Zavio B7210 User manual

1
Content
Safety Instruction............................................................................................................................................................2
Minimum System Requirement & Product Feature....................................................................................................4
Minimum System Requirement ....................................................................................................................................4
Product Feature..............................................................................................................................................5
Main Page........................................................................................................................................................................6
Basic Setup........................................................................................................................................................9
Account..........................................................................................................................................................9
Network........................................................................................................................................................10
Date Time.....................................................................................................................................................14
Video............................................................................................................................................................15
Audio............................................................................................................................................................18
Live View.........................................................................................................................................................19
Video............................................................................................................................................................19
Audio............................................................................................................................................................19
Camera Setting.............................................................................................................................................19
PTZ Control.................................................................................................................................................21
Playback..........................................................................................................................................................22
Client PC......................................................................................................................................................22
Network Storage ..........................................................................................................................................23
Local Storage...............................................................................................................................................23
Event................................................................................................................................................................24
Event Server.................................................................................................................................................24
Event List.....................................................................................................................................................24
Motion Detection.........................................................................................................................................26
Audio Detection...........................................................................................................................................26
Tampering Detection....................................................................................................................................27
Schedule.......................................................................................................................................................27
System .............................................................................................................................................................28
Maintenance.................................................................................................................................................28
Date Time.....................................................................................................................................................28
Security........................................................................................................................................................28
Network Basic..............................................................................................................................................29
Network Advanced.......................................................................................................................................29
LED..............................................................................................................................................................31
System Log ..................................................................................................................................................31

2
User Manual
Safety Instruction
Before you use this product
This product has been designed with safety in mind. However, the electrical products can cause fires which
may lead to serious body injury if it is not used properly. To avoid such accidents, be sure to heed the
following.
Legal Caution
Video and audio surveillance can be forbidden by laws that vary from country to country. Check the laws in
your local region before using this product for surveillance purposes.
Don't open the housing of the product
Don't try to open the housing or remove the covers which may expose yourself to dangerous voltage or other
hazards.
Don't use the accessories not recommend by the manufacturer
Heed the safety precautions
Be sure to follow the general safety precautions and the “Operation Notice.”
Operation Notice - Operating or storage location
Avoid operating or storing the camera in the following locations:
Extremely hot or cold places
(Operating temperature: 0 °C to + 40 °C [32 °F to 104°F] )
Exposed to direct sunlight for a long time, or close to heating equipment (e.g., near heaters)
Close to water (e.g.,near a bathtub, kitchen sink, laundry tub)
Close to sources of strong magnetism
Close to sources of powerful electromagnetic radiation, such as radios or TV transmitters
Locations subject to strong vibration or shock
In case of a breakdown

3
In case of system breakdown, discontinue use and contact your authorized dealer.
In case of abnormal operation
If the unit emits smoke or an unusual smell,
If water or other foreign objects enter the cabinet.
If you drop the unit or damage the cabinet:1 Disconnect the cable and the connecting cables. 2 Contact
your authorized dealer or the store where you purchased the product.
Transportation
When transporting the camera, repack it as originally packed at the factory or in materials of equal quality.
Ventilation
To prevent heat buildup, do not block air circulation around the device.
Cleaning
Use a soft, dry cloth to clean the external surfaces of the device. Stubborn stains can be removed using
a soft cloth dampened with a small quantity of detergent solution, then wipe dry.
Do not use volatile solvents such as alcohol, benzene or thinners as they may damage the surface.

4
Minimum System Requirement & Product Feature
System Requirement
For normal operation and viewing of the network camera, it’s recommended that your
system meet these minimum requirements for proper operation:
Item
Requirements
CPU
Minimum Intel® Core 2 Duo or higher (Core i3 or above is
recommended)
Graphic Card
256 MB RAM graphic cards
(or equivalent on-board graphic cards)
RAM
Minimum 1 GB of RAM,(2GB or above is recommended)
Operating
System
Window 2000, 2003, XP, Vista or Windows 7
Mac OS Leopard 10.5
Web Browser
Internet Explorer 6 or later
Note:
1. If using Windows 98 or Windows ME, please install IP Installer before using WEB UI to ensure the system
runs normally.
2. If not able to view the recorded video file, please install Xvid codec while installing Intelligent IP Installer.
(For Windows 98, ME or 2000 server, the codec might not work properly. Please download Xvid codec 1.0
from the internet.)
3. Please keep updating the latest Windows software and service package. (Ex: Net Framework, Windows
Media Player, Enhance ActiveX Security)

