Zanussi Zhc 950 User manual

COOKER HOOD

ZHC 950

INSTRUCTION BOOKLET

Customer Care Department

Zanussi

55 - 77 High Street

Slough

Berkshire

SL1 1DZ Tel: 08705 727 727

To register ownership, please ensure you complete and return the guarantee card

supplied with the appliance.

Thank you for buying a Zanussi product.

To enable you to use your appliance effectively and safely, please read this instruction

book carefully before using the appliance and retain for future reference. If you require

guidance in the use of the appliance or require further information on Zanussi Products,

please contact our Customer Care Department.

For the Installer

Technical Information

Electrical Connection

Electrical Requirements

Electrical Connection

Installing the Cooker Hood

Installation Requirements

Unpacking

Clearance Heights

Fitting the Wall Brackets

Fitting the Canopy Hood

Venting

Recirculation

Fitting the Chimney Stack

To register ownership, please ensure you

complete and return the guarantee card

supplied with the appliance.

Guide to use the instruction book

The following Symbols will be found in the text to guide you through the instruction book

Safety instructions Step by step instructions

For the User

Important Safety Information

Your Appliance

Operating Instructions

Cooker Hood Controls

To Operate

Recirculation

Extraction

Maintenance and Cleaning

External Cleaning

Metal Grease Filters

Charcoal Filters

To Remove/Replace the Charcoal

Filters

Changing the Light Bulb

Something Not Working

Service and Spare Parts

Guarantee Conditions

These warnings are provided in the interests of safety. Ensure that you understand

them all before installing or using this appliance. Your safety is of paramount impor-

tance. If you are unsure about any of the meanings of these warnings contact the

Customer Care Department.

•Installation

•Any installation work must be undertaken

by a qualified electrician or a competent

person.

•This hood must be installed in accordance

with the installation instructions and all

measurements must be adhered to.

•If the cooker hood is installed for use above

a gas appliance then the provision for

ventilation must be in accordance with the

Gas Safety Codes of Practice BS.6172,

BS.5440 and BS.6891 (Natural Gas) and

BS.5482 (LP Gas) 1994, the Gas Safety

(Installation & Use) Regulations, the

Building Regulations issued by the

Department of the Environment, the

Building Standards (Scotland)

(Consolidated) Regulations issued by the

Scottish Development Department.

•The fan motor of this cooker hood

incorporates a cut-out device which will

operate if the cooker hood is installed

below the minimum height recommended

under the section ‘Clearance Height’, or if

the motor becomes overheated. If the cut-

out device is activated, switch off the fan

motor and allow the cooker hood to cool.

The cut-out device will reset itself when the

fan motor has cooled significantly.

•It is dangerous to alter the specifications or

modify this product in any way.

•When installed between adjoining wall

cabinets the wall cabinets must not

overhang the hob.

•If the room where the cooker hood is to be

used contains a fuel burning appliance

such as a central heating boiler then its flue

must be of the room sealed or balanced

flue type.

•If other types of flue or appliances are fitted

ensure that there is an adequate supply of

air to the room.

•The ducting system for this appliance must

not be connected to any existing ventilation

system which is being used for any other

purpose.

•Do not install above a cooker with a high-

level grill.

•Child Safety

•This appliance is designed to be operated

by adults. Children should not be allowed

to tamper with the appliance.

•During Use

•This product is for domestic use only.

•Never leave frying pans unattended during

use as overheated fats and oils might

catch fire.

•Never do flambé cooking under this cooker

hood.

•Do not leave naked flames under the

cooker hood.

•Maintenance and Service

•This appliance can be a hazard if the

grease filters and charcoal filters are not

cleaned and replaced as recommended.

•Under no circumstances should you

attempt to repair the appliance yourself.

Repairs carried out by inexperienced

persons may cause injury or more serious

malfunction. Refer to your local Zanussi

Service Force Centre. Always insist on

genuine spare parts.

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

IMPORTANT SAFETY INFORMATION

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

YOUR APPLIANCE

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

OPERATING INSTRUCTIONS

This cooker hood is designed to extract

unpleasant odours from the kitchen, it

will not extract steam.

