YESOUL V1 User manual

V1 Product Manual
Product model: YS-003
Before using this product,
carefully read
and properly keep this manual.
V1
YESOUL BIKE
YESOUL BIKE

Product Parameters
YESOUL BIKE V1
Supporting software version
Resistance system
Drive mode
Power supply
Height limit
Rated maximum load
Net weight
Gross weight
Overall dimensions
Maximum tablet width: 260mm
iOS 10.0 or higher, Android 5.0 or higher
Magnetron resistance system
Belt drive
Button battery (model: CR2477)
150~195cm
120kg
45 kg
48 kg
(Length) 1450mm x (Width) 530mm x (Height) 1300 mm
Tablet (mobile phone) holder
size

Important Safety Instructions
Please read them carefully. Improper use may result in
personal injury or death!
1.Make sure that the saddle height adjustment knob is secured correctly, and will not affect
motion during exercise.
2.Keep children and pets away from this product. This product is for those over 16 years old only.
3.Never stretch any object or body part into the openings of the bike.
4.The weight of the user must not exceed the maximum load.
5.Get off the bike until flywheel and pedals stop rotating. Otherwise, severe injuries may be
caused due to control failure.
6.If you feel any discomfort, such as dizziness or breathing difficulty, stop riding the bike and
carefully get off.
7.Never turn pedals by hand or touch any rotating mechanical part; otherwise, personal injury
may be caused.
8.Keep the body hydrated as needed during riding.
9.Use this product according to the instructions in this manual. Warm up fully before exercise.
10.Without the preliminary determination of baseline fitness level and medical certificate signed
by a doctor, never be engaged in high-speed or high-intensity sports. Before attempting any
high-intensity short sprints, pay attention to the body state and posture, and apply a
controllable speed.
11.Wear professional cycling clothes or tight-fitting sportswear and sports shoes, and tighten
foot straps to avoid injury caused by pulling or entanglement by this product.
12.Never use this product with inappropriate shoes or barefoot.
13.Incorrect or excessive training may cause injury.
14.Check whether the bike for loosening or damage before each use.
15.Never refit this bike or use non-original accessories without permission. The casing must be
opened by professionals, in order to avoid damage.
16.Those pregnant or with high blood pressure, heart disease, lumbar spondylosis or reduced
mobility must not use this product without the permission of doctors.
17.In case of any discomfort such as dizziness or chest pain during exercise, stop exercising
immediately and go to a hospital for examination.
18.If the product fails, immediately stop using it.
19.This product must not be used for medical rehabilitation.
20.Use this product on a flat and clean ground.
21.Carry out preventive maintenance regularly.
22.Never expose this product in a humid place. This product must not be used outdoor or in any
humid place.

Installation Guide - List of Parts
STEP 1: Check of parts
List of Parts
Parts List (Components List)
NO. Name
Front ground pipe
assembly
Rear ground pipe
assembly
Handle
Elastic washer
8*2.1t
Flat washer M8
(D16×d8.5×1.5t)
Hexagon socket
button head screw
M8*P1.25*16L
Screen bracket
Hexagon socket
button head screw
M8*P1.25*50L
Quantity Picture
Bottle holder
Hexagon socket
button head screw
M6*P1.0*10L
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
1
1
4
6
4
1
6
1
1
2

Installation Guide - List of Parts
Parts List (Components List)
Tablet (mobile
phone) holder
Hexagon socket
cap screwM6*P1.0*
12LM6*P1.0*12L
Pedal set left/right
Dumbbell set
(1kg/EA)
NO. Name Quantity Picture
Elastic washer
6*1.6t
Accessories List (Tools List)
Hex key
4mm/70LX25L
Hex key
5mm/100LX30L
Box-ended wrench
8/10mm
Box-ended wrench
13/14/15/17 mm
NO. Name Quantity Picture
(L) (R)
*In order to facilitate assembly, some accessories have been installed on the body before
delivery.
⑪
⑫
⑬
⑭
⑮
1
2
1
2
2
1
1
1
1
A
B
C
D

