simultaneously
as it might cause your breaker to trip. Please make sure the electrical system of you
house and the plug strip have the capacity to stand for this power.
5. Cover is designed for keeping the oil warm and clean. But remember to avoid
burning it.
6. When operating the machine, make sure there is no water in the tank in case the hot
oil splashes.
Specifications
Name
Electric 1- Tank Fryer(1-Basket)
Model
26FRY005-20LS
Voltage
110 V
Power
2 x 2.5 kW
Temperature Range
60℃to 200℃
Overall Dimensions(LxWxH)
21 1/4” x 17 1/8” x 12 5/16”
Package Contents
Fryer x 1
Lid x 1
Frying Basket x 1
Glove x 1 pair
Operation Instructions
1. Check if the power supply is normal and safe.
2. Clean the tank and add oil until it reaches over half volume of the tank.
3. Connect the power and the green light will be on. Rotate the temperature controller
to set the temperature with the yellow light turning on and the heating pipe will
start to heat and the oil’s temperature will start to rise up.
4. When the oil’s temperature reaches to the desired degree, the thermo-controller
will cut off the electricity automatically and the heating pipe will stop heating,
meanwhile, the yellow light will turn off.
5. When the oil’s temperature becomes lower, the thermo-controller will reconnect
the electricity automatically and the heating pipe will start working again. Yellow
indicator will turn on again. The machine works in this way to keep the
temperature within a certain range.
Page 2
Page 3
Operation Panel
Temperature Controller
Green Light
Yellow Light