York FC Quick start guide

ADD - ON COILS
FOR USE WITH SPLIT-SYSTEM
COOLING & HEAT PUMPS
MODELS: MC, PC, FC, HD, HC, UC
600 - 2000 CFM 1.5 - 5 TON COILS
Du to continuous product improv m nt, sp cifications
ar subj ct to chang without notic .
Visit us on th w b at www.york.com for th most
up-to-dat t chnical information.
Additional rating information can b found at
www.ariprim n t.org.
HORIZONTAL CASED
HC
FULL CASED
MULTI-POSITION
MC
UPFLOW
PARTIAL CASED
PC
HORIZONTAL
DUCT
HD
UPFLOW UNCASED
UC
UPFLOW/DOWNFLOW
FULL CASED
FC
ISO 9001
Certified Quality
Management System
258931-BTG-A-0606
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
TECHNICAL
GUIDE
TECHNICAL
GUIDE
DESCRIPTION
These coo ing and heat pump coi s are designed to be insta ed with
UPG furnaces and to be matched with UPG coo ing and heat pump
outdoor units. A UPG coi s uti ize a TXV to provide our customers
with the optimum performance and refrigerant contro required for
13+ SEER systems. Coi s can be ordered with a R22 TXV factory
insta ed that can be easi y converted to R410A by changing the bo t-
on TXV.
“Fl x-coils” are a so avai ab e without a factory insta ed metering
device. For added app ication f exibi ity a R22 or R410A TXV is
insta ed, on “Fl x-coils”, in the fie d to meet your refrigerant choice.
Upflow/Downflow Coils Full Cas d and Partial Cas d
Coils – Designed for high-efficiency to match any system, fu cased
in the upf ow or downf ow and the partia cased in the upf ow on y
app ication .
Multi-Position Coils - Designed for high-efficiency ike the
upf ow/downf ow coi but with the added f exibi ity that a ows it to be
insta ed any position, upf ow, downf ow, horizonta right or eft. This
coi can be easi y app ied to our furnace and modu ar air hand er in
any configuration.
Horizontal Duct Coils - Avai ab e for both coo ing and heat pump
dedicated horizonta , s ab coi , app ications. Fie d transition may be
required .
D dicat d Horizontal Cas d Coils – These coi s are coo ing
on y or heat pump approved for horizonta furnace or modu ar air
hand er app ications. Un ike the horizonta duct coi s these cased
coi s match the dimensions of the furnace or modu ar b ower .
FEATURES
Th rmal Expansion Valv - Provides f exibi ity to convert any
coi to R22 or R410A refrigerant. A true bo t-on TXV, va ve assemb y
and equa izer tube are bo t-on, no brazing required. TXV and sens-
ing bu b are mounted inside the cased coi cabinet. (Must be fie d
supp ied for a “F ex-coi s”)
MicroBlu ™ Coat d Fins - A coi s are treated with a
MicroBlu ™ Hydrophi ic coating to enhance the remova of conden-
sate during the refrigeration cyc e and reduce the possibi ity of water
b ow-off. The MicroBlu ™ coating a so reduces the growth of germ
causing microbes.
Insulat d Cabin t - A evaporator coi cabinets are therma y
insu ated with foi faced insu ation to prevent sweatin g.
Int rnally Cl an - A evaporator coi s are factory eak-tested,
dehydrated, sea ed and shipped with a ho ding charge. The suction
and iquid ines are sea ed with rubber p ugs, no cutting of connection
stubs to attach ine set .
Durabl Finish Insid and Out - Coi casings are made of pre-
painted stee . The pre-treated f at ga vanized stee provides a better
paint to stee bond, which resists corrosion and rust creep. A inter-
na meta parts are made of G90 pre-painted stee i.e. triangu ar
p ates, top p ates, horizonta supports etc. (Coi header p ates are
non-painted due to the brazing process during production.)
Optimum H at Transf r - Using the atest in heat transfer tech-
no ogy, staggered rows of copper tubes are mechanica y expanded
into a uminum fins to provide optimum air to surface contact for
amp e moisture remova as we as high performance ratings.
