Yongse Y641 User manual

LED Bluetooth speaker
LED蓝牙音箱
Y641

Thank you for buying our product, you can use this speaker to stream
music from smartphone, tablet, PC or Mac through Bluetooth. Please
read this manual before use and retain it for future reference.
“The word mark and logos are registered trademarks
owned by Bluetooth
SIG, Inc. and any use of such marks by
LOGO is under license. Other trademarks and trade names are
those of their respecve owners.”
Bluetooth
®

Controls And Indicators
“The word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
LOGO is under license. Other trademarks and trade names are
those of their respecve owners.”
ON/OFF light ( ) ON/OFF Bluetooth ( ) ON/OFF Bluetooth pairing ( )
Micro USB Line in

Controls And Indicators
ON/OFF light buon
Change the brightness
intensity(Enhance/ weaken)
Red color buon
Green color buon
Blue color buon
Purple color buon
Lightgreen color buon
Cyan color buon
So/warm candle color
White color

Controls And Indicators
ON/OFF speaker buon
Play/Pause buon
Track buon Lower/Raise volume
Press and hold to begin connecng a Bluetooth device
Eight individual colors display one by one automacally
Winkling one color showed before press this buon
Red, Blue and Green color scrolling automacally
Six colors scrolling automacally and gradually change
The switch from Bluetooth Mode to Lin-in Mode
The light is rhythmic beang to follow the music

Controls and indicators（3）:
Press the buon “ ” over 2 seconds on the speaker or press
the buon “ ” on the remote control to turn on the Bluetooth
mode, the Bluetooth indicator slowly blinks blue and the speaker
emits a tone.
With your device and LED speaker both turned on, press the
buon “ ” to make the speaker discoverable or press the
buon “ ” over 3 seconds. The Bluetooth indicator quickly
blinks blue and the speaker emits a tone.
Set your Bluetooth device to be discoverable so it can discover
(detect) the LED BLUETOOTH SPEAKER. Locate the Bluetooth
device list in the user interface of your device.
Press the buon “ ” over 2 seconds on the speaker or press
Press the buon “ ” over 2 seconds on the speaker or press
Press the buon “ ” over 2 seconds on the speaker or press
Press the buon “ ” over 2 seconds on the speaker or press
Press the buon “ ” over 2 seconds on the speaker or press
Press the buon “ ” over 2 seconds on the speaker or press
Press the buon “ ” over 2 seconds on the speaker or press
Press the buon “ ” over 2 seconds on the speaker or press
buon “ ” over 3 seconds. The
buon “ ” over 3 seconds. The
buon “ ” over 3 seconds. The
buon “ ” over 3 seconds. The
buon “ ” over 3 seconds. The
buon “ ” over 3 seconds. The
buon “ ” over 3 seconds. The
From the Bluetooth device list, select the device named “Y640”.
Press it and the speaker emits a tone. When Bluetooth indicator
keeps light, Bluetooth pairing is complete.
Automacally playing with beang light under the Bluetooth
mode.
Light and play can be separately working.
Bluetooth Mode

Controls and indicators（3）:
If you are unable to play your device at any situaon, press the
buon to turn the LED BLUETOOTH SPEAKER on again and recon-
nect, or power-on reset.
Press the buon “ ”. The speaker is in the mode of line in when
you hear the voice of “line in” from the speaker.
Note:
Line in Mode

Charging
Suggest to put on the cap well when charging has completed,
especially in the rainy day.
Low-baery warning: Auto OFF aer red light is flashing for 10
seconds
Note:
Under charging, the indicator is on red. Indicator does not light when
the charging complete (Charging is full).
Under Charging Full Charging
Under Charging

Operaon Reminder
Suggest use the speaker on the balcony, garden, party on-site, Bar,
or other outdoors.
On the sunshine and rainwater or very low temperature, do not
expose the speaker for a long me. Suggest take it back to indoor to
increase the service lifeme.
Power-on reset:Reset one me for Power-ON/OFF
To smoothly control the LED BLUETOOTH SPEAKER by remote
control, do not have any objects (grass, stool, etc. ) on the locaon of
showed picture as follows:
Receiver of remote control

Technical Data
Adapter: Input 100-240AC Output 5V/1A
RGB LED
Baery: 4400mAH
Working me: 30 hours (LED Flashing mode only);
12 hours (Music mode only)
Charging me: 8-10H
Bluetooth: Bluetooth 3.0
Bluetooth range 10M