Youmoon YM-Z38 User manual

1Bluetooth Speaker 2USB charging cable
Bluetooth 3.0, high speed and low
power consumption.
Built in rechargeable lithium battery.
Built in microphone for hands free
phone calls.
Support TF card playback.
AUX in function for non-bluetooth devices.
3AUX input cable 4Warranty card
Bluetooth Speaker
User Guide
YM-Z38
1
1 Power on/off.
Play/Pause/Mode button
Next
Vol+
Phone button
PREV
Vol-
Aux jack
DC 5V charging port
TF card slot
2
3
4
5
6
7
8
9
10
2 3 4
5 6 7
8
9
10
Read this manual carefully before putting
the appliance into operation and keep
this manual for future reference.
Do not insert any metal object into the
device.
To avoid a static charge, do not use the
device in an extremely dry climate.
Do not attempt to repair the device
yourself.
Batteries (battery pack or batteries
installed) shall not be exposed to
excessive heat such as sunshine,
fire or the like.
Bluetooth version 3.0
Bluetooth profiles HSP, HFP, A2DP
and AVRCP
Bluetooth operating
distance
10 meters (equal to
33 feet)
Output power 5wX2
Frequency response 100Hz-20kHz
Distortion ≤1%
Microphonesensitivity -40db
Playback time Music time 6 hours,
talk time 8 hours
Charging input power DC 5V
Charging time Approx3 hours
Unit INCH 6.3*2.4*1.6 INCH
1.Press and hold the Power on/off button
until you hear a tone, the Bluetooth status
LED will flash red and blue, indicating that
the Bluetooth speaker is in pairing mode.
2.Set your Bluetooth-enabled device to
search for Bluetooth devices.
3.When the Bluetooth-enabled device finds
the Bluetooth speaker, select “YM-Z38”
from the list of found devices.
4.After a successful pairing, a beep tone
will be heard indicating that the device is
paired and the Bluetooth status LED will
stay solid blue.
If a previously paired device is in range
when the Bluetooth speaker is turned on,
the Bluetooth speaker will connect to it
automatically.
YM-Z38
YM-Z38
The screenshots above are typical of many
Bluetooth-ebabled devices in the market
today,andare used to assist in the
explanation of the pairing process. Your
Bluetooth-enabled devices’s interface and
interaction with the Bluetooth Speaker may
differ slightlyfrom the illustrations slightly
above.
Using the Bluetooth Speaker
Press and hold the button for about 3 seconds.
Qucik press button to play or pause music.
Press and hold button for about 3 seconds to
switch between Switch between Bluetooth, TF
card playback, and AUX mode.
Press button to increase volume.
Press button to decrease the volume.
Double quick press the button, the last
number called will be redialed.
Press button to skip to the next song.
Press button to skip to the previous song.next
song.
To answer a call, quick press the button.
To end a call, quick press the button again.
Charging the Bluetooth speaker
Make sure you charge your Bluetooth
speaker for at least 4 hours before using
it for the first time.
Insert TF card into the TF card slot.
Press button to turn on the Bluetooth speaker.
Press Mode button to switch the Bluetooth
speaker to TF card playback mode.
Play/Pause/Mode button
To charge the Bluetooth speaker, connect
the supplied micro USB cable to the USB
charging port and the other end to your
computer or USB charging device. The
LED indicator will flash when charging.
When charging is completed, the LED
indicator will stop flashing and stay solid
green.
LIKE IT? LOVE IT?
REVIEW IT.
Power User
At Youmoon ,we’re committed to
constantimprovement through user
feedback.OurPower User programme is
oneof the main ways we engage with
usersto learn how we can do better.
Asa Power User, you can Email us to
receivefree samples of existing and
pre-releaseproducts in exchange for
insightfuland unbiased review.
Tryour products. Share your experience.
Helpus get it right.
www.youmoontech.com

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.