YoungShin Magicar M902F User manual

Two-Way FM Remote
User s Guide
M902F
www.magicar.com
USER’S GUIDE
RF2WN
By Youngshin Electronics Co., Ltd.
All manuals and user guides at all-guides.com
all-guides.com

#
2
Congratulations
Congratulation for your becoming a member of Magicar family.
Thank you for choosing Magicar M902F, a state-of-the-art Two Way alarm
remotstartsystemforyourvehicle.
We, Youngshin Electronics Co., Ltd., are constantly performing research
and development in order to make your vehicle more safe and comfortable.
Securityandcomfort,that swhatYoungshinElectronicsCo.,Ltd.isallabout.
When you insert a battery in the remote, the LCD will show each
icon one by one with music play.
M902F User s Guide
1
All manuals and user guides at all-guides.com

TABLE OF CONTENTS
4
IMPORTANT INFORMATION
3
1. Inordertoauto-startyourmanualtransmissioncar,youmustfirstsetthe
Magicar system to Reservation Mode before leaving your vehicle.
The purpose of Reservation Mode is to leave the transmission gear in the
neutralposition whenyouleaveyourvehicle.
Do not setthe reservationmodewhilesomeoneisinside of thevehicle.
Itwillbedangeroustousethesystemifthedoorpinswitchisnotingood
workingorder.
2. NEUTRAL SAFETY SWITCH
YourvehicleshouldstartsonlyinParkedorinNeutral positionwiththekey.
Ifthevehiclestartsinanyotherposition,itisverydangeroustochoosethe
automatic transmission mode. Youngshin shall not be responsible for any
damages or consequences resulting from failure to choose the manual
transmission mode for these vehicles.
3. Theserialnumberoftheremoteisrequiredforthewarranty.
Please make sure your remote has the serial number.
4. Youmaybechargedforrepairifthedamage isresultedfrom theActof
God, abuse or improper care of the product.
The Youngshin swarranty doesnot coverany of theoptional accessories,
suchas,externalrelaysordooractuators.
5. ThisproductisintendedonlyforAutoSecurity.
Anyotheruseisnotallowed.
We are not responsible for any injuries or damages resulting
from your failure to comply with the above requirements.
1. Description of Remote Appearance
2. Magicar color LCD
3. LCD Icons
4. Remote-Pager Button Functions
5. More Button Functions
6. [I] Door Lock
7. [I] Door Unlock
8. [I-] Auto Arming
9.[II-] Auto-Start Function
10. Reservation Mode (manual transmission only)
11. Canceling Reservation Mode
12. [III-] Trunk Release
13. [IV] Query Function
14. [IV-] Panic Mode
15. [I+II] Siren Chirp Delete for Arm/Disarm ON/OFF
16. [I +III] Valet Mode
17. [(I+III)-] Dual Stage Shock Sensor
18. [I +IV] IgnitionLock
19. [II +III] Passive Arming/ Active Arming
20. [II +IV] Timer(24 Hours) Reservation
21. [III +IV] Turbo Mode
22. [(III +IV)-] Recording & Play on Voice Module (Optional)
23. [II] Aux1
24. [III] Aux2
25. Real Time Remote Paging Functions
26. R.P.S(Remote Paging System)
27. Keyless Entry with R.P.S Sensor
28. Paging for Shock Sensing
29.PagingforTheft
30.LowCar Battery Alert
31.Starter-KillFunction
32. Reporting Door Opening
33. Propane gas powered vehicles
34. Remote-Pager Learn Routine
35. Adjustable by Magicar Users
5
5
6
7
9
10
10
10
11
11
13
14
14
15
15
16
16
16
17
17
18
18
19
19
19
20
20
21
22
22
22
22
23
24
25
All manuals and user guides at all-guides.com

