Zebex Z-2065 series User manual

Handheld Computer
Z-2065 series ( Version 3.00 )
User’s Manual
ZEBEX INDUSTRIES INC.
WWW.ZEBEX.COM
jkl
4
7stu
1abc
ESC
ENT
SP
F2
F4
F3
9
vwx
8yz
65mno pqr
BS
F1
3
2def ghi
ENT
SCAN
RESET
0@

ZEBEX INDUSTRIES INC.
Subject Version Date Page
Z-2065 series User’s Manual 3.00 2010/3/19 2 / 69
Editorial Record
Version Date of edited Page Content
Ver 2.00 2009/3/2 9
Revise the picture of Package contents
Ver 2.00 2009/3/2 10
Revise the picture of Cradle Package
Ver 2.00 2009/3/2 11,12
Revise the picture Purchaseable accessories
Ver 2.00 2009/3/2 26~52
Adding the instruction of Using PowerPack
Ver 2.00 2009/3/2 53~56
Adding the picture of How to order
Ver 3.00 2010/1/25 26~49 Updated PowerPack Functions and pictures
Ver 3.00 2010/3/16 30~39 Adding GPRS User Manual
Ver 3.00 2010/3/19 1~26 Adding New Photo for Z-2065

ZEBEX INDUSTRIES INC.
Subject Version Date Page
Z-2065 series User’s Manual 3.00 2010/3/19 3 / 69
Table of Contents
Preface
About This Manual.................................................................................................5
Symbols used in this manual......................................................................5
Copyright................................................................................................................6
Safety Information.................................................................................................6
Laser Safety ..................................................................................................6
Safety Operation...........................................................................................7
Federal Communication Commission (FCC) Statement ...........................8
Unpacking
Package Contents..................................................................................................9
Optional Parts ......................................................................................................10
Cradle package ............................................................................................10
Purchaseable Accessories ........................................................................11
General Guide......................................................................................................13
Getting Start
Inserting the Battery............................................................................................15
Remove the Battery.............................................................................................15
Charging the Battery...........................................................................................16
Charging by cable .......................................................................................16
Charging by cradle ......................................................................................16
Charging the battery separately in the cradle ..........................................17
System Reset.......................................................................................................19
Using the Warm reset function..................................................................19
Using the Cold reset function....................................................................19
PC System Requirements ...................................................................................20
Connecting To a PC.............................................................................................20
Connecting via the RS232..........................................................................20
Connecting via USB Cradle.......................................................................21
Connecting the Z-2065 directly via USB.................... 錯誤 ! 尚未定義書籤。
Inserting SD Card ................................................................................................22
Remove the SD Card...........................................................................................22
About The Product ..............................................................................................23
Prerequisites...............................................................................................23
Specifications .............................................................................................24
Using Barcode Scanner
Scanning Barcodes.............................................................................................25
Using RFID Scanner
Scanning RFID .....................................................................................................26
UZEBEX Hand-Held Terminal GPRS User’s Guide
Making New Connection.....................................................................................30
Set Connection Properties..................................................................................32
Phone Number.....................................................................................................34
Set Dial Properties...............................................................................................35

ZEBEX INDUSTRIES INC.
Subject Version Date Page
Z-2065 series User’s Manual 3.00 2010/3/19 4 / 69
Connect to GPRS Service...................................................................................37
Disconnect GPRS Service ..................................................................................39
Using Zebex Power Pack
Backlight...............................................................................................................40
Calculator.............................................................................................................42
File Transfer .........................................................................................................43
File Transfer Operation................................................................................44
Preload Manager ……………………………………………………………………...46
Preload Operation.......................................................................................47
Switch...................................................................................................................50
Scan Manager ….……………………………………………………………………. .52
Backup/Restore ...................................................................................................56
Firmware Information..........................................................................................58
Function Key Manager........................................................................................59
How to order………………………………………………………………………………..64

ZEBEX INDUSTRIES INC.
Subject Version Date Page
Z-2065 series User’s Manual 3.00 2010/3/19 5 / 69
Preface
About This Manual
Thank you for your purchase of the ZEBEX Z-2065 series handheld
computer. ZEBEX Z-2065 series product