③
⑤
①
Installation Guide
STEP 2: Install ground pipes
1.Install the front ground pipe assembly ①, and tighten it with the hex key (B), as shown in the figure.
2.Lock it with two sets of hexagon socket button head screw ③ and flat washer ⑤ as shown in the
figure, make sure to lock the pipe tightly; otherwise, it may result in deformation.
3.Check and confirm the adjusting footpad is fully locked into the front ground pipe assembly .
1.Install the rear ground pipe assembly ②, and tighten it with the hex key (B), as shown in the figure.
2.Lock it with two sets of hexagon socket button head screw ③ and flat washer ⑤ as shown in the
figure, make sure to lock the pipe tightly; otherwise, it may result in deformation.
3.Check and confirm the adjusting footpad is fully locked into the rear ground pipe assembly .
③
⑤
②

⑥
④
⑦
④
⑧
⑦
Installation Guide
STEP 3: Assemble handle
Load the screen bracket ⑧ onto the fixed seat, and lock the same onto the stand column with 2 sets
of hexagon socket button head screws ⑦ and elastic washers④ via the hex key (B).
Place the handle ⑥ on the handle bracket, and lock the same with 4 sets of elastic washers ④ and
hexagon socket button head screws ⑦ via the hex key (B).

⑧
⑨
⑩
⑪
⑫
⑮
⑮
⑫
Installation Guide
STEP 4: Install bottle holder
STEP 5: Installation of tablet (mobile phone) holder
Take out the PAD (cellphone) holder ⑪, align the support on the back of the holder with the screen
bracket, lock two sets of elastic washer ⑮ and hexagon socket screw ⑫ on the bracket via the hex
key (B).
As shown in the figure, clip the bottle holder⑨ by the middle under the screen bracket ⑧, and lock
the same onto the bracket with 2 sets of Hex socket screws⑩.

R pedal assembly ⑬ L pedal assembly ⑬
Installation Guide
STEP 6: Pedal installation
Wrench (D)
Screw the pedal into the crank manually first, and
then tighten the left/right pedal assembly ⑬ with the
box-ended wrench (D). (Note: The tightening
directions for both the left pedal and the right pedal
are towards the head direction.)
Safety tips:
Reverse riding is not recommended, as it is likely to loosen pedals. After reverse riding, check
whether the pedals are locked, in order to avoid safety issues arising from loose pedals.
1.Take out the pedal assembly ⑬.
2.Pay attention to distinguish left pedal and right pedal.
3.Lock the left pedal assembly ⑬ into the left crank, and tighten with the box-ended wrench (D)
along the direction indicated by the arrow.
4.Lock the right pedal assembly ⑬ into the right crank, and tighten with the box-ended wrench (D)
along the direction indicated by the arrow.
8

STEP 7: Battery Dismantling and Installation
1.If the bike is provided with a battery, pull the insulation strip out of the gap of the battery cover
before using this product.
2.When battery replacement is required, remove the two cruciform slot screws on the electronic
control plate, and pull out the plate from the back (do not pull hard for the power cord on the back
are connected to the cycle body), remove the used battery, load the new battery into the battery
holder with the positive pole facing upwards (“+” mark facing upwards), close the cover, and tighten
the screws.
The positive pole of the
battery faces upwards
Installation Guide

Please adjust the back according to your physical condition before use;
and tighten the body fastening knob.
Installation Guide (for reference only, subject to the actual product)
Statement:
This manual contains the functional introduction and operating instructions as much as possible
when printed.
With the continuous improvement of hardware and software and optimization of design, this manual
may be inconsistent with the purchased product.
In case of any discrepancy in appearance, interface and color, the actual product shall prevail.
Safety tips:
Resistance control wrench
(Please adjust the resistance appropriately
according to your exercising needs)
Saddle tightening knob
(Adjust the saddle horizontally)
Rear column tightening knob
(Adjust the saddle height)
Front column tightening knob
(Adjust the handlebar height)
Lockable pulley
LowHigh