ACCESSORIES
Refer to Price Manua for specific mode numbers.
TXV Kits - Therma expansion va ve kits are avai ab e for “F ex-coi ”
app ications and converting R22 to R410A refrigerant or as a service
rep acement. A TXV kits are non-braze , a connections are bo t-on
inc uding the va ve assemb y and equa izer tube. (No orifice or any
other metering device is to used in conjunction with the TXV).
Coil Casing Without Coil – Coi casings are avai ab e in each
width that can be insta ed with the furnace or modu ar air hand er
during initia insta ation. This option is avai ab e to a ow the insta er
the f exibi ity to insta the coi at a ater date without duct modifica-
tions.

258931-BTG-A-0606
2 Unitary Products Group
COOLING CAPACITY - Coil Only
*
Mod l Rat d
CFM
Ent ring
Air °F
(W t Bulb)
MBH @ Evaporator T mp ratur and Corr sponding Pr ssur °F / PSIG
35 / 61.5 40 / 68.5 45 / 76.0 50 / 84.0
UPFLOW "A" TYPE
FC18A
PC18A 675
72 25.3 23.1 20.6 17.9
67 23.4 21.1 18.7 16.1
62 19.2 12.0 18.7 12.4
57 15.6 13.5 11.3 8.8
FC18B
PC18B 850
72 28.1 25.7 22.9 19.9
67 26.0 23.5 20.8 17.9
62 21.3 18.9 16.4 13.7
57 17.3 15.0 12.6 9.8
FC24A
PC24A 675
72 35.6 32.5 29.0 25.2
67 32.9 29.7 26.3 22.7
62 27.0 23.9 20.7 17.4
57 21.9 19.0 15.9 12.4
FC24B
PC24B 850
72 35.6 32.5 29.0 25.2
67 32.9 29.7 26.3 22.7
62 27.0 23.9 20.7 17.4
57 21.9 19.0 15.9 12.4
FC30A
PC30A
FC30B
PC30B
1025
72 38.9 35.4 31.6 27.6
67 33.9 30.3 26.8 23.0
62 27.3 23.7 22.5 18.0
57 22.6 20.1 17.5 14.8
FC35B
PC35B
FC35C
PC35C
1025
72 46.1 41.9 37.4 33.0
67 36.9 32.6 28.6 24.3
62 28.9 24.2 26.4 19.7
57 24.7 22.9 21.1 19.7
FC36A
PC36A 1150
72 46.0 41.9 37.4 32.9
67 36.8 32.5 28.5 24.2
62 28.8 24.1 26.4 19.6
57 24.7 22.9 21.1 19.6
FC36B
PC36B
FC36C
PC36C
1250
72 51.1 46.5 41.5 36.6
67 40.9 36.1 31.7 26.9
62 32.0 26.8 29.3 21.8
57 27.4 25.4 23.4 21.8
FC42B
PC42B
FC42C
PC42C
1400
72 86.6 74.5 62.0 49.0
67 69.4 58.2 47.4 36.3
62 54.1 43.0 35.1 29.3
57 46.5 40.7 35.1 29.3
FC48C
PC48C 1620
72 99.4 85.5 71.2 56.2
67 79.6 66.8 54.4 41.6
62 62.1 49.4 40.2 33.7
57 53.3 46.7 40.2 33.7
FC60C
PC60C
FC60D
PC60D
1850
72 118.7 100.0 81.1 61.5
67 95.0 78.4 61.9 45.4
62 74.0 58.0 45.7 36.7
57 63.6 54.8 45.7 36.7
* - See Condensing Unit or Heat Pump Technica Guide for Tota Coo ing Capacity and Sensib e Capacity.