Cooker Hood Controls

The cooker hood functions are controlled by

four push button switches located centrally in

the control fascia.

LTurns the worktop lighting On and Off

SMains light - illumination indicates fan

motor is running

V1 Turns the fan motor On and Off at low

speed, suitable for one pan or when

simmering.

V2 Medium fan speed, suitable for use

when cooking with a number of pots

and pans.

V3 Maximum fan speed, suitable for

cooking foods with strong odours.

260

300

126 63

740

MIN.870-MAX.1200

420

520

530

598-898

V1 V2 V3

To Operate

Select the required fan speed and light if required.

The appliance can be installed to recirculate or

extract contaminated air. The cooker hood is more

effective when used in the extraction mode.

Recirculation

The cooker hood is supplied specified for use in the

recirculation mode with the charcoal filter fitted.

In the recirculation mode the contaminated air is

passed through the charcoal filters to be purified

and recirculated into the kitchen through the

recirculation grilles in either side of the chimney

stack.

Extraction

In the extraction mode the contaminated air enters

the cooker hood passing through the grease filters

and is passed out through the ducting into the

atmosphere.

To obtain the best performance when cooking it is

advisable to switch the cooker hood on for a few

minutes before you start cooking and leave it

running for about 15 minutes after finishing.

When used in the extraction mode the

charcoal filters are not required.

Never do flambé cooking under this

cooker hood.

Never leave frying pans unattended during

use as overheated fats and oils can catch

fire.

Do not leave naked flames under the cooker

hood.

Ensure heating areas on your hob are

covered with pots and pans when using the

hob and cooker hood simultaneously.

Before carrying out any maintenance or

cleaning isolate the cooker hood from the

mains supply.

The cooker hood must be kept clean, as a

build up of grease or fat can be a fire

hazard.

External Cleaning

Wipe the cooker hood frequently with warm soapy

water using a mild detergent.

Never use scouring pads or abrasive

cleaners.

Never use excessive amounts of water

when cleaning particularly around the

control panel.

Metal Grease Filters

The grease filters absorb grease and dust during

cooking to help keep the cooker hood clean inside.

Cleaning

The filters must be washed once every

month, using a normal household

detergent; their compact dimension also

enables them to be washed in a

dishwasher. Allow to dry completely

before replacing.

Removing and replacing the filters

Remove the filters one at a time, press

against the metal actuator to release the

spring catch as illustrated. When

replacing, ensure that the handles face

outwards.

Charcoal Filter

In the recirculation mode the charcoal filter

absorbs smells and unwanted odours.

The charcoal filter cannot be cleaned or

regenerated, and must be replaced approximately

every 4 months, or more frequently if the hood is

subjected to heavy usage.

Replacing the charcoal filter

First remove the metal grease filters.

Remove the saturated activated charcoal

filter by releasing the fixing hooks as

illustrated.

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

MAINTENANCE AND CLEANING

Position the new charcoal filter in the

position marked and while holding the

filter replace the fixing hooks as

illustrated.

This appliance can be a possible fire

hazard if the grease and charcoal

filters are not cleaned and replaced as

recommended.

Changing the Light Bulb

Remove the screw fixing the lighting

support.

Pull the lighting support downwards.

Remove the light bulb by unscrewing it

anticlockwise.

Insert the new light bulb into the lighting

support and screw it clockwise taking

care not to overtighten the light bulb.

If one of the light bulbs has failed to function

check that the lamps is fully screwed into the

lighting support. If lamp failure has occurred

then it should be replaced with a 40W clear

cylindrical lamp with an E14 screw cap.

Replacement filters and light bulbs can

be obtained from your local Service

Force Centre.

If, having followed these instructions carefully, your cooker hood fails to work properly please

carry out the following checks.

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

SOMETHING NOT WORKING

Symptom

The cooker hood will not start

The cooker hood is not working effectively

•Check the hood is connected to the

electricity supply.

•Make sure the switch is in the ‘ON’ position.

•The fan speed is set high enough for the

task.

•The grease filter is clean.

•The kitchen is adequately vented to allow

the entry of fresh air.

•If set up for recirculation, check that the

charcoal filter is still effective.

•If set up for extraction, check that the

ducting outlets are not blocked.