About APP membership
1、Newly registered users of the Chinese version of APP-Yesoul will get the membership free of charge
granted along with the bike. The number and rights of membership granted vary depending on the
models of bike. Please consult customer service personnel before purchasing the bike. (If you didn’t
receive this freebie automatically, you may get it by manually typing in the SN code: Under [My] page,
tap on Become a Member Now under the portrait to access the membership page. Tap on Redeem
Membership to the upper right, enter the SN code on your machine, and you are now a member.)
2、Registered users of the international version of APP-Yesoul Sports can get the membership free of
charge on the product membership page as indicated on the interface.
APP installation and registration
1、You can scan the QR code above to download the Chinese or international version of APP, and
register an APP account.
2、Upon registration, open the bike course in the APP. Please connect the bike according to the
interface prompts in the course for the first use. Then, once you ride the bike, the exercise mode of
the APP will be enabled or the course will be automatically accessible.
3、Before connecting the APP withbike, make sure that the Bluetooth of your mobile phone/tablet PC
has been enabled and no other devices are connected.
*Due to software upgrades, the actual product will prevail.
The S/N is at the bottom of the frame
(and also on the packing box).
Initial use (APP download)
Chinese version International version
Scan the QR code to download YESOUL APP Android/iOS mobile client
S/N CODE

How to Adjust Bike
1. Handlebar height adjustment:
Loosen, pull out and hold the front column knob with one hand, hold the middle part of the
handlebar with the other hand, and lift the handlebar to the desired position. Then release the knob,
and gently pull the column up and down until the spring is automatically reset (when a “click” sound
is heard, it means that the knob has been clamped in the hole of the column). Tighten the knob as
much as possible.
Loosen, pull out and hold the rear column knob with one hand, and lift (or press) the saddle with the
other hand to the desired position. Loosen the knob and gently pull the column up and down until
the spring is automatically reset (when a “click” sound is heard, it means that the knob has been
clamped in the hole of the column). Tighten the knob as much as possible.
2. Saddle height adjustment:
Saddle height
adjustment
Loose
Pull
Tight
Pull
Handlebar height
adjustment
Tight
Loose

How to Adjust Bike
Loosen the knob under the saddle, slide the saddle back and forth to the desired position, and
tighten the knob as much as possible.
4. Body level adjustment:
There are four adjustment pads at the bottom of the front and rear pedal tubes. Screw these pads
until they are tightly secured on the floor and the body does not shake.
3. Horizontal adjustment of saddle:
Horizontal adjustment of saddle
Tight
Loose
LowHigh

How to Determine Correct Riding Posture
1. Setup of correct saddle position
Horizontal position of saddle
Put the right foot into the clamp, and step on the pedals, until the right pedal is at 3 o’clock and
the front side of the knee joint is on the same vertical line as the pedal, that is, the saddle is in the
correct position (Fig. 3).
3 o’clock: the right
crank is parallel to floor
in the right direction
(Fig. 3)
Saddle height
Put the feet together, stand on one side of the saddle and adjust the saddle to the hip height (Fig. 1).
Then site on the saddle, and step on the pedals forcibly until they are stopped at 6 o’clock and the
leg can be fully stretched (Fig. 2).
(Fig. 1) (Fig. 2)
Hip joint Leg straight

How to Determine Correct Riding Posture
3. Handle position layout of bike
During riding, coaches will show the corresponding hand positions, i.e. the
corresponding parts of the handlebar, as shown below.
Hand position 1
1
Hand position 2
2
Hand position 3
3
2. Setup of appropriate handlebar height
Each user can set up the appropriate handlebar height based on his or her body height and riding
experience.
Recommendation: The handlebar should be slightly higher than the saddle for new users (Fig. 1) and
flush with or slightly lower than the saddle for experienced users (Fig. 2).
Users subject to lumbar muscle strain and lumbar spondylosis may ride the bike with the consent of
doctors. It is recommended to adjust the handlebar into a higher position.
(Fig. 1) (Fig. 2)
3
3
2
1
2
1

Routine Maintenance
Daily use:
Keep the bike on a dry, ventilated and flat floor. If not used in a long time, the bike should be
covered to keep its body clean and tidy.
Frame maintenance:
Wipe off sweat on the frame with cloth after exercise. Do not wipe the bike with wet cloth, in order to
avoid rusting.
Belt maintenance:
Check the belt pulley for cracking and deviation, and adjust or replace the belt in time. Regularly
clean the belt groove to prevent the belt from jumping out of the groove.
Inspection of body screws:
Always check the screws of all body parts for loosening or falling, and tighten or replace them in
time.
Inspection of resistance adjustment knob:
Always check the resistance adjustment knob for loosening or falling. Check whether the resistance
is reasonable, so as to calibrate resistance in time.
Inspection of pedals and cranks:
Always check the screws of pedals and cranks for loosening, and tighten them in time.
Saddle maintenance:
Always check whether the saddle is loose and tighten it in time. Wipe the saddle with cotton cloth to
keep it dry.