258931-BTG-A-0606
Unitary Products Group 3
COOLING CAPACITY - COIL ONLY
*
Mod l Coil Rat d CFM Ent ring Air °F
(W t Bulb)
MBH@ Evaporator T mp ratur and Corr sponding Pr ssur °F / PSIG
35 / 61.5 40 / 68.5 45 / 76.0 50 / 84.0
FULL-CASED “A” TYPE MULTI-POSITION
MC18A 550
72 25.8 23.5 21.0 18.2
67 23.7 21.5 19.0 16.4
62 19.5 17.3 14.9 12.6
57 15.8 13.5 11.5 9.0
MC18B 650
72 28.7 26.1 23.3 20.2
67 26.4 23.9 21.1 18.2
62 21.6 19.2 16.6 14.0
57 17.5 15.2 12.8 10.0
MC24A
MC24B 850
72 36.3 33.0 29.5 25.6
67 33.4 30.2 26.7 23.1
62 27.4 24.3 21.0 17.7
57 22.2 19.3 16.2 12.6
MC30A
MC30B 1025
72 41.5 37.8 33.7 29.5
67 36.2 32.4 28.6 24.5
62 29.1 25.3 24.0 19.2
57 24.1 21.5 18.7 15.8
MC35B
MC35C 1025
72 46.9 42.7 38.2 33.6
67 37.6 33.2 29.1 24.7
62 29.3 24.6 26.9 20.0
57 25.2 23.3 21.5 20.0
MC36A 1150
72 46.8 42.6 38.1 33.6
67 37.5 33.1 29.1 24.7
62 29.3 24.6 26.8 20.0
57 25.1 23.2 21.4 20.0
MC36B 1250
72 52.0 47.3 42.3 37.3
67 41.7 36.8 32.3 27.4
62 32.5 27.3 29.8 22.2
57 27.9 25.8 23.8 22.2
MC36C 1250
72 53.4 48.6 43.4 38.3
67 42.8 37.8 33.1 28.2
62 33.4 28.1 30.6 22.8
57 28.7 26.5 24.5 22.8
MC42B
MC42C 1400
72 88.4 76.0 63.3 50.0
67 70.8 59.4 48.4 37.0
62 55.2 43.9 35.8 29.9
57 47.4 41.5 35.8 29.9
MC48C
MC48D 1650
72 100.5 86.4 72.0 56.8
67 80.4 67.5 55.0 42.1
62 62.7 49.9 40.7 34.0
57 53.9 47.2 40.7 34.0
MC60D 1825
72 119.9 101.0 80.0 62.2
67 96.0 79.2 62.6 45.8
62 74.8 58.6 46.2 37.0
57 64.3 55.4 46.2 37.0
MC61D 2000
72 124.8 105.2 85.3 64.7
67 99.9 82.5 65.2 47.7
62 77.9 61.1 48.1 38.6
57 66.9 57.7 48.1 38.6
* See Condensing Unit or Heat Pump Technica Guide for Tota Coo ing Capacity and Sensib e Capacity.

258931-BTG-A-0606
4 Unitary Products Group
Notes:
• MC coi s avai ab e with a factory insta ed horizonta drain pan option (H).
COOLING CAPACITY - Coil Only
*
MODEL RATED
CFM
ENTERING
AIR °F
(W t Bulb)
MBH @ Evaporator T mp ratur and Corr sponding Pr ssur °F/ PSIG
35 / 61.5 40 / 68.5 45 / 76.0 50 / 84.0
HORIZONTAL DUCT TYPE
HD24A 815
72 35.3 32.4 28.7 24.9
67 32.6 29.4 26.0 22.5
62 26.7 23.7 20.5 17.2
57 21.7 18.8 15.7 12.3
HD36B 1192
72 57.9 52.7 47.1 41.5
67 46.4 41.1 35.9 30.4
62 36.2 30.4 26.5 24.7
57 31.1 28.7 26.5 24.7
HD48C 1610
72 83.4 71.7 59.7 47.1
67 66.8 56.1 45.6 34.9
62 52.1 41.5 33.7 28.3
57 44.7 39.2 33.7 28.3
HD60D 2100
72 133.0 112.4 90.9 69.2
67 106.5 87.9 69.4 50.0
62 83.0 65.0 51.3 41.1
57 71.2 61.4 51.3 41.1
* See Condensing Unit or Heat Pump Technica Guide for Tota Coo ing Capacity and Sensib e Capacity.
