ZALMAN ZM-HE350 U3 User manual

User’s Manual
ZM-HE350 U3 / U3E
www.ZALMAN.com
Ver. 1.0
To ensure safe and easy installation,
please read the following precautions.
3.5”USB3.0 SuperSpeed
External HDD Enclosure

1
.COM
1. Precautions
2. Components
1) Be sure to check the product and its components before use. If there is any problem,
please consult your nearest purchase location.
2) Keep device away from areas with strong magnetic fields as HDD and data can be
damaged.
3) Do not connect the device to a computer unless the desktop and HDD is completely
assembled. Otherwise, it can damage the HDD and cause electrocution.
4) During operation, the HDD’s data can be damaged due to improper use. Be sure to back
up important data to a separate storage device. Zalman is not responsible for any data
loss which arises out of improper use.
5) When removing the device, be sure to follow the safe hardware removal procedure
according to the user’s OS. If the device is disconnected without safe removal, it may
damage the product, HDD, and data.
6) The HDD mounted on this product is fragile so be sure to avoid any shock to the device.
7) Please be aware that executing RAID Mode Change, Partition Change, or HDD Format
will delete all data stored on the HDD.
8) Lightning may cause fire from electric shock or short circuit. If the product will not be
used for a long time, be sure to unplug the device before storing it.
9) HDD related inquiries should be directed to the HDD manufacturer.
10) In order to use USB 3.0 function, you must have a USB 3.0 supported motherboard or
install a separate controller card before connecting USB 3.0 cable.
11) Zalman Tech is not responsible for any problem which arises from improper use.
12) Product design and specifications may be revised to improve quality and performance.
User’s Manual HDD Mounting Bolts
& Screw Driver
AC Adapter
HDD Case
USB3.0 Cable eSATA Cable
[Included Only for ZM-HE350 U3E]

2
.COM
1) Use the enclosed screw driver to unscrew the bolts on the rear cover.
Then remove the PCB from the external HDD case.
2) Connect the HDD to PCB’s SATA connector.
3. Installation
3) Use the HDD mounting bolts to fasten the HDD and PCB.

3
.COM
When fastening the screws, do not apply
strong force because it can wear the bolts.
Caution
5) Use the screws to fasten the rear cover to the external HDD
case.
3) Windows 98 / 98SE Driver Installation Instructions
1) Windows ME / 2000 / XP / VISTA / 7 Driver Installation Instructions
2) MAC OS 9.x or higher
The driver will install automatically when the external HDD case is turned
on and USB cable is connected.
The driver will install automatically when the external HDD case is turned
on and USB cable is connected.
Please refer to the website (www.zalman.com) for installation instructions.
4. Driver Installation
4) Insert the HDD-mounted PCB into the external HDD case.