Solution

The cooker hood has switched off during

operation •The safety cut-out device has been tripped.

•Turn off the hob and then wait for the

device to reset.

If after all these checks, the fault persists,

contact your local Service Force Centre, quoting

the model and serial number.

Please note that it will be necessary to provide

proof of purchase for any in-guarantee service

calls.

In-guarantee customers should ensure

that the above checks have been made

as the engineer will make a charge if

the fault is not a mechanical or electrical

breakdown.

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

SERVICEANDSPAREPARTS

If you require an engineer or spare parts

contact your local Service Force Centre by

telephoning:

08705 929929

Your telephone call will be routed to your local

Service Force Centre.

For general assistance with your appliance or

for further information on Zanussi products

please contact our Customer Care Department at

the address below or visit our website at:

www.zanussi.co.uk

Customer Care Department

Zanussi

55 - 77 High Street

Slough

Berkshire

SL1 1DZ

Telephone: 08705 727 727*

* calls to this number may be recorded for

training purposes.

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

GUARANTEE CONDITIONS

We, Zanussi, undertake that if within twenty four months of the date of the purchase this Electrolux

built-in product or any part thereof is proved to be defective by reason only of faulty workmanship or

materials, the company will, at our option repair or replace the same FREE OF ANY CHARGE for

labour, materials or carriage on condition that:

•The appliance has been correctly installed and used only on the electrical supply stated on the

rating plate.

•The appliance has been used for normal domestic purposes only, and in accordance with the

manufacturer’s operating and maintenance instructions.

•The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any

person not authorised by us.

•All service work under this guarantee must be undertaken by a Zanussi Service Force Centre.

•Any appliance or defective part replaced shall become the property of this company.

Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available

outside these hours in which case a premium will be charged.

EXCLUSIONS

This Guarantee does not cover:

•Damage or calls resulting from transportation, improper use or neglect, the replacement of any

lamps or removable parts of glass or plastic.

•Costs incurred for calls to put right appliances improperly installed or calls to appliances outside

the United Kingdom.

•Appliances found to be in use within a commercial environment, plus those which are the subject

of rental agreements.

•Products of Zanussi manufacture which are not marked by Zanussi.

This guarantee is in addition to your statutory and legal rights.

ZANUSSI EUROPEAN GUARANTEE

If you should move to another country within Europe then your guarantee moves with you to your new

home subject to the following qualifications:

•The guarantee starts from the date you first purchased the product.

•The guarantee is for the same period and to the same extent for labour and parts as exists in the

new country of use for this brand or range of products.

•This guarantee relates to you and cannot be transferred to another user.

•Your new home is within the European Community (EC) or European Free Trade Area.

•The product is installed and used in accordance with our instructions and is only used

domestically, i.e. a normal household.

Before you move please contact your nearest Customer Care Centre, listed below, to give

them detailsof your new home. They will then ensure that the local Service Organisation is

aware of your move and able to look after you and your appliances.

France Senlis +33 (0)3 44 62 22 22

Germany Nurnberg +49 (0)911 323 2600

Italy Pordenone +39 (0)1678 47053

Sweden Stockholm +46 (0)20 78 77 50

UnitedKingdom Slough +44 (0)1753 219897

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

INSTALLATION INSTRUCTIONS

It is dangerous to alter the specifications or attempt to modify this product in any way.

Technical information

DIMENSIONS HEIGHTOFCANOPY: (incl glass visor) 52mm

HEIGHTOFCHIMNEY: (UPPERSECTION) 465mm

(LOWERSECTION) 740mm

WIDTHOFCANOPY: (incl glass visor) 898mm

DEPTHOFCANOPY: (incl glass visor) 520mm

ELECTRICALSUPPLY VOLTAGE: (~50Hz) 220-240V

POWERCONSUMPTION: 230W

FANMOTOR: 150W

LAMPS: (2 x40W) 80W

SUITABLE FOR -

INSTALLATIONABOVE: ELECTRIC HOB: 7KW (MAX)

GAS HOB: 10KW (MAX)

SLOT-IN ELECTRIC COOKER: 12.4KW (MAX)

SLOT-IN GAS COOKER: 13.5KW (MAX)

THIS APPLIANCE MUST BE EARTHED

Electrical Requirements

Any permanent electrical installation must

comply with the latest I.E.E. Regulations and

local Electricity Board regulations. For your own

safety this should be undertaken by a qualified

electrician e.g. your local Electricity Board, or a

contractor who is on the roll of the National

Inspection Council for Electrical Installation

Contracting (NICEIC).