COOLING CAPACITY - COIL ONLY
*
Mod l Rat d
CFM
Ent ring Air °F
(W t Bulb)
MBH @ EVAPORATOR TEMPERATURE AND
CORRESPONDING PRESSURE °F / PSIG
35/61.5 40/68.5 45/76.0 50/84.0
HC18A 600
72 26.4 24.0 21.5 18.6
67 24.3 22.0 19.4 16.8
62 20.0 17.7 15.3 12.9
57 16.1 14.0 11.8 9.2
HC30A 1000
72 42.7 38.9 34.7 30.6
67 34.3 30.3 26.5 22.5
62 26.7 22.5 24.5 19.8
57 22.9 21.2 19.6 18.3
HC36B 1200
72 73.4 63.1 52.5 41.5
67 58.8 49.3 40.2 30.7
62 45.8 36.4 29.7 24.8
57 39.3 34.4 28.1 23.2
HC42C 1400
72 84.9 73.0 60.1 48.1
67 68.0 58.9 46.5 35.6
62 53.1 42.2 34.4 28.8
57 45.5 40.0 32.0 26.7
HC60C 1800
72 112.8 95.0 77.0 58.4
67 90.3 74.5 58.8 43.1
62 70.3 55.1 43.4 34.9
57 60.4 52.1 40.4 31.9
* See Condensing Unit or Heat Pump Technica Guide for Tota Coo ing Capacity and Sensib e Capacity.

258931-BTG-A-0606
Unitary Products Group 5
NOTE:Do not exceed minimum/maximum CFM imits shown under Air
F ow Data.
APPLICATION LIMITATIONS
These units must be insta ed in accordance with a nationa and
oca safety codes.
Air f ow must be within the minimum and maximum imits approved
for e ectric heat, evaporator coi s and outdoor units.
COOLING CAPACITY - COIL ONLY
*
Mod l Coil Rat d CFM Ent ring Air °F (W t Bulb) MBH@ Evaporator T mp ratur and Corr sponding Pr ssur °F / PSIG
35 / 61.5 40 / 68.5 45 / 76.0 50 / 84.0
uncas d upflow
UC18A
UC18B 60
72 23.3 21.3 19.0 17.5
67 21.5 19.5 17.3 14.9
62 17.7 15.6 13.5 11.4
57 14.4 12.4 10.4 8.0
UC24A
UC24B 800
72 27.4 25.0 22.3 19.4
67 25.3 22.9 20.3 17.5
62 20.8 18.4 15.9 13.4
57 16.9 14.6 12.2 9.4
UC30A
UC30B 1000
72 35.2 32.0 28.6 24.8
67 32.4 28.6 25.3 21.9
62 26.6 23.6 21.5 18.7
57 25.2 22.7 20.2 17.6
UC36A 1150
72 46.8 42.7 37.9 33.0
67 43.1 39.2 34.9 30.4
62 35.3 32.1 28.6 24.9
57 33.3 26.9 26.9 23.4
UC36B
UC36C 1200
72 49.3 44.9 39.9 34.7
67 45.4 41.3 36.7 32.0
62 37.2 33.8 30.1 26.2
57 35.0 28.3 28.3 24.6
UC42B
UC42C 1400
72 86.7 73.0 59.2 44.9
67 69.4 57.2 45.2 33.1
62 54.0 42.3 33.4 26.8
57 46.4 40.0 33.4 26.8
UC48C
UC48D 1600
72 62.4 56.8 50.5 44.4
67 57.4 53.2 46.5 40.5
62 47.1 42.8 38.1 33.2
57 44.3 40.3 35.8 31.2
UC60C
UC60D 1800
72 95.4 82.1 68.4 54.0
67 76.4 64.1 52.2 39.9
62 59.6 47.4 38.6 32.4
57 51.2 44.8 38.6 32.4
* See Condensing Unit or Heat Pump Technica Guide for Tota Coo ing Capacity and Sensib e Capacity.