LCD Icons
6
Description of Remote Appearance
MAGICAR COLOR LCD
5
Front Side Rear
The model name, RF2WN, stands for 2 Way FM 4 Button Remote.
The remote-pager comes with Magicar which is a unique color LCD display
thatvisuallytellsthevehicleownerthesecuritystatusofyourcaratalltimes.
There arediffering icons that willappearonyour Magicar LCDindicatingwhat
yourvehicleiscurrentlydoing.
Auto
Indicates that someone is paging you from your vehicle.
Displayifyourcarislockorunlcok
Indicatesthatyourremote-pageristransmittingsignalsto
thecontrollerunit.
IndicatesifVibratorisonoroff.
IndicatesifRPSisonoroff.
Displaysremainingbatterylife.
Indicates if Recording & Play on Voice Moduole (Optional)
areonoroff.
IndicatesiftheAutoLock/Unlockmodeisonoroff.
(Iconflashesforlongerrange.)
IndicatesifTimerModeisonoroff.
IndicatesifTurboStartModeisonoroff.
IndicatesifPassiveArmingModeisonoroff.
Indicates that the Shock Sensor has been triggered.
IndicatesthatShocksensoristurnedonoroff.
Icon Explanation
IndicatesifyouareinValetMode.
Indicatesifyourcarparkinglightsareflashing.
Indicatesthatyour carsirenis turnedonor offwhenyou
lockorunlockthevehicle.
All manuals and user guides at all-guides.com

8
7
Note :
" " Represents pressing the button for 2 seconds.
"()"Represents simultaneously pressing the buttons.
"( ) "Represents simultaneously pressing the buttons for 2 seconds.
Displaysifyourdoorisopen.
Displaysifyourvehiclehasauto-startedproperly
orignitionon.
Displaysifyourtrunkisopen.
Icon Explanation
1.TimeClock. 2.Inside Temperature ofthevehicle.
3. Remainder of the engine running time.
4. Remainder of the battery power.
IndicatesifIgnitionLock/Unlockisonoroff.
1
2
3
4
5
6
7
8
I
I
- ①
I - ②
I - ③
( III + IV) -
II
III
IV
1/2sec
2sec
2sec
2sec
2sec
1/2sec
1/2sec
1/2sec
AlarmMode -on/off,RPS -on/off,
SirenOff,StarterKill(Anti-Grind)-
on/off
Auto Arming turned On.(Auto icon will be turned on).
Longer range Auto Arming On.(Auto icon Flashes.)
Auto Arming turned Off.
AUX 1
Recording & Play on Voice Module(Optional)
AUX 2
Query Function
Button PressedFor Function
Remote-Pager Button Functions
9
10
11
12
13
14
15
16
17
18
19
20
II-
III -
IV -
( I +II )
( I + III)
( I + IV )
( II+ III )
( II+ IV)
( III + IV)
( I + III) -
( I +II ) -
( I + IV ) -
2sec
2sec
2sec
1/2sec
1/2sec
1/2sec
1/2sec
1/2sec
1/2sec
2sec
2sec
2sec
Auto-startFunction-on/off
Trunk Release
Panic,Press ItoshutoffSiren.
Siren Chirps for Lock/Unlock-on/of f
Valet Mode-on/off
IgnitionLock–on/off.
Passive Arming – on/of f.
TimerStartMode-on/off
Turbo Mode - on/of f
Shock Sensor - on/of f
Programming Menu 1 - Installer Only
Programming Menu 2 - Installer Only
Button PressedFor Function
Note :
I buttonProceedsin(1) (2) (3) (1).....repeatedly.
At(2), theiconwillflash.
All manuals and user guides at all-guides.com

[ I ]Door Lock
[ I ]Door Unlock
10
Auto
[ I- ]Auto Arming
More Button Functions
9
(1)T ime Setting
Beep sound for confirmation
STEP 1
( II+ III ) -2sec
Button PressedFor Function
Timesettingison.
The numbers flash. Beep Sound.
STEP 2
( I )
( II+ III ) -
1/2sec
Change time.
Change minutes.
Timesettingisoff. Beepsound.
You may continue for motion
option.
STEP 3
STEP 4
( I )
( II )
1/2sec
1/2sec
2sec
(2) RPS & V ibratoronoroffselectbetween and fortemp.
Beep sound for confirmation
STEP 1
( II+ III ) -
2sec
Button PressedFor Function
STEP 2
RPS on or off, beep sound for
confirmation.
Vibratoronoroff,beepsoundfor
confirmation.
( III )
( IV )
( I + IV )
1/2sec
1/2sec
1/2sec Selectbetween and
Note : The step 2 has to be completed within 15 seconds.
If the doors are closed and unlocked, you can lock and arm the vehicle by
pressingButton [I] fora ½second.Thesiren chirpsandtheparkinglightsflash
once to confirm the lock and arming.
If the doors are closed and locked, you can unlock and disarm the vehicle by
pressingButton [I] fora ½second.Thesirenchirpsandtheparking lightsflash
twice toconfirmtheunlock anddisarm.Ifyouhear four chirps and4 flash ofthe
parking lights, that means the alarm went off while the vehicle was armed.
You can turn this function onoroff bypressing Button [I] for 2 seconds. When
set toAuto arming, your security system will arm automatically after all the car
doors are closed, your remote is away from the vehicle by more than 50 to 100 ft
and 15 seconds have passed since the last Auto Disarm. Your system will
disarm automatically ifyour remote comes within 50to100 ftradius from the
vehicle.
▶▶Setting Auto Arming Function.
The range varies significantly depending on the radio signal environment.
Each time you press Ibuttonfor2seconds:
①①Firsttime:Autoiconisturnedon.
②②Secondtime :Autoiconflashes-forlongerrange.
③③Thirdtime: Autoiconisturnedoff.
All manuals and user guides at all-guides.com
all-guides.com