Electrical Connection

Before connecting to the mains supply ensure

that the mains voltage corresponds to the

voltage on the rating plate inside the cooker

hood.

Note: CE Marking certifies that this appliance complies with the

requirements laid down in EEC directive 89:336 (Electromagnetic

compatibility) and subsequent modifications and Low Votage directive

72/23/E.

This appliance is fitted with a 3 core mains

cable and must be permanently connected to

the electricity supply via a double-pole switch

having 3mm minimum contact gap on each

pole. A Switched Fuse Connection Unit to

BS.1363 Part 4, fitted with a 3 Amp fuse, is a

recommended mains supply connection

accessory to ensure compliance with the

Safety Requirements applicable to fixed

wiring instructions.

This appliance conforms to BS.800:1988 and

EEC Directive No. 78 308 regarding

suppression of radio and television

interference.

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

INSTALLING THE COOKER HOOD

Please ensure that when the appliance

is installed it is easily accessible to an

engineer in the event of a breakdown.

All installations must comply with the

local authorities requirements for the

discharge of exhaust air.

Incorrect installation may affect the

safety of this cooker hood.

Installation Requirements

Before installation check that the wall

to which the cooker hood is to be

fitted for electric cables, water pipes

and gas.

This cooker hood is designed to be fixed to

any vertical surface over a cooking area, and

can be used in the extraction (ducted to the

outside) or recirculation mode.

The installation work must be undertaken by a

qualified and competent person.

The manufacturer disclaims any responsibility for

damage due to incorrect installation of the cooker

hood or if the hood is not installed in compliance

with relevant regulations controlling this type of

installation.

Unpacking

The hood is supplied with the following

components for installation as illustrated.

Item Qty Description

1 1 Hood body, complete with:

Controls, lighting, blower and filters

2 1 Telescopic chimney comprising:

2.1 1 Upper section

2.2 1 Lower section

3. 1 Ø120-125mm Ducting collar

9 1 Ø150-120mm Ducting spigot

14.1 2 Recirculation outlet ducting

extension

15 1 Recirculation outlet connection

7.2.1 2 Upper chimney fixing brackets

7.3 1 Reciruation outlet support

11. 6 Rawl plugs

12a 6 4.2x44.4mm wall fixing screws

12c 6 2.9x9.5mm chimney fixing screws

1 Instruction Manual

2.1

2.2

12c

12a 7.2.1 11

12a

7.3

14.1

Clearance Heights

The cooker hood is designed to be fitted over a

cooking appliance at the clearance heights stated,

providing the maximum output of the appliance

beneath does not exceed the maximums quoted in

the Technical Specifications.

If the output of the appliance below the cooker

hood exceeds the maximum outputs quoted,

please refer to the cooker manufacturer’s

installation instructions.

A minimum clearance height of 650mm (25½ins)

is required when installed above a built-in electric

hob, or 700mm (27½ins) when installed above a

built-in gas hob.

A minimum clearance height of 685mm (27ins) is

required when installing above a slot-in electric

cooker, or 787mm (30½ins) when installed above

a slot-in cooker.

When installed between adjoining wall cabinets,

the wall cabinets must not overhang the hob and

the distance between the underside of the cabinet

and the worktop must be 450mmm (17¾ins), a

gap of 50mm (2ins) must be maintained either

side of the hob.

This cooker hood must not be installed

above a cooking appliance with a high

level grill.

The hood can be installed above these heights

but for optimum performance it should be installed

at the distances quoted for the appropriate heat

source.

Fix the lower bracket item 7.2.1 using

two 4.2x44.4 wall fixing screws item

12a.

Fix the upper fixing bracket item 7.2.1

and the recirulation outlet support item

7.3 together using two 4.2x44.4mm

wall fixing screws item 12a as

illustrated.