APPLICATION FACTOR-RATED CFM VS. ACTUAL CFM
% OF RATED AIR FLOW 80% 90% RATED CFM 110% 120%
CAPACITY FACTOR 0.96 0.98 1.00 1.02 1.03
Ent ring Air T mp ratur Limits
W t Bulb T mp. ºF Dry Bulb T mp. ºF
Min. Max. Min. Max.
57 72 65 95

258931-BTG-A-0606
6 Unitary Products Group
STATIC PRESSURE VS. AIRFLOW (BASED ON WET COIL)
UPFLOW CASED "A" TYPE
Mod l Airflow W t Coil
FC18A
PC18A
600 0.16
800 0.23
1000 0.30
FC18B
PC18B
600 0.14
800 0.20
1000 0.26
FC24A
PC24A
600 0.15
800 0.21
1000 0.27
FC24B
PC24B
600 0.13
800 0.18
1000 0.23
FC30A
PC30A
800 0.21
1000 0.27
1200 0.33
FC30B
PC30B
800 0.18
1000 0.23
1200 0.29
FC35B
PC35B
800 0.16
1000 0.22
1200 0.29
FC35C
PC35C
800 0.14
1000 0.20
1200 0.27
FC36A
PC36A
1000 0.24
1200 0.32
1400 0.40
FC36B
PC36B
1000 0.15
1200 0.22
1400 0.28
FC36C
PC36C
1000 0.10
1200 0.15
1400 0.20
FC42B
PC42B
1200 0.21
1400 0.28
1600 0.34
1800 0.40
FC42C
PC42C
1200 0.14
1400 0.19
1600 0.24
1800 0.28
FC48C
PC48C
1600 0.29
1800 0.35
2000 0.40
2200 0.46
FC48D
PC48D
1600 0.25
1800 0.30
2000 0.35
2200 0.40
FC60C
PC60C
1600 0.28
1800 0.33
2000 0.38
2200 0.43
FC60D
PC60D
1600 0.21
1800 0.27
2000 0.32
2200 0.38
HORIZONTAL - DUCT TYPE
Mod l Airflow W t Coil
HD24A
600 0.02
800 0.09
1000 0.19
HD36B
1000 0.19
1200 0.28
1400 0.38
HD48C
1200 0.14
1400 0.19
1600 0.25
1800 0.32
HD60D
1600 0.16
1800 0.20
2000 0.25
2200 0.30
HORIZONTAL CASED
Mod l Airflow W t Coil
HC18A
600 0.07
800 0.12
1000 0.19
HC30A
800 0.21
900 0.25
1150 0.30
1200 0.31
HC36B
1000 0.20
1100 0.24
1200 0.27
1300 0.30
HC42C
1400 0.25
1500 0.28
1550 0.30
1600 0.33
HC60C
1700 0.25
1800 0.28
1850 0.30
1900 0.31
2000 0.34

258931-BTG-A-0606
Unitary Products Group 7
CASED "A" TYPE MULTI-POSITION
Mod l Airflow W t Coil
MC18A
600 0.22
800 0.29
1000 0.36
MC18B
600 0.20
800 0.26
1000 0.32
MC24A
600 0.21
800 0.27
1000 0.33
MC24B
600 0.19
800 0.24
1000 0.29
MC30A
600 0.21
800 0.27
1000 0.33
MC30B
600 0.19
800 0.24
1000 0.29
MC35B
600 0.22
800 0.26
1000 0.34
MC35C
600 0.20
800 0.24
1000 0.32
MC36A
800 0.22
1000 0.30
1200 0.38
MC36B
800 0.15
1000 0.21
1200 0.28
MC36C
1000 0.16
1200 0.21
1400 0.26
MC42B
1200 0.27
1400 0.34
1600 0.40
MC42C
1200 0.20
1400 0.25
1600 0.30
1800 0.34
MC48C
1200 0.24
1400 0.30
1600 0.35