12
[ II- ]Auto-Start Function
Reservation Mode
(manual transmission only)
11
Press Button [II] for2seconds to auto-start an automatic transmissionengine.
Upon receiptofthesignalfromtheremote,thesystem will confirmthereceipt
byachirp. Amanualkeyintheignitionisrequiredtodrivethecar.
Insertyourkey intheignitionandturnthekeytoOnpositionwithin20second
afteryouopenthedoorofvehicle. Theenginewillshutoffin20secondsafter
openingthedoorifyoudo notinsertthekeyandturntoOnposition.
Donotcrankthestarterwhilethevehicleisrunning.
The engine willrun15/25/45/5minutes and thenshut off.
Ifyourremote-pager hasaproblemstartingthevehicle,Magicarwilltry2
additionaltimes.Iftheenginedoesnotstartafterthethirdattempt,pleasecall
your authorized Magicar dealer.
Itisthesafetysystemto avoidAuto-Startingwhenthetransmissiongearisnot in
theneutralposition.
Automatic Reservation
After arriving atyour destination, when remove your key from the ignition, the
doors will be unlocked and the engine will remain running for 2minutes. While
the engine isrunning,ifyou open andclosethe doors,the enginewillbeoff and
then the Reservation Mode will be completed.
However, some of vehicles will not be set the Reservation Mode as per the
above procedure. In this case,please setitfollowingtheManualReservation.
▶shows the remainder of the engine running time.
Manual Reservation
If you press Button II for 2 seconds before removing the key from the ignition,
theSirenwill chirp one time and the car parkinglightsflashonetime.Afterthat,
the engine will be running for 2 minutes, even you remove the key form the
ignition. After the procedure, when the driver exits the vehicle and close the
door, the engine will be shut off, and then the Reservation Mode will be
completed.
Note :
InNoiseSensingmode,itishappenedthatsomelampsonfascia
boardofvehicles areturnedonfor 3seconds.However,itis aregular
Reservation process.
W arning :
▶ForManualtransmissionvehicles,themaincontrollerhastobeset
Manual transmission option”when Magicar systems are installed.
YoungshinElectronicsCo.,Ltd.isnotresponsibleorliableforany
damages that were occurred when you set “Auto transmission option”to
Manualtransmission vehicles. Pleasecarefully check it outagain and
confirmitfromyourinstaller.
▶Iftheengineisstartedonthestatusofnot“Parking”or“Neutral”
positionsin Automatictransmissionvehicles,you shouldcheckout the
Reservation Mode same as the Manual transmission vehicles.
All manuals and user guides at all-guides.com

[ III- ]Trunk Release
[ IV ]Query Function
14
Canceling Reservation Mode
13
1. After completion ofReservation Mode, ifthe doors ortrunk door are still be
opened, the Reservation Mode will be cancelled.
2. If the key ispulled out from the ignition, the engine will bestill running and
Magicar system will be in the procedure of Reservation Mode. During that
procedure, ifthe button IIispressed more than 2 seconds, the engine will be
stopped and the Reservation Mode will be cancelled at the same time.
3.The Reservation Mode will be cancelled, if you enter the Valet Mode.
Warning:
The reservation mode forAutostarting must be canceled, that is
because the vehicle may be able to move down on inclination.
Diagnosing Problems with Auto-Start
Error Reason
Engine On
Key On
Door Open
Trunk Open
Reservation Off (Manual Transmission Only)
1
2
3
4
5
Error Number
(#oftimesparkinglightsflash)
Press Button [III] for 2 seconds inorder tounlock and release your trunk door.
Theinstallationofthismodeisavailableonlyifyourvehiclehasatrunkactuator.
Notethatthetrunkreleasefunctionwillnotonlyreleasethetrunkbutwillunlock
allthedoorsaswell.
If the trunk sensing wire has been connected, the reservation will becancelled
when you open the trunk in the manual transmission mode.
Query Function allowsthe owner to visuallymonitorthestatusofyour carby
looking at the remote-pager MagiGLO LCD icons.
Press Button [IV] fora ½secondtoactivatethe Query Function.
You will receive one ofthe following response ifyou are within the transmitting
distance:
Armed, engine not running
Disarmed, engine not running
Armed, engine running
Disarmed, engine running
LCD
Beep, Beep, Beep
Beep, Beep
Beep/Beep, Beep/Beep, Beep/Beep
Beep/Beep , Beep/Beep
Siren in the vehicle
chirp
chirp,chirp
chirp,chirp,chirp
chirp,chirp,chirp,chirp
All manuals and user guides at all-guides.com

