Z-Con RX15-3STS-1 Operating and maintenance manual
1Use PCtools to add the layout of "Adapter plug" with
preferred nomination, for example: Fan, then using
USB cable to connect PCtools and Smart remote
controller. Then long press the “SET” button of the
Smart remote controller to enter into the setting option.
After selecting “Data transmitting/importing”, please
press ”ON” button (or use Hotkey: SET + Up direction
button) as shown below to write the layout to the Smart
remote controller:
2Confirm that the Adapter plug is not connected to
supply mains, and its indicator light should not be on
at this stage. First remove the USB cover by using
the plus screw driver, and the Micro-B receiving port
of Adapter plug could be found；Connect the Smart
remote controller (Type A transmitting terminal) and
the corresponding Adapter plug (Micro-B receiving
terminal) simultaneously using the USB cable as
shown below.
●The product complies with NCC Administrative Regula-
tions on Low Power Radio Waves Radiated Devices：
Article 12：Without permission granted by the NCC,
any company, enterprise, or user is not allowed to
change frequency, enhance transmitting power or alter
original characteristic as well as performance to an
approved low power radio-frequency devices.
Article 14：The low power radio-frequency devices
shall not influence aircraft security and interfere legal
communications; If found, the user shall cease operating
immediately until no interference is achieved.
The said legal communications means radio communi-
cations is operated in compliance with the Telecommu-
nications Act. The low power radio-frequency devices
must be susceptible with the interference from legal
communications or ISM radio wave radiated devices.
●Indication of safety marks: If recommended precautions
and safe operating methods are not followed, physical
injury and damage of electrical appliances may be
caused.
Precautions for safe use
Adapter Plug/RX15-3STS-1
User Guide/Warranty
Package contains
●This product is for indoor use but not suitable for
outdoor use.
●Please use this product in dry condition instead of
exposing it in beads of water or in high humidity.
●Do not place this product near any equipment that
generates heat, such as heaters, electric heaters, gas
burners, or other heat-generating equipment.
●Do not disassemble the Adapter plug yourself.
●Do not use foreign objects to insert the Micro-B receiving
port of the Adapter plug.
●Please place and fix the Adapter plug properly to avoid
damage by collision and dropping from high place.
●Only one Adapter plug can be used for one circuit of the
Wall Outlet Socket. Neither the current loading over 15A
nor the power loading greater than 1,650W is allowed.
Connected or extended with other power strips for
extension is not allowed.
●If the Adapter plug is damaged or deformed, the Adapter
plug should be replaced.
●Do not use chemical/corrosive/solvent or bleach to clean
the Adapter plug as this may damage the housing of it.
Please wipe it with a dry and clean cloth.
Instructions of usage
Adapter Plug
Quick Instruction Manual
Components of Power Strip
Indicator light
Outlet socket
USB cover
Plug
PC-Tx Mode
Tx-Rx Mode
Tx-Tx TxSide
Tx-Tx RxSide
PC-Tx Mode
Import OK
Type-A-female connector
Micro-B connector
3After selecting the control point (for example: Fan) to
which you want to burn the Adapter plug, press the
“SET” button of the Smart remote controller to enter
into the setting option, select “Rx Burn” and press “ON”
button (or use Hotkey: SET + Down direction button).
The setting program will start automatically. When
the setting is completed, the screen of Smart remote
controller will display success and return to the layout
menu as shown below.
4Connecting the Adapter plug to the
Wall Outlet Socket and turn on the
power of electrical appliance, then
you can use the ON/OFF button of
Smart remote controller to control the
funtion of turning on/off of Adapter
plug respectively. When the Adapter
plug is turned "ON", the indicator light
displaying blue light represents correct
connection and outputting power. The
indicator light is not displayed instead
when the Outlet is turned "OFF". Please notice when
the indicator light is flashing which shows overloading
and the power supply will be cut off immediately.
Warranty term & product guarantee certicate
●With this product guarantee certificate, this product is
subject to limited one-year free repair service since the
date of purchase, but the warranty does not include
consumables (e.g. battery).
●Within the warranty period, damage caused by the
following conditions is not included under warranty. If
repairing is required, Team Young Technology Co.,
Adapter plug / RX15-3STS-1
AC 110V / 60Hz
AC 125V / 60Hz
Max. 1650W / Max. 15A
0~50℃
433.92MHz
Product
Name/Model
Working Voltage /
Frequency
Rated Voltage /
Frequency
Range of working
Temperature
Rated Load /
Current
Radio Frequency
About 112gNet Weight
H113.5* W65 * D54mmDimension
Product specications
*If the information of RoHS Compliance Declaration is required, please visit our
website at www.teamyoung.com
Ltd. or authorized distributors will charge the material,
inspecting, repairing, and administrative costs:
A. Without following the instruction of this Quick Instruction
Manual to install and operate the product or use unap-
proved accessories for the product.
B. Damage caused by irresistibly natural disaster, pest, rodent,
and human negligence.
C. Damage caused by misuse, abuse, vandalism, poor tem-
perature/humidity environment, without following instructed
power supply under rated voltage/current, or overload of
the product exceeding the rated voltage/current.
D. Failure and damage caused by transportation, movement,
dropping, and collision of product after purchasing.
E. Damage resulted from unauthorized disassembling of
EZCon®related products, which is not executed by
authorized distributors and technicians of manufacturer.
F. Using product in extreme environment of corrosion is also
excluded from warranty, such as in high temperature and
humidity, in sulfur areas, at the beach, and on the ship etc..
PC-Tx Mode
Tx-Rx Mode
Tx-Tx TxSide
Tx-Tx RxSide
PC-Tx Mode
Import OK
Adapter Plug
Electric Fan
5When the current is overloaded, the power will
be turned off immediately. There are two ways of
trouble-shooting：
Trouble-shooting I：❶Press the “OFF” button of the
Smart remote controller.
Trouble-shooting II：❶Unplug the Plug of Adapter
plug directly. Once this status is eliminated, the Adapter
plug can be resumed for use again.
＊For the detailed instruction for the pairing setting of PCtools/Smart remote
controller, please refer to the instruction manual of PCtools/Smart remote
controller.
＊When writing the layout, please make sure to confirm that the Power strip is
not connected to the supply mains to avoid danger.
Product Model
RX15-3STS-1
Name of Customer
/Company
Place of Purchase
Date of Purchase
Stamped by Distributor
/ Manufacturer
Product Batch
(Year of manufacture)
*The 5th~6th code of Product Batch indicates the year of manufacture, e.g. the year of manufacture for 912-18XXXXXXXX is 2018.
Product Guarantee Certificate
18th Floor, No. 400, Huanbei Road, Zhongli
District, Taoyuan City, Taiwan, R.O.C.
Tel : +886-3-2805160 Fax : +886-3-2805182
www.teamyoung.com