1800 0.41
MC48D
1200 0.20
1400 0.26
1600 0.31
1800 0.36
MC60D
1600 0.27
1800 0.33
2000 0.38
2200 0.44
MC61D
1600 0.24
1800 0.29
2000 0.35
2200 0.40
UNCASED UPFLOW - “A” TYPE
Mod l Airflow W t Coil
UC18A
600 0.16
800 0.23
1000 0.30
UC18B
600 0.14
800 0.20
1000 0.26
UC24A
600 0.15
800 0.21
1000 0.27
UC24B
600 0.13
800 0.18
1000 0.23
UC30A
800 0.21
1000 0.27
1200 0.33
UC30B
800 0.18
1000 0.23
1200 0.29
UC36A
1000 0.24
1200 0.32
1400 0.40
UC36B
1000 0.15
1200 0.22
1400 0.28
UC36C
1000 0.10
1200 0.15
1400 0.20
UC42B
1200 0.21
1400 0.28
1600 0.34
UC42C
1200 0.14
1400 0.19
1600 0.24
1800 0.28
UC48C
1200 0.18
1400 0.24
1600 0.29
1800 0.35
UC48D
1200 0.14
1400 0.20
1600 0.25
1800 0.30
UC60C
1600 0.28
1800 0.33
2000 0.38
2200 0.43
UC60D
1600 0.21
1800 0.27
2000 0.32
2200 0.38

258931-BTG-A-0606
8 Unitary Products Group
PHYSICAL DATA
CASED (FC) AND PARTIAL CASED (PC) UPFLOW “A” TYPE
Mod l Application
R frig.
Conn.
Typ s
Fac
Ar a
(Sq. Ft.)
Rows
D p
Fin
P r
In.
Coil Siz Tub
G om try
Tub
Dia.
Fin
Typ TXV
Op rating
W ight
(Lbs.)
FC18A3XN1
PC18A3XN1
Coo ing/
Heat Pump Sweat
3.4 2 14 (2) 14 x 17.5
1 x 0.866 3/8 Enhanced
None 42
36
FC18A2AN1
PC18A2AN1 3.4 2 14 (2) 14 x 17.5 2A 42
36
FC18B3XN1
PC18B3XN1 3.4 2 14 (2) 14 x 17.5 None 44
37
FC18B2AN1
PC18B2AN1 3.4 2 14 (2) 14 x 17.5 2A 44
37
FC24A3XN1
PC24A3XN1 4.38 2 14 (2) 18 x 17.5 None 46
40
FC24A2AN1
PC24A2AN1 4.38 2 14 (2) 18 x 17.5 2A 46
40
FC24B3XN1
PC24B3XN1 4.38 2 14 (2) 18 x 17.5 None 50
42
FC24B2AN1
PC24B2AN1 4.38 2 14 (2) 18 x 17.5 2A 50
42
FC30A3XN1
PC30A3XN1 4.38 2 14 (2) 18 x 17.5 None 46
40
FC30A2AN1
PC30A2AN1 4.38 2 14 (2) 18 x 17.5 2A 46
40
FC30B3XN1
PC30B3XN1 4.38 2 14 (2) 18 x 17.5 None 50
42
FC30B2AN1
PC30B2AN1 4.38 2 14 (2) 18 x 17.5 2A 50
42
FC35B3XN1
PC35B3XN1 3.9 3 12 (2) 16 x 17.5 None 53
45
FC35C3XN1
PC35C3XN1 3.9 3 12 (2) 16 x 17.5 None 55
46
FC36A3XN1
PC36A3XN1 4.86 2 14 (2) 20 x 17.5 None 51
44
FC36A2AN1
PC36A2AN1 4.86 2 14 (2) 20 x 17.5 2A 51
44
FC36B3XN1
PC36B3XN1 4.86 2 14 (2) 20 x 17.5 None 53
45
FC36B2AN1
PC36B2AN1 4.86 2 14 (2) 20 x 17.5 2A 53
45
FC36C3XN1
PC36C3XN1 4.86 2 14 (2) 20 x 17.5 None 55
46
FC36C2AN1
PC36C2AN1 4.86 2 14 (2) 20 x 17.5 2A 55
46
FC42B3XN1
PC42B3XN1 5.83 2 14 (2) 24 x 17.5 None 62