16
15
[ I+III ]Valet Mode
[(I + III)-] Dual Stage Shock Sensor
[ I+IV ]Ignition Lock
▶Query tells you the inside temperature of the vehicle.
▶Query tells you the battery voltage also.
Press IV forQuery. Pressonemoretimewithin6seconds,itwilltellyou
thebattery’svoltage.
(EX)Forexample,ifthebatteryvoltageis12.6V,itwillshow
Ittellsyouthetemperaturewitheither or
[ IV- ]Panic Mode
[ I+II ] Siren Chirp Delete for Arm/Disarm ON /OFF
Press Button [IV] for 2 seconds toenter Panic Mode. Inthis mode, the car will
arm ifnot armed already and the siren will activate and the parking lights will
flash for 90 seconds. Panic mode will stop the remote start. In order to
disengage Panic Mode, press Button [I] fora½second. Then, press Button
[I] fora ½secondtounlock/disarmyour vehicle.
With this programming, the speaker icon in the LCD will disappear and siren
chirpisdeleted.
Note :
Sirenwillgooffifdoorsensor,shocksensor,orpanicmodeisactivated.
Press Buttons (I+III) for2 secondstoactivateordeactivatethedualstage
shock sensor. The dual stage shock sensor will activate in 30 seconds after the
Magicar alarm mode is armed. When the dual shock sensor is engaged, the
remote-pagersecurityalertswillbetriggeredbythefollowing:
▶Light impact to your vehicle will activate the first stage shock
sensor
and the car siren will chirp 4 times in addition to the
parking lights flashing 4 times. The remote pager unit will beep
and the hammer icon shows up a couple of times
▶Heavy impact to your vehicle will activate the second stage
shock sensor
and the car siren will chirp for 10 seconds and
the parking lights will flash for 10 seconds. The remote-pager
will be notified audibly and a hammer icon will blink in the LCD.
Press Button
I for a 1/2 second to turn off the second stage
shock sensor sirens and flashing lights.
This programmable option enables your vehicle to automatically lock the doors
in 30seconds after the vehicle has been started with a key while all the doors
areclosed.
In addition, the vehicle will automatically unlock the doors upon pulling the key
outfromtheignition.
The only feature operating in valet mode is the keyless entry function and
optional auxiliary functions. Valet Mode isveryuseful whenwashing your vehicle
orhavingitserviced.
All manuals and user guides at all-guides.com

[ III+IV ]Turbo Mode
18
17
1. You can turn this function onoroff bypressing Buttons [II+III] fora ½
second. Passive Icon will be highlighted in the LCD . When set to passive
arming, your security system will arm automatically 30seconds after all the car
doors are closed. Passive locking means the door will lock when the system is
passively armed. Inthe default factory setting, the system isarmed and locked
actively, which means the system will only arm/lock when the remote-pager is
utilized.
2. If you select both Auto Arming and Passive Arming, Auto Arming takes
priority overPassiveArming.
3. Under the Manual mode, the Passive arming will lock the doors upon
reservation. Under the Turbo mode, the Passive arming will lock the doors
uponclosing thedoorsaftertheignitionhasbeenturnedoff.
You may reserve theremote startingtimeby 1) setting upthe startingtimeand
2)turningonTimericon.
▶ Procedure
1.Timeiconshouldbeturnedoff.
2.Setupthestartingtime.Makesurethecurrenttimeiscorrect.
3. TurnonTimeicon.
[ II+III ] Passive Arming/Active Arming
You can turn this feature on and off by pressing Buttons [III+IV] fora ½
second. Under this mode, engine continues running or 2 minutes after key has
been taken out from the ignition. This mode isuseful with Turbo vehicles that
needtobecooleddownafterlong drive.
The icon located on the left of Auto is On when pressed III & IV buttons
simultaneously for 2 sec and converted to Recording & Play mode of Voice
Module. And it can be recorded & played when pressed II and III for0.5sec.
But, incase ofnotpressingwithin 60sec, the Recording& Playmodeisoff
automatically.
Turbo
[(III+IV)-]Recording & Play on Voice Module (Optional)
Passive
[ II+IV ]Timer(24 Hours) Reservation
Beep sound for confirmation.
STEP 1
( II+ III ) -
2sec
Button PressedFor Function
Timesettingison.
The numbers flash. Beep sound.
STEP 2
( II )
( II+ III ) -
1/2sec
Change time.
Change minutes.
Set up completed. Beep sound.
STEP 3
STEP 4
( I )
( II )
1/2sec
1/2sec
2sec
All manuals and user guides at all-guides.com

