YORTOT W08 User manual
W08 User Manual
Please email our friendly after-sale team at:
If faulty product is found when setting up
Thank you for purchasing on YORTOT！Please read
these instructions carefully and keep the user manual in
safe place for future reference.
What included
1 White Noise Machine
1 AC/DC Adaptor
1 USB Charging cable
3 AA Batteries sold separately
AC100-240V, 50/60Hz.
Output: 5V/1A, Class 2.
Power Specifications
• 10 Nature Sounds
• 5 White Noises
• 5 Fan Sounds
• Sleep Timer
• 7 Color Night Lights
• 5 Level Dimmer
• 1-16 Level Adjustable Volume
• Support Outlet And Battery Power
Features
1
Power On/Off
(Sleep Timer) Nature Sound
White Noise Fan Sound
Dimmer Night Light
Volume - Volume +
Front View
2
3
Bottom View
DC 5V
MADE IN CHINA
: 5V 1A
YORTOT White Noise Machine
Model : W08
Input : 100-240V
Power Connector
Battery Compartment (3* AA Batteries)
4
Getting Started
Short Press the “ ” button to turn it on, the machine
begin to play sound.
Long Press the “ ” button to turn sound off.
Sleep Timer
When machine is on, press repeatedly the “ ”
button to select a sleep timer ranging from 0.5H, 1H,
2H, 3H to enter sleep mode. The led light of the
selected timer will light up accordingly. If you want to
leave your machine on all night, please press the
“ ” button until there is no led light on.
When you use the timer, the sound and light will turn
off once preset sleep time comes.
Use The Timer
5
Pick a sound
1.
2.
1.
2.
1.
2.
Press the “ ” button to switch among all of 5 white
noises sounds in sequence.
Long press the “ ” button to turn off white noise.
Press the “ ” button to switch among all of 5 fan
sounds in sequence.
Long press the “ ” button to turn off fan sound.
Press the “ ” button to switch among all of 10
nature sounds in sequence.
Long press the “ ” button to turn off nature sound.
6
Gentle Waves
Lullaby
Ocean Waves
Rain
Thunderstorm
Brook
Shushing
Bird
Summer Night
Campfire
White Noises 1
White Noises 2
White Noises 3
White Noises 4
White Noises 5
Fan Sounds 1
Fan Sounds 2
Fan Sounds 3
Fan Sounds 4
Fan Sounds 5
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
1
2
3
4
5
Here id the list of track
White Noises Nature Sounds
Fan Sounds
Volume Adjustment
Press the “ ” button to decrease the volume and
“ ” button to increase the volume maximum level,
you will hear a short beep.
Night Light
Brightness of Night Light Adjustment
7
Press the “ ” button to select which color night light
you like.
Long press the “ ” button to turn off night light.
Press the “ ” button to select which one Bright-
ness you want.
8
Battery Operated Setting
Install 3* AA batteries into battery compartment
NOTICE:
In Battery Operated Mode, machine has all functions.
But the battery drains fast, we recommend using Outlet
Operated Mode.
Support
The White Noise Machine comes with one year
warranty.
If you have any issue with this White Noise Machine,
We will address your issue within 24 hours.
FCC Requirement
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV technician for help.
Table of contents