50
FC42B2CN1
PC42B2CN1 5.83 2 14 (2) 24 x 17.5 2C 62
50
FC42C3XN1
PC42C3XN1 5.83 2 14 (2) 24 x 17.5 None 64
54
FC42C2CN1
PC42C2CN1 5.83 2 14 (2) 24 x 17.5 2C 64
54
FC48C3XN1
PC48C3XN1 5.35 3 12 (2) 22 x 17.5 None 65
56
FC48C2CN1
PC48C2CN1 5.35 3 12 (2) 22 x 17.5 2C 65
56
FC48D3XN1
PC48D3XN1 5.35 3 12 (2) 22 x 17.5 None 73
58
FC48D2CN1
PC48D2CN1 5.35 3 12 (2) 22 x 17.5 2C 73
58
FC60C3XN1
PC60C3XN1 5.83 3 12 (2) 24 x 17.5 None 65
58
FC60C2CN1
PC60C2CN1 5.83 3 12 (2) 24 x 17.5 2C 65
58
FC60D3XN1
PC60D3XN1 5.83 3 12 (2) 24 x 17.5 None 78
60
FC60D2CN1
PC60D2CN1 5.83 3 12 (2) 24 x 17.5 2C 78
60

258931-BTG-A-0606
Unitary Products Group 9
HORIZONTAL - DUCT TYPE
Mod l Application
R frig.
Conn.
Typ s
Fac
Ar a
(Sq. Ft.)
Rows
D p
Fin
P r
In.
Coil Siz Tub
G om try
Tub
Dia.
Fin
Typ TXV
Op rating
W ight
(Lbs.)
HD24A3XH1
Coo ing /
Heat Pump Sweat
3.67 3 12 22 x 24
1 x 0.866 3/8 Enhanced
None 40
HD24A2AH1 2A
HD36B3XH1 3.67 3 12 22 x 24 None 40
HD36B2AH1 2A
HD48C3XH1 4.33 3 12 26 x 24 None 46
HD48C2CH1 2C
HD60D3XH1 5.83 3 12 28 x 30 None 54
HD60D2CH1 2C
UNCASED UPFLOW - “A” TYPE
Mod l Application
R frig.
Conn.
Typ s
Fac
Ar a
(Sq. Ft.)
Rows
D p
Fin
P r
In.
Coil Siz Tub
G om try
Tub
Dia.
Fin
Typ TXV
Op rating
W ight
(Lbs.)
UC18A3XN1
Coo ing /
Heat Pump Sweat
3.67 2 14 (2) 16 x 16.5
1 x 0.866 3/8 Enhanced
None 18
UC18A2AN1 2A
UC18B3XN1 3.67 2 14 (2) 16 x 16.5 None 20
UC18B2AN1 2A
UC24A3XN1 4.58 2 14 (2) 20 x 16.5 None 22
UC24A2AN1 2A
UC24B3XN1 4.58 2 14 (2) 20 x 16.5 None 23
UC24B2AN1 2A
UC30A3XN1 4.58 2 14 (2) 20 x 16.5 None 22
UC30A2AN1 2A
UC30B3XN1 4.58 2 14 (2) 20 x 16.5 None 23
UC30B2AN1 2A
UC36A3XN1 5.04 2 14 (2) 22 x 16.5 None 25
UC36A2AN1 2A
UC36B3XN1 5.04 2 14 (2) 22 x 16.5 None 28
UC36B2AN1 2A
UC36C3XN1 5.04 2 14 (2) 22 x 16.5 None 30
UC36C2AN1 2A
UC42B3XN1 5.96 2 14 (2) 26 x 16.5 None 34
UC42B2CN1 2C
UC42C3XN1 5.96 2 14 (2) 26 x 16.5 None 36
UC42C2CN1 2C
UC48C3XN1 5.50 3 12 (2) 24 x 16.5 None 38
UC48C2CN1 2C
UC48D3XN1 5.50 3 12 (2) 24 x 16.5 None 42
UC48D2CN1 2C
UC60C3XN1 5.96 3 12 (2) 26 x 16.5 None 42
UC60C2CN1 2C
UC60D3XN1 5.96 3 12 (2) 26 x 16.5 None 45
UC60D2CN1 2C

258931-BTG-A-0606
10 Unitary Products Group
FULL CASED “A” TYPE MULTI-POSITION
Mod l Application
R frig.