Insert two 4.2x44.4mm wall fixing

screws item 12a into the two holes

116mm either side of the vertical line

and tighten leaving a space between

the underside of the screwhead and

the wall of 5-6mm.

Note: If the hood is to be

installed onto a hollow

construction or plaster or

partition board wall then special

fixing screws will be required

(not supplied).

Fitting the Wall Brackets

Draw a vertical line on the wall, from the

centre of the cooking appliance up to the

ceiling, or as high as is practical using a

spirit level and mark pen. This is to

ensure the correct vertical alignment of

the appliance.

Draw a horizontal line through the

vertical at 650mm above the hob.

Place the first bracket item 7.2.1 on the

wall 1 or 2mm from the ceiling or the

upper limit as shown aligning the notch in

the centre with the vertical line.

Mark the wall bracket hole centres on

the wall ready for drilling.

Place the second bracket item 7.2.1 on

the wall at X below the first bracket as

shown aligning the notch in the centre

with the vertical line.

(X is determined by the height of the

upper chimney supplied).

Mark the wall bracket hole centres on

the wall ready for drilling.

Draw a horizontal line through the

vertical at 306mm above the hob and

mark two hole centres at 116mm either

side of the vetical line.

Drill the holes for the fixing screws using

an 8mm masonry drill and insert the 6

rawl plugs item 11.

12a

306 X

116

1÷2

116

650 min.

7.2.1

Fitting the Hood Body

Before starting to fix the hood body,

tighten the two screws Vr located on

the top of the hood body.

Hook the hood body onto the two

4.2x44.4mm screws item 12a.

Fully tighten the screws item 12a.

Using a screw driver and spirit level,

adjust the screws item Vr until the

hood body is level.

Extraction

The cooker hood is more effective when used

in the extraction mode (ducted to the outside).

Venting kits may be purchased through

your retailer or DIY store, and must be

ducted to an outside vent of Ø125mm (5”)

or Ø150mm (6”).

The ducting used must be manufactured

from fire retardent material conforming to the

relevant British Standard or DIN 4102-B1.

When the cooker hood is ducted to the outside

the charcoal filter must be removed.

Recirculation

The cooker hood is supplied specified for use in

the recirculation mode, with the charcoal filter

fitted.

In the recirculation mode contaminated air is

passed through the charcoal filter to be purified

and recirculated into the kitchen through the

grille outlets on either side of the chimney.

To assemble the recirculation duct, place the

recirculation outlet connection item 15 into the

support item 7.3.

Insert the extension ducts item 14.1 into either

side of the recirculation outlet item 15 ensuring

the connections are vertically and horizontally

aligned with the outlets in the chimney.

Connect the recirculation oulet item 15 to the

outlet on top of the hood body using either a

piece of Ø125mm or Ø150mm flexible or rigid

pipe.

Rigid pipe is strongly recommended and should

be used where possible as this will ensure the

best performance while lowering noise.

ø 150

14.1

12a

Extraction

The charcoal filter is not required in this mode

and should be removed.

Ducting

The ducting used must be Ø150mm (6ins), or

Ø125mm (5ins) in diameter.

If possible duct through the wall immediately

above the hood body.

For the best performance use the shortest

possible duct run and the minimum number of

bends.

Where flexible ducting is fitted it should not be

turned through very tight bends as this may

impair the performance of the hood.

It is recommenmded a maximum length of 3

metres, to be installed, to be reduced 1 metre for

each 90obend installed in the ducting run.

If the distance is greater than 3 metres the

efficency of the hood could be impaired.

The diameter of the ducting spigot on the top of

the hood body item 1 is Ø150mm (6”).

When using Ø125mm (5”) ducting it will be

necessary to install the ducting adapter item 9 to

the Ø150mm (6”) outlet on the top of the hood

body and the Ø120mm to 125mm ducting collar

item 3 (supplied).

If the room where the cooker hood is to

be used contains a fuel burning appliance

such as a central heating boiler, then its

flue must be of the room sealed or

balanced flue type.

If other types of flue or appliances are

fitted ensure that there is an adequate

supply of air to the room.

The cooker ducting (extraction mode)

must never be connected to central

heating flues, radiators or water heaters

etc.

Electrical Connection and Working

Test

Before fitting the chimney to the canopy make

the electrical connection as described in the

sectiontitled “ELECTRICALCONNECTION”.

When the electrical connection has been made,

test the three speed fan and worktop

illumination.

ø 120ø 150

Fitting the Chimney Stack

The chimney consists of two sections.

The lower chimney measures 740mm

and the upper chimney (with the

recirculation grilles on either side)

measures 465mm. The overall installed

measurement is min. 870 - max 1200mm.

UPPERCHIMNEY

To fit the upper chimney section item 2.1

expand the chimney slightly to allow it to

be fitted over the brackets item 7.2.1 as

illustrated.

When installed in the recirculation mode

ensure that the recirculation ducting

outlet extension pieces item 14.1 align

correctly with the outlet grilles in the

chimney.

Secure the sides of the chimney to the

brackets using the four screws item

12c (2.9x9.5mm) provided, as illustrated.

LOWERCHIMNEY

To fit the lower chimney section item 2.2

expand the chimney slightly to allow it to

be fitted over the upper chimney item

2.1 and the hood body item 1 as

illustrated.

Secure the sides of the chimney to the

hood body using the two screws item

12c (2.9x9.5mm) provided, as illustrated.

12c

2.1

2.2

7.2.1

12c

436001681 01 - 030210

Other manuals for ZHC 950

Table of contents

Other Zanussi Ventilation Hood manuals

Zanussi

Zanussi ZHC 62641 User manual

Zanussi

Zanussi Block 642205 User manual

Zanussi

Zanussi ZHG51251G User manual

Zanussi

Zanussi ZHP60260WA User manual

Zanussi

Zanussi ZFVX19K User manual

Zanussi

Zanussi ZHB 60460 XA User manual

Zanussi

Zanussi ZB 960 User manual

Zanussi

Zanussi ZHC9131X User manual

Zanussi

Zanussi Supertredil 641257 User manual

Zanussi

Zanussi ZHI612G User manual

Zanussi

Zanussi ZHS92450XA User manual

Zanussi

Zanussi ZHC 605 User manual

Zanussi

Zanussi ZHC 929 X Manual

Zanussi

Zanussi ZB 350 User manual

Zanussi

Zanussi ZHC 62462 XA User manual

Zanussi

Zanussi ZHP 60260 WA User manual

Zanussi

Zanussi Supertredil 640042 User manual

Zanussi

Zanussi ZHC906XM User manual

Zanussi

Zanussi ZFV916Y User manual

Zanussi

Zanussi ZH 6021 User manual

Zanussi

Zanussi ZHT 600 Instructions for use

Zanussi

Zanussi IH6013F User manual

Zanussi

Zanussi ZHG713G User manual

Zanussi

Zanussi ZHP62370XA User manual

Popular Ventilation Hood manuals by other brands

FOTILE

FOTILE JQG7501 user manual

STERLING FANS

STERLING FANS SED110M manual

Whirlpool

Whirlpool GXW7330DXS0 Installation Instructions and Use & Care Guide

Bosch

Bosch Rexroth Tightening System 350 manual

Broan

Broan Best WC26I owner's manual

Jenn-Air

Jenn-Air 36" Installation Instructions and Use & Care Guide

ETNA

ETNA A4400TRVS/E02 User instructions

AEG

AEG 8000 Series user manual

Greenheck

Greenheck PN 458294 Installation, operation and maintenance manual

Franke

Franke FCMY 90 C WHG A 2B user manual

Halton

Halton Rex Expander Installation and maintenance guide

Klimawent

Klimawent ALAN-U/C-8-N Use and maintenance manual

Esatto

Esatto ERF60S quick start guide

Electrolux

Electrolux Icon E368WV60ES Specification sheet

Fujioh

Fujioh FR-CL1890VP Operation manual

Gaggenau

Gaggenau AH 360-720 Operating and assembly instructions

GE Appliances CV936 Owner's manual and installation instructions

Broan

Broan EPD61 SERIES installation instructions

Zanussi ZHC 950 User manual

Popular Ventilation Hood manuals by other brands