Z-Wave EAP-402I User manual

Product profile
Product diagram
MANUAL FOR OUTDOOR PASSIVE INFRARED DETECTOR
Features
Leading world in 3D composite three-sensor detector
1.Infrared sensitivity jumper
8.Infrared sensor
Light sensing circuit
2.Infrared sensor
9.LED jumper
Patented hyperbolic precision temperature compensation
4.Pulse count jumper
11.Adjust the direction mode
Holographic anti-false positives
5.Infrared sensitivity jumper
12.Relay jumper
12.Relay jumper
Waterproof design
6.Tamper switch
13.Photosensitive element
13.Photosensitive element
15.Waterproof ring
Elegant appearance
Indoor and outdoor use
7.Relay
14.Infrared sensor
16.Terminal
16.Terminal
Technical parameters
Installation conditions
ASIC fuzzy logical digital analysis
3.Pulse count jumper
This product is a outdoor passive infrared detector with high
stability. It adopts three groups of high precision passive infrared
detection devices, advanced signal analysis, processing technologies
and provides high detection , false alarm immunity performance.
When the intruder passes through the detection area, the detector
will automatically detect the movement of human and sends alarm
signal to remind host. The product is suitable for mines,breeding
sites,family residential area, real estate villas, factories, shopping
centers, warehouses, office buildings and other places of security.
10.Red indicator
Supply voltage: DC 9-24V
Detection angle:6-9°
Detection range:12m*12m
Anti-white light: > 100,000LUX
Anti-EMI:>30V/M
LED indicator:when detecting movement of human
Static current: 45mA(general relay output) or 10mA
Alarm current:15mA
Self-test time: preheating 30 seconds
Sensors:three group of special low noise structure
Sensor sensitivity:4 optional
Installation height: 2.2m best
Alarm output:NC/NO, contacting capacity 100mA/DC30V
Tamper output: NC, contacting capacity 100mA/DC30V
Operating temperature: -40℃~60℃
Storage temperature:-45℃~70℃
Dimension：138mm*75mm*46mm
body, the red LED will light 3 seconds
(electronic relay output)
1.General guidance
Avoid minstallation with strong electric cable.
1.Infrared sensitivity jumper
2.Infrared sensor
4.Pulse count jumper
3.Pulse count jumper
5.Infrared sensitivity jumper
6.Tamper switch
7.Relay
8.Infrared sensor
9.LED jumper
10.Red indicator
11.Adjust the direction
mode
14.Infrared sensor
15.Waterproof ring
determined by this way.
When the path of intruder is vertical to the detector, the
detection sensitivity is high. Curtain detection range is

MANUAL FOR OUTDOOR PASSIVE INFRARED DETECTOR
2.Installation setting
3.Connecting power
4.The significance of indicator
5.Setting the working states
Let the indicator side up, the bottom flat against the wall,
fix the back slide board with screws,keep the distance between
detector and floor about 2.0~2.5m. If the detector needs to
adjust angle,you can choose SKY-U full-direction bracket.
Notes:I.the detection range will change with the detection angle
and height
II.the connected line should come out from the bottom of
the detector.The wiring hole port needs to put waterproof ring.
The detector enter into normal working status, after 30 seconds
self-test.
Detector detects intruder. The red LED lights for 3 seconds.
The detector alarms.
alarms after dusk.
When the button points to NIGHT mode, it means the
detector alarms in the evening.
6.Setting infrared pulse count jumper
I. The two sets of infrared sensitivity jumper 1&2
generally is set the same pulse count.
when jumper connects the 2 position, the pulse
count is 2.(defaulted 2)
II. Setting relay jumper
The defaulted setting is 3s. When the relay jumper is set to
3s, detector alarms, relay’movement keeps 3 seconds;When
the relay jumper is set to 20s, detector alarms, relay’movement
When the LED jumper connects and alarm, red LED indicator
lights;When the LED jumper disconnects and does not alarm,
red LED indicator does not light.
7.Wiring diagram
In the strong EMI environment,increase the number of pulse
counts and decrease the detection sensitivity.
The surface of installation needs to be strong,and stable,without
rocking.
I.Setting infrared sensitivity jumper
The two sets of infrared sensitivity jumper 1&2 generally is
set in the same location.(the defaulted setting is 6-~12m)
Jumper connects 9-18M position.The detector’s sensitivity
is 9-18M.
Jumper connects 6-12M position.The detector’s sensitivity
is 6-12M.
Jumper connects 5-9M position.The detector’s sensitivity
is 5-9M.
Jumper connects 3-6M position.The detector’s sensitivity
is3-6M.
II. Adjust the detection mode
When the button points to DAY mode, it means all-day alarm
mode
When the button points to NORMAL mode, it means the detector
when jumper connects the 1 position, the pulse
count is 1.
connect disconnect
keeps 20 seconds
Intrusion
alarm off
General electomagnetlc relay output Electronic solid-state relay output
Intrusion
alarm
Intrusion alarm
connected Tamper alarm
Tamper alarm

Precautions
When installed the detector, please do not drop or crack
detector, in case of doing damage to sensor and relay.
Increase the pulse count in strong EMI, RFI environment
Please do not touch the inner parts of detector
After finishing test, do not forget to reset detector into normal
working states
Walking test for detector periodically
Detection diagram
MANUAL FOR OUTDOOR PASSIVE INFRARED DETECTOR
8.Electronic solid-state relay output
When detector is far away from the control panel(such as several
hundred meters), using electronic solid-state relay output can
help reduce the line pressure drop. User can order electronic
solid-state relay output type
9.Walking test
Set all states of detector to the defaulted states
People walks into the detection area and moves. The detector detects
movements, then the red LED indicator lights 3 seconds
Check whether you demanded detection area is included in the
largest working detection area.If not, you can adjust the detector
location,angle or change jumper.