5
Product Features
SYSTEM
Resolutions
H.264 / MPEG-4 / Motion JPEG:
Screen Resolution
Higher than 1024 * 720 pixels
Compressing format
H.264 / MPEG-4 / Motion JPEG
Frame Rate
Up to 30 fps at 1920x1080
Image settings
Rotation: Mirror, Flip, Mirror Flip
Brightness / Contrast / Saturation
Overlay capabilities: time, date, text and privacy image
Image snapshot
Yes
Video Recording
Yes
Full Screen Viewing
Yes
Digital Zoom
10x digital
Audio
Two-way (full / half duplex)
Audio compression: G.711 μ law, a law, and AMR
Mobile Phone Live
View
Through 2.5 WAP
Alarm Sending
FTP Client / SMTP / Network Storage / HTTP Event
Security
Password Protection / HTTPS encryption / IP Filter
Alarm Buffer
Input: alarm buffer, motion detection, audio detection
Output: network storage, FTP, SMTP, Pre-and post alarm buffer
Supported protocols
Bonjour, TCP/IP, DHCP, PPPoE, ARP, ICMP, FTP, SMTP, DNS,
NTP, UPnP, RTSP, RTP, RTCP, HTTP, TCP, UDP, 3GPP/ISMA
RTSP
Simultaneous
Connection
Up to 10 users
Operating conditions
-40℃~ 60℃(-40℉~ 140℉)
HARDWARE
Lens
F1.2, 3 ~ 9mm, vari-focal, auto-iris
Local Storage
Support MicroSD card
DI/DO
2
Power
12V DC, 1.5A
NETWORK
Ethernet
10 / 100 Base T

6
Main Page
Toolbar of Main Page

7
Profile
Click the drop-down menu to choose video compression mode of Live
View among H.264, MPEG-4, MJPEG and H.264.
Note: As long as the operating system is not able to afford loading under
H.264 mode, please downgrade the mode to MPEG-4 or MJPEG.
View Size
Select the desired view size of image resolution between Fit
Screen and Full Screen.
Protocol Select the transferring protocol among TCP, UDP, and HTTP.
Video Buffer
Turn the Video Buffer function On / Off. The Video Buffer function
makes the streaming more smoothly in unsteady network environment,
but might cause a little delay in live view.
Client Setting

8
PTZ
Click the Home button and it brings you back to the center no matter what position you are
at.
Move the camera view to the direction that the various arrows you click on.
Preset
Use the various direction arrows to steer the camera view to the required position，and name
it for the specified position.
Patrol
Before starting this function, it requires to specify Guard tour settings in the Setting

9
Basic Setup
Account
Account List
The device default account and password setting is “admin / admin”. That means everyone who knows IP
address can access the device including all configuration. It is necessary to create a new password if the device
is intended to be accessed by specific ones.
Click “Add”to create the accounts to the specific users. There are 1 default account and 9 accounts that you
may assign 3 different viewer modes as you wish. The instruction of 3 viewer modes listed as below:
Anonymous Setting
There is a drop-down menu for both “Anonymous viewer”and “Anonymous PTZ control”to disable or enable
the function.
Viewer
Operator
Administrator
It only allows the user to access to the Live View page.
It allows to view the Live View page, create and modify events, and adjust certain other settings.
It allows the user to watch the live view and access all configurations.