Conn.
Typ s
Fac
Ar a
(Sq. Ft.)
Rows
D p
Fin
P r
In.
Coil Siz Tub
G om try
Tub
Dia.
Fin
Typ TXV
Op rating
W ight
(Lbs.)
MC18A3XH1
Coo ing /
Heat Pump Sweat
3.40 2 14 (2) 14 x 17.5
1 x 0.866 3/8 Enhanced
None 53
MC18A2AH1 2A
MC18B3XH1 3.40 2 14 (2) 14 x 17.5 None 53
MC18B2AH1 2A
MC24A3XH1 4.38 2 14 (2) 18 x 17.5 None 56
MC24A2AH1 2A
MC24B3XH1 4.38 2 14 (2) 18 x 17.5 None 56
MC24B2AH1 2A
MC30A3XH1 4.38 2 14 (2) 18 x 17.5 None 56
MC30A2AH1 2A
MC30B3XH1 4.38 2 14 (2) 18 x 17.5 None 56
MC30B2AH1 2A
MC35B3XH1 3.9 3 12 (2) 16 x 17.5 None 65
MC35C3XH1 None
MC36A3XH1 4.86 2 14 (2) 20 x 17.5 None 64
MC36A2AH1 2A
MC36B3XH1 4.86 2 14 (2) 20 x 17.5 None 65
MC36B2AH1 2A
MC36C3XH1 4.86 2 14 (2) 20 x 17.5 None 65
MC36C2AH1 2A
MC42B3XH1 5.83 2 14 (2) 24 x 17.5 None 72
MC42B2CH1 2C
MC42C3XH1 5.83 2 14 (2) 24 x 17.5 None 72
MC42C2CH1 2C
MC48C3XH1 5.35 3 12 (2) 22 x 17.5 None 82
MC48C2CH1 2C
MC48D3XH1 5.35 3 12 (2) 22 x 17.5 None 82
MC48D2CH1 2C
MC60D3XH1 5.83 3 12 (2) 24 x 17.5 None 86
MC60D2CH1 2C
MC61D3XH1 6.80 3 12 (2) 28 x 17.5 None 98
MC61D2CH1 2C
Not : MC coi s avai ab e with a factory insta ed horizonta drain pan option (H).
HORIZONTAL CASED TYPE
Mod l Application
R frig.
Conn.
Typ s
Fac
Ar a
(Sq. Ft.)
Rows
D p
Fin
P r
In.
Coil Siz Tub
G om try
Tub
Dia.
Fin
Typ TXV
Op rating
W ight
(Lbs.)
HC18A3XH1
Coo ing /
Heat Pump Sweat
3.40 2 14 (2) 14 x 17.5
1 x 0.866 3/8 Enhanced
None 40
HC18A2AH1 2A
HC30A3XH1 3.40 3 12 (2) 14 x 17.5 None 49
HC30A2AH1 2A
HC36B3XH1 3.88 3 12 (2) 16 x 17.5 None 54
HC36B2AH1 2A
HC42C3XH1 4.86 3 12 (2) 20 x 17.5 None 66
HC42C2CH1 2C
HC60D3XH1 5.83 3 12 (2) 24 x 17.5 None 76
HC60D2CH1 2C