YESOUL MP1 User manual

MP1
YESOUL MINI BIKE
Before using this product,
carefully read and
properly keep this manual.
Product model: YS-CMP1
Item NO. :MP1
YESOUL MINI BIKE
MP1 Product Manual

1
0
SPECIFICATIONS

2
LIST OF SPARE PARTS
Failure to observe these warnings could result in
physical injury or damage to the device.
Use the device indoors on a level surface. Keep the device away from
moisture and dust.
Make sure that the pedals are on tight. Loose pedals will slowly come
undone. Using the bike with loose pedals can damage the threads
on the crank arms.
The device has sealed bearings and is maintenance free. Lubricants are
not necessary and can actually damage the bike.
Do not
place the bike in a location where it will be in contact with direct
sunlight or where it will be exposed to high temperatures or excessive humidity.
Do not stand on the pedals. The device was not designed to be used while
standing.
The exerciser won’t come with batteries, please purchase one batteries
by yourself. (The battery model: AAA( NO.7) battery 1.5V *1)
LIST OF PARTS
NO. Description Quantity
1
Front stabilizer
1
2 Rear stabilizer 1
3
Left pedal
1
4 Right pedal 1
5
6 Display 1
7
Main body
Screw
Spanner
PRECAUTIONS
8
1
4
1

3 3
Step 2
Step 1
Assemble the rear stabilizer (2) with main body (1)
by screw (7) and spanner(8).
Assamble the front stabilizer (3) with the main body(1)
by screw(7) and spanner(8).

4
Step 3
Step 4
When installing Parts 4 and part5,
Please use the spanner to turn the
pedals in the same direction.
Note: The pedals must be locked.
Connect the electronic watch as
shown in the figure on the right
and then connect the induction wires.
Note: Do not connect the wires with great force.
Safety tips:
Reverse riding is not recommended, as it is likely to loosen pedals.
After reverse riding, check whether the pedals are locked,
in order to avoid safety issues arising from loose pedals.

5
Step 5
MODE
(Press this key to select and lock the
specific functions required. Long press
this key for 4 seconds to clear all
readings.)
RESET
(Press this key to reset the target value.)
TIME
(Total time pedaled)
SPD
(Kilometers per hour)
DIST
(Total distance pedaled, in miles)
SCAN
(Display all functional readings in turn)
CAL
(Total calories burned)
SCAN:
Press the MODE key until the pointer points to SCAN and flashes, automatically displaying all
functional readings in turn.
TIME:
Display the current movement time, which can be timed forward, or countdown (when setting the
target value, which can be counted down). Display range: 00:00 -- 99:59 minutes: seconds.
SPD:
Display current speed display range: 0.0-999. 9 km/h.
DIST:
Display the current moving distance, which can be accumulated or accumulated backwards
(when setting the target value, it can be accumulated backwards). Display range: 0-99.99km. 4
DISPLAY INSTRUCTION
T n
CAL:
Show that the energy consumed by the current exercise can be accumulated positively
or backwards (when setting the target value, this CALORIE can be accumulated backwards).
The range of this CA LORIE is 0-999. 9 kcal.
ODO :
.snur doirep yticapac yrettab morf ot srefer si noitcnuf siht hcihw ecnatsid latot ehT
The Function Button
If you need to replace the battery,
please open the battery cover,
take out the old battery, and then
insert a new battery into the battery slot.

6
REMARK
Adjustable Tension Control
1. When the movement stops and there is no button operation within4 minutes, the display
will automatically close.
2. When pedal exerciser has a sense of exercise or press any key, the electronic watch will
automatically open.
3. If this is the first time to use， and the display shows any abnormality, please reinstall the battery.
4. If this is the first time to use, and the electronic table does not function to display, please
reconnect the lines.
5. This display is applicable to AAA( NO.7) battery 1.5V *1. If after a long time of use, the electronic
table display brightness from strong to weak, or no display, please replace the new battery in time
Magnetic resistance system makes pedal motion smooth and quiet. Level 8 tension can be
adjusted from low to high to meet the requirements of different intensity of exercise.
1. Warm up：1,2
2. Rehabilitation exercise：3,4
3. Improve endurance：5,6
4. Stabilizing muscle：7,8