10
Network
TCP/IP
Internet Protocol Version 4 (TCP/IPv4)
Obtain an IPaddress automatically (DHCP): If a DHCP server is installed on the network, to select this
while the IP address is assigned by the DHCP server.
Obtain DNS server address automatically: Select this to obtain the address of DNS server
automatically.
Use the following IP address: Select this option when the fixed IP address is set.
IP address: Enter the IP address of the device.
Subnet mask: Enter the subnet mask.
Default gateway: Enter the default gateway.
Use the following DNS server address: Select this when you set the fixed address as the IP address of
DNS server.
Primary DNS server: Enter the IP address of the primary DNS server.
Secondary DNS server: Enter the IP address of the secondary DNS server, if necessary.
HTTP
HTTPport number: Select 80 in general situations. If you want to use a port number other than 80,
select the text box and enter a port number between 1024 and 65535.
When you have set the HTTP port number to a number other than 80 on the Network Setting screen
in the Setup Program, access the device by typing the IP address of the device on the web browser as
follows: Example: when HTTP port number is set to 2000 http://192.168.1.100:2000/

11
Note: Reboot the IP Camera after the network setting has been made.
Note: If you connect the IP Camera with your computer directly, the default network domain of camera
is 192.168.1.xx
PPPoE
If your ISP provides Dynamic IP with authentication by username and password, type all PPPoE information in
this part. When using the PPPoE function, you need to turn on the DDNS or IP Notification function at the same
time.
IPaddress: The IP address obtained at the PPPoE connecting with network.
User ID: Enter the user ID for authentication necessary for PPPoE connections. Type it up to 64
characters.
Password: Enter the password for authentication necessary for PPPoE connections. Type it up to 32
characters.
Re-type password: Re-type the password to confirm.
Obtain DNS server address automatically: Select this to obtain the address of DNS server
automatically.

12
Use the following DNS server address: Select this when you set the fixed address as the IP address of
DNS server.
Primary DNS server: Enter the IP address of the primary DNS server.
Secondary DNS server: Enter the IP address of the secondary DNS server.
Note : 1. PPPoE (Point-to-Point Protocol over Ethernet): PPPoE is a network protocol for encapsulating
Point-to-Point Protocol frames insider Ethernet frames. PPPoE connection is used mainly with ADSL
service where individual users connect to the ADSL transceiver (modem) over Ethernet work. It also
widely used in XDSL(digital affiliate line such as ADSL, VDSLor SDSL)
2. Reboot the IP Camera after the network setting has been made.
3. The IP Camera with Intelligent IP Installer can’t be founded after turning on the PPPoE and reboot.
WLAN (F3206)
The wireless network has to be set up by using cable network connection. After setting the camera
correctly, the wireless function can work without cable network connection. Please follow the setting
process below step by step:
1. Make sure IP Camera connect with Wi-Fi USB.
2.Go to “Setting →System →Network →WLAN,”select option “Enable”. You will see the wireless
Setting screen.

13
3. Then click “Refresh”. All access points (AP) around you will show up.
4. Select the AP you wish to connect and click “Connect”.
5. Enter password at passphrase if you need. If you don't know the setting of the wireless AP, please ask
your network administrator.
WPS (F3206)
WPS (Wi-Fi Protected Setup) also known as a standard for easy and secure establishment of a wireless
home network. Enable it when wireless is turned on, and you will see the wireless IP and MAC of this IP
camera.

14
Configuration Method
PBC –Select to start WPS configuration.
PIN –Select and click Generate new PIN to generate a new PIN code and start WPS configuration.
This list is the result of network scan that only provide wireless AP with WPS function. It will be shown
where the network is currently linked.
Date Time
Current Date / Time
It displays current time and date of IP Camera and PC that you connected, and you may select the Date/Time
format as you wish in the drop-down menu.
Note: If you would like the Date / Time information shows on the Live View screen, please check “Basic Setup
→Video →Overlay →Overlay Type →Time Stamp ”and save the setting.
Synchronization Method
Keep current setting: Select this mode to keep the current date and time of this IP Camera.
Synchronize with Client PC: Select this mode to keep the date and time of this IP Camera is the
same as the monitoring PC.
Manual setting: Select this mode to adjust manually the date and time of this IP Camera.
Synchronize with NTP: Specify the NTP server name and click “Update now”to synchronize the
date and time of this IP Camera with those of the time server, known as the NTP server.
Time Zone
Time Zone:Select the Time Zone format of Greenwich Mean Time among different
cities. The time display will be the same as the current date / time option.
Daylight Saving Time: There are two modes to choose for setting up daylight saving time.
By Date: Set the start and end time by select month, day, hour, and minute.
By Week Number: Set the start and end time by select month, week, hour, and minute.

