ZALMAN ZM600-LE User manual

Users Manual
www.ZALMAN.com
※To ensure safe and easy installation, please read the following precautions.
Two Forward Switching
Power Supply
Ver. 131011
ZM600-LE

11
1. Warnings and Safety Precautions
2. Components
▶ Opening the cover of the product while the power cord is plugged into an
outlet may cause electrocution or critical damage to the product.
▶ Handling the power cord with wet hands may cause electrocution.
▶ Inserting fingers or metallic objects into the cooling fan may cause injury or
electrocution.
▶ Operating the product in an extremely cold or hot environment can degrade
product performance and lifespan.
▶ Exposure to liquids may cause malfunction.
▶ Operation in a humid or non-ventilated environment may reduce product lifespan.
▶ Plugging the main power connector P1 into the motherboard while the product is
connected to the AC power source may cause damage to the motherboard.
▶ Make sure that the connectors are connected to their designated locations, and that
the connectors are not oriented in the wrong direction when connecting the DC
output connectors.
▶ Please use gloves to prevent injuries during installation.
▶ Product designs and specifications may be revised without prior notification to
improve quality and performance.
Neglecting the following may cause serious injury or death.
Neglecting the following may cause minor injuries, degrade product
conditions or cause malfunction.
Caution
Warning
Power Supply
AC Power Cord
Four Screw Five Cable Ties
User’s Manual
Disclaimer)
Zalman Tech Co., Ltd. is not responsible for any damages due to external causes,
including but not limited to, improper use, problems with electrical power, accident,
neglect, alteration, repair,improper installation, or improper testing.

22
3. Specifications
1)ZM600-LE Electrical & Physical Specifications
2) ZM600-LE Cable Specifications
AC Input Range Voltage 220VAC Vout Output Load Rating Combined Combined
Power
Frequency 47Hz ~ 63㎐ Imin Imax Ipeak
AC Input Current 115VAC - +3.3V 0.1A 24A 130W
600W
220VAC 5A +5V 0.2A 20A
PFC Type None PFC +12V1 0.1A 28A 540W
Power Factor Correction Max 50% +12V2 0.5A 28A
Inrush Current Limit
(@ Cold Start at 25℃)
115VAC - -12V 0.0A 0.3A 3.6W
220VAC Max 100A +5VSB 0.0A 2.0A 2.5A 10W
Efficiency Max 82% @220VAC, Typical load Ambient Temperature
DC Output Voltage
Regulation
Vout Typical load
At
Full
Load
Operation 0 ~ +40℃
+3.3VDC ±5% +3.14 ~ +3.47V Stored -20 ~ +70℃
+5VDC ±5% +4.75 ~ +5.25V Ambient Humidity
+12V1DC ±5% +11.4 ~ +12.6V Operation 5% ~ 85% RH
+12V2DC ±5% +11.4 ~ +12.6V Stored 5% ~ 95% RH
-12VDC ±10% -10.8 ~ -13.0V Product Dimensions
+5VSB ±5% +4.75 ~ +5.25V 140 (L) * 150 (W) * 86 (H) mm
DC Output Ripple
& Noise
Vout Standard Range
At
Full
Load
Product Weight
+3.3VDC 50mV 1.85 kg (Full Package)
+5VDC 50mV Protection Funtions
+12V1DC 120mV Over-Voltage Protection (OVP)
+12V2DC 120mV Under-Voltage Protection (UVP)
-12VDC 120mV Short- Cicuit Protection (SCP)
+5VSB 50mV Over-Power Protection (OPP)
PCI Express2
Power Connector
PCI Express1
Power Connector
Mainboard Power Connector
CPU Power Connector
S-ATA Power Connector
S-ATA Power Connector
S-ATA Power Connector
S-ATA Power Connector
S-ATA Power Connector
ODD/HDD Power Connector
S-ATA Power Connector
ODD/HDD Power Connector
ODD/HDD Power Connector
FDD Power Connector

33
4. Certifications