20
[ II ] Aux1
[ III ] Aux2
Real Time Remote Paging Functions
19
Aux1willgooutifthebuttonIIispressedfor1/2second.
Therearefourdifferenttypesofoutputs(Consultyourinstaller)thatareusedto
operateasunroof,a mirrororany other auto accessories.
Aux2willgooutifthebutton III ispressedfor1/2second.Likewise,ithas4
differenttypesofoutputs.
Note :
1. The duration of the Aux output should be vary depending on the
equipments that these outputs operate.
2. These Aux outputs are 250 mA outputs. Therefore, please use relays
if you connect these outputs to equipment that uses more than 250 mA.
Otherwise, youwill damage these output circuitries.
3.TheseAuxfunctionswillrequireextrainstallationfees.
Pleaseconsultyourinstaller.
Types : R.P.S(Remote Paging System), Theft and Shock Sensing Whenever
oneoftheseistriggered,itisreportedtotheremotewithbeepsandflashing
icons in the LCD. In case when the owner has not been alerted, the remote
continues making beeping sounds until turned off.
Theft –one beep every 2 seconds ;
Shock Sensing –one beep every 4 seconds ;
R.P.S –one beep every 6 seconds.
These functionswillbeavailedwhilethevehicle isarmed.
R.P.S(Remote Paging System)
Keyless Entry with R.P.S. sensor
R.P.S isa featurethatallows anindividualtopagetheownerof avehicle
bysimplytappingtheR.P.Ssensoron the frontwindshieldofthecar.
Thisvibration isdetectedandyourremote-pagerwillring fourtimesand
a telephone icon will appear on the LCD indicating that someone is paging you
fromyourvehicle.
With the new patented RPS system, you can open the door without a key or a
remote. Programming 4 number pass words (1111- 9999)
●Step 1: KeyOn
●Step 2: DoorOpen
●Step 3: Knock 10 times. Each time the green LED will flash once.
Itshouldbelessthan1.5secondsbetweentheknocks.
●Step 4: TheredLEDwillflashrapidly.Ifitdoesn’t,gotothestep1.
●Step 5: Enter your 4 number pass words by knocking - each number 1-9.
To enter the first number, knock the same number of times. The
interval between the knocks should be less than 1.5 seconds. Then,
waittoconfirmby countingthenumberofflashofthe redLED. Ifthe
red LED flashes a wrong number, go back to the step 1. If the red
LED confirms a correct number,continue entering the other 3
numbers.
●Step 6: SignalLightswill flashonceto confirmtheprogramming.
All manuals and user guides at all-guides.com
all-guides.com

