YUAN High-Tech MULTI CONVERTER User manual

MULTI
CONVERTER
BOX
User Manual
Ver1.1

Content
Feature ...................................................................................3
Rear Panel................................................................................4
Front Panel...............................................................................5
Button/LED Indicate ....................................................................6
Installation ............................................................................. 17
Package Contents ..................................................................... 17
Specifications.......................................................................... 18
Firmware Upload ...................................................................... 20
Appendix Table A ..................................................................... 22
Update List............................................................................. 23

Feature
Support Multi-signal input and Multi-signal output
HDMI
SDI
DVI-D
DVI-A
YPbPr
Composite
S-Video
External Button Configuration
FULL HDMI Support including embedded audio
Firmware is upgradable in the field using the integrated USB port
The converter is Plug-and-Play

Rear Panel
NO
Component
Function
1
YPbPr Output Port
From your YPbPr Display device plug into these
ports
2
SDI Output Port
From your SDI Display device plug into these ports
3
S-Video Output Port
From your S-Video Display device plug into these
ports
4
CVBS Output Port
From your CVBS Display device plug into these
ports
5
DVI-I Output Port
From your DVI-A or DVI-D Display device plug into
these ports
7
HDMI Output Port
From your HDMI Display device plug into these
ports
8
YPbPr Input Port
From your YPbPr Source plug into these ports
9
SDI Input Port
From your SDI Source plug into these ports
10
DVI-I Input Port
From your DVI-A or DVI-D Source plug into these
ports
11
S-Video Input Port
From your S-Video Source plug into these ports
12
CVBS Input Port
From your CVBS Source plug into these ports
13
HDMI Input Port
From your HDMI Source plug into these ports
14
Line in Input Port
From your L/R Audio Source plug into these ports
15
USB Port
Upgrade firmware/Control Mutli-Conveter Box
16
Power Jack
The Power adapter plug into here.
1
2
3
4
5
6
7
8
9
10
0
11
12
13
14
15
16

Front Panel
NO
Component
Function
1
Input Source
Select Input Source and LED indicate.
2
Output Ports
Select Output Port and LED indicate.
3
Signal indicate
When have signal, the LED is turn Green light else
is Red light.
4
Menu
Menu button
5
Format
Select output format
6
Audio
Select audio source( Embedded/Line in 1 and 2)
1
2
3
4
5
6
7

Button/LED Indicate
1. Input Source Mode:
LED 1
LED 2
LED 3
LED 4
HDMI
●
○
○
○
DVI-D
●
○
○
DVI-A
○
○
●
YPbPr
○
○
○
●
SDI
○
●
○
○
CVBS
○
○
●
○
S-Video
○
○
○
●
a. HDMI Input

b. DVI-D Input
c. DVI-A Input

d. YPbPr Input
e. SDI Input

f. CVBS Input
g. S-Video Input

2. Output Port Mode:
LED 1
LED 2
LED 3
LED 4
HDMI
●
○
○
○
DVI-D
○
●
○
○
DVI-A
○
○
●
YPbPr
○
○
○
●
SDI
○
●
○
○
CVBS +
S-Video
○
○
●
●
a. HDMI Output

b. DVI-D Output
c. DVI-A Output

d. YPbPr Output
e. SDI Output

f. CVBS + S-Video Output
3. Signal Locked Mode
LED
Locked
●
Un-Locked
●
3. Output Format Mode:

DVI-A Output
640x480 60Hz
●○○
○○●
800x600 60Hz
●○○
○○●
1024x768 60Hz
○●○
○○●
1280x720 60Hz
○●○
○○●
1280x1024 60Hz
○○●
○○●
1366x768 60Hz
○○●
○○●
1400x1050 60Hz
○○○
●○●
1600x1200 60Hz
○○○
●○●
1680x1050 60Hz
○○○
○●●
1920x1080 60Hz
○○○
○●●
Other Output
Port
720x480i (NTSC)
●○○
○○●
720x576i (PAL)
●○○
○○●
720x480p60
○●○
○○●
720x576p50
○●○
○○●

1280x720p60
○○●
○○●
1280x720p50
○○●
○○●
1920x1080i60
○○○
●○●
1920x1080i50
○○○
●○●
1920x1080p60
○○○
○●●
1920x1080p50
○○○
○●●
4. Audio Source Mode:
Audio Input
Embedded(Default)
●○○
○○●
Line 1
○●○
○○●
Line 2
○○●
○○●
Mute
○○○
●○●
5. Aspect Ratio Mode:
Hold on the autio button 3 until show the Func button Mode

Descritpion
Aspect
Ratio
16 : 9
4 : 3
1 : 1
Pan Scan 16 : 9

Installation
Multi-Converter Box installation consists of the following:
1. Disconnect +12DC adaptor to converter.
2. Connect Video Source to the Input Connector.
3. Connect Display Equipment to the output’s connector
4. Connect the +12DC adaptor to the converter.
Package Contents
The Multi-Converter package contains the following items:
User Manual x 1
+12 DC Adapter x 1
Mutli-Converter x 1

Specifications
DESCRIPTION
SDI Format
SD-SDI, HD-SDI & 3G-SDI
SDI Transition Rate
2.970Gb/s, 10485Gb/s and 270Mb/s
Audio Support
Stereo 2-Channel (L/R Audio)
Re-Sample Clock
Auto Resample audio clock to 48Khz
Coaxial Cable Type
RG6/RG59(75Ω)
Cable Equalization
3G: 100m of RG6/ 86m of RG59
HD: 170m of RG6/ 120m of RG59
SD: 400m of RG6/ 280m of RG59
*1 RG6: CANARE L-5CFB Cable / RG59: Belden 9275 Cable
*2 Cable Length Performance: Depending on SDI Signal and
Cable Quality
Input Format Support
Appendix Table A
Output Format Support
Appendix Table A
Firmware Updates
Via Mini-USB
Output Connector
2 x BNC [SDI]
3 x BNC [YPbPr]
3 x RCA [CVBS + LINE IN]
1 x DVI –I [DVI-D + DVI-A]
1 x HDMI
1 x S-Video
Input Connector
1 x BNC [SDI]
1 x DVI-I [DVI-D + DVI-A]
3 x BNC [YPbPr or YC + CVBS ]
3 x RCA [CVBS + LINE IN]
1 x Phone Jack
BNC Connector
3G 75 Ωinter-locked socket
USB Connector
B-Type
Bottom
Output Format/Input Source/Output Port/Audio Input
Housing
SECC
Dimension
L:235.9mm x W145.8mm x H:40.2mm
Power Source
Power Adapter: AC 100 ~ 240 V/DC (+6 ~ 15 V)

Operation Temperature
0~50°C [32~114°F]
Storage Temperature
-20~+60°C

Firmware Upload
Firmware is upgradable in the field using the integrated USB port
How to Firmware upgrade:
Step1.
Open Upload Firmware Program tools.exe and connect box to PC by USB Cable.
Step2.
Plug and un-plug “DC adapter” to power on/off the converter box (the
connection check status will be changed to “Connect”)