Modelo del producto: YS-003
V1
Bicicleta
Antes de usar el producto,
por favor, lea detenidamente
el manual de las instrucciones,
y guárdelo bien.
Manual de instrucciones
del producto VI
Bicicleta YESOUL
Escanee el código para ver
el vídeo de instalación

Dimensiones para el soporte
de la tableta (móvil)
Versiones disponibles de software
Sistema de resistencia
Modo de transmisión
Fuente de alimentación
Límite de altura
Carga máxima nominal
Peso neto
Peso bruto
Dimensiones del espacio
La anchura máxima para disponer la tableta consiste en 260mm
Versiones superiores a iOS 10.0, las superiores a Android 5.0
(con las mismas incluidas)
Sistema de resistencia de magnetrón
Transmisión en correa
Pila de botón (Modelo: CR2477)
150 ～ 195cm
120kg
45kg
48kg
1450mm (largo) × 530mm (ancho) × 1300mm (alto)
Bicicleta YESOUL VI
Parámetros del producto

Instrucciones de seguridad importantes
Por favor léalas detenidamente. ¡El uso inadecuado
puede causar lesiones personales o muerte!
1.Asegúrese de que esté fijada correctamente la perilla que ajusta la altura del sillín y no afecte al alcance de
movimiento durante el ejercicio.
2.Aleje a los niños y mascotas del producto, que está diseñado solo para las personas mayores de 16 años.
3.No ponga ningún objeto o parte del cuerpo en cualquier abertura de la bicicleta.
4.El peso del usuario no debe superar la capacidad de carga máxima.
5.Debe esperar a que el volante y los pedales dejen de girar antes de salir del vehículo, de no hacerlo puede
perder el control y sufrir lesiones graves.
6.Para cualquier inconveniencia en su cuerpo, como mareos o dificultad de respirar, deje usted de pisarlos
gradualmente y bájese de la bicicleta con cuidado.
7.No gire los pedales manualmente. No toque ningún dispositivo mecánico que está girando, en caso
contrario, podría causar lesiones físicas.
8.Mantenga el cuerpo hidratado durante todo el ciclismo cuando sea necesario.
9.Utilice el equipo según las instrucciones del manual, y caliente plenamente antes de empezar los ejercicios.
10.No haga ejercicios a mayor velocidad e intensidad cuando no se determine de forma preliminar el nivel de
condición física inicial ni haya obtenido el certificado médico de conformidad de examen físico. Preste
atención primero al estado físico y postura estableciendo una velocidad que se puede controlar antes de
intentar cualquier sprint a distancia corta de alta intensidad.
11.Lleve puesta ropa de ciclismo profesional o la deportiva ajustada con deportivas apretando la cubierta de
los pies, con el fin de evitar dejarse arrastrado e involucrado por el equipo por lo cual podría causar lesiones
deportivas.
12.No use el producto sin llevar zapatos apropiados, ni lo use descalzo.
13.El entrenamiento incorrecto o excesivo podría causar lesiones.
14.Verifique la bicicleta si algo está suelto o roto cada vez antes de usarla.
15.No modifique la bicicleta sin permiso previo ni utilice accesorios no originales. Que los no profesionales
no abran la cubierta para no romper el equipo.
16.Utilice la bicicleta una vez obtenida la autorización previa del médico si usted es paciente con
hipertensión, de enfermedades del corazón, espondilosis lumbar, mujer embaraza, persona con actividad
limitada, etc.
17.Deje el ejercicio de inmediato y ve al médico para un examen físico cuando sienta mareos, dolor en el
pecho y otros síntomas de malestar durante el ejercicio.
18.En caso de avería, deje de usar el producto inmediatamente.
19.No se puede utilizar el producto para efectos de rehabilitación médica.
20.Utilice el producto en el suelo plano y limpio.
21.Efectúe mantenimiento preventivo periódicamente.
22.No exponga el producto a un entorno húmedo. No es apropiado usar el producto al aire libre ni en ningún
entorno húmedo.