Paging for Theft
Starter-Kill Function
22
21
When the vehicle is armed, unauthorized car door opening will activate the car
sirentheremotewillbenotifiedaudibly andthedooriconwillappearintheLCD.
The siren will go off even under the mute mode.
Press Button [ I ] fora ½secondtoturnoffthecarsirenandflashinglights.
Repeat thisstep(pressButton [ I ] fora ½second) again to disarm alarm
mode.
When the driver exits the vehicle with the parking lights on, itisreported tothe
remote upon arming (active, passive or auto). The remote will make beeping
sounds, Beep, Beep.
Inalarmmode,thestarterkillfunctionisactivated. Thisfeaturedisengages
the starter mechanism on your car, which prevents you from starting your car
even with a manual key when your vehicle’salarmmode is activated.
Thevehiclewillindicatethedooropeningbyflashingthesignallights.
(Thisistheinstalleroption)
Keyless Entry with R.P.S sensor
●Step 1: Knock 10 times Each time the green LED will flash once.
Itshould be less than1.5 secondsbetweentheknocks.
●Step 2: TheredLEDwillflashrapidly.
●Step 3: Enter the pass words. To enter the first number, knock the same
number of times. The interval between the knocks should be less
than 1.5 seconds. Then, wait to confirm by counting the number of
flashofthe red LED. If theredLED confirmsacorrect number,
continue entering the other 3 numbers. If a wrong number is entered,
the RPS will send out signals to the remote. Therefore, you go back
tothestep1.
●Step 4: The door will unlock and remote will show unlock with two beeps.
Note :
Youmaytry upto 5timeswithin30minutes. After that,thekeyless
functionwillnotbeavailablefor thenext24hoursoruntilyouunlock
the doorwiththeremotewhichevercomesfirst.
Whentheshock sensoristriggeredby animpact inthevehicle,itisreportedto
the Remote that will beep and the hammer icon shows up for 7seconds. Press
Button [I]fora ½second to turn offtheshocksensor sirensand flashing
lights.
Low Car Battery Alert
Reporting Door Opening
Paging for Shock Sensing
All manuals and user guides at all-guides.com

Remote-Pager Learn Routine
24
23
Inthecaseof propanegaspoweredvehicles,thereisariskofleftovergas
(anywhere between the gas tank and the engine cylinder) freezing during winter.
Therefore, itneeds toburn the left over gas completely before the engine is
turnedoff.
▶ 1 Howto burnthe leftovergascompletely.
●
1-1 Automatic Transmission Vehicle Shuts off the Gas Valve switch before turn off
theignitionsothattheleftovergasinthesystemburntcompletely.Then,turnoffthe
ignitionandtakethekeyout.
●
1-2 Manual transmissisn vehicle or turbo mode of the automatic transmission
vehicle. In the case of the manual transmission vehicle or turbo mode of the automatic
transmission vehicle,turnofftheignitionfirst,shutoffgasvalveswitchandthengetout
ofthevehicleand closethedoor.The enginewillshutoff upontheleftovergas has
been completely burnt.
▶ 2 In the case of the manual transmission vehicle or turbo mode of the automatic
transmissionvehicle,ifyoudonotshutoffthegasvalveswitchtherewillbeleftovergasin
thesystemaftertheengineisshutoff4minutesrunningafterdoorclosing. Andthisleftgas
willberefrigeratedatwinter,soyouhavetoshutoffgasvalveswitchlikeabove1-2.
▶ 3 Drivinginshort distanceafterremote-startforagaspoweredvehicel
Afterthe remote-start, if youdrivethevehiclefor lessthan4 minutesand20seconds,the
enginewill continue running for4 minutes and 20seconds,that isbecauseof the gas option,
thatshutsoffthegasvalvein20secondsandshutsofftheignitionin4minutesafterthedoor
openingafterremotestart.
So in the case of Manual Transmission Vehicle, the system can not beentered to reservation
mode in this 4minutes and 20 seconds period.
If you replace or add additional remotes, you can program up to three remotes,
please perform the following procedure:
Step1 : Activate Valet/Programming mode by manually turning the
ignitionn on and off five times
(between Acc and On) with car
key within a 10 second period.
The parking light will flash once with
successful completion of this step.
Step2 : Within a 10 second period after cycling the ignition for the 5th
time, press button I.The car parking lights will flash once to
confirm that the transmitter has been programmed. Continue
program the additional remotes. The parking lights will flash two
times when the programming mode is expired.
Propane gas powered vehicles
4minutes 50seconds
The system wait
Stop of running
Remote
Running
Ignition
Lock
20sec. 30sec.4minutes
Shutoffthe
GAS valve
End of
Remote running
Opening
The door
All manuals and user guides at all-guides.com

25
▶1 Adjusting the sensitivity of the shock sensor
It is advised that you may want to know where the shock sensor is located so
that you can adjust the sensitivity of the volume depending on your need.
Warning:
Pleasebecarefulnottoturnthevolumebeyonditslimit.
The volume can be damaged.
▶2 Adjusting the volume of the siren
The volume of the siren can be reduced by cutting off the jump wire attached
tothesiren.
▶3 Adjusting the volume of the R.P.S Sensor
Adjustable by Magicar Users
All manuals and user guides at all-guides.com