15
Note: The NTP server (Network Time Protocol) is the time server which is an Internet standard
protocol built on the top of TCP / IP. This assures accurate synchronization to the millisecond of
computer clock times in a network of computers.
Video
Video Setting
Image
Image Rotated: Select the screen display “flip”, “mirror”, or “flip + mirror.
Video clip format: Select RECORDING compression format H.264、MPEG-4、MJPEG、EZVuu HQ
and EZVuu LQ .
Profile1(H.264): H.264 provides higher compression rate than MPEG-4. Thus, H.264 can decrease the
bandwidth usage and further apply on 3G. However, H.264 will occupy more system resources than
MPEG-4. As long as the operating system appears operating difficulties under H.264 format, please change
to select MPEG-4.
Profile2(MPEG-4): MPEG-4 has the advantage of sending a lower volume of date per time unit
across the network (bit-rate) compared to Motion JPEG and therefore provides a relatively high
image quality at a lower bit-rate (bandwidth usage).
Profile3(MJPEG): Motion JPEG stream uses considerable amounts of bandwidth, but provides excellent
image quality and access to every image contained in the stream.
Overlay

16
Text information can be showed on the display screen, such as Date / Time and the user-defined title.
Privacy Mask
Privacy Mask is an area of solid color that bans users from viewing part of monitored area.
Click “Add”and a setting pop-up window comes out. A translucent rectangle is located at up left of the image,
drag it to where you wish to cover and resize it. Enter a descriptive name, select the color and enable it then
save.
Profile
There are five stream profiles available for quick set-up. These settings can be adjusted and new customized
profiles can be created. Each profile has a descriptive name, describing its usage and/or purpose. The profiles
can be selected from the Live View page.
Create a new stream profile: Click “Add”and a setting pop-up window comes out,
Edit the stream profile: Click the profile you appoint to modify and click “Edit”to do the further setting.

17
Day / Night
IR cut filter mode: There are 4 modes for IR cut filter to switch Auto, Night Mode, Day Mode, Schedule
to make IR cut filter work based on different conditions.
IR cut filter switch delay: This is interval time (by seconds) when the IR cut filter switch has been
implemented till it indeed works.
IR cut filter threshold: Dark-This is the threshold for the IR cut filter image environment being bright
turning to dark.Bright- This is the threshold for the IR cut filter image environment being dark turning to
bright.
IR Mode: Select one among four modes --- auto / active / inactive / schedule. It decides IR working
condition.
IR Level: The strength of IR light can be adjusted upon application environment.

18
Audio
Audio Channel
Full duplex: Select it for simultaneous communication in both direction between the connected
administrator and IP CAM. It means both parties can speak and be heard at the same time.
Half duplex: Select it for communication in both directions, but only one direction at a time. It cannot
receive signal until the transmission has been done. Therefore, once one party speaks but can’t hear the
voice, and vice versa.
Talk only: It narrows down to one way just for talking.
Listen only: It narrows down to one way just for listening.
Audio Input
Select the microphone input gain value you wish in the drop-down menu, and based on your region to select the
proper codec and save all settings.
G.711 U-law : one codec for “Computer Audio”, used in North America & Japan areas.
G.711 A-law : another codec for “Computer Audio”, used in Europe and the rest of the
world.
AMR Audio: an audio codec of the third generation communication for mobile.
PHONE. While the option selected, your mobile phone will receive the audio file from
IP Camera. And you can choose the bit rate from 4.75k to 12.2k. However, the usage of
this codec will cause frame-rate decreasing.
Off: audio file won’t be transmitted by IP CAM.
Audio Output
Select the speaker output gain value you wish in the drop-down menu and save it.

19
Live View
Video
Please refer to p.15~17
Audio
Please refer to p.17~18
Camera Setting
View Setting
A view area is a cropped part of the overview image. Each view area is treated as a video source in Live
View with its own Video Stream, PTZ and Event settings. There are 4 areas can be preset and 6 various
resolutions for each view area.
Note: Except the ViewArea1 has been fixed to be full resolution, the rest of the three are available to be
set to resolution you wish in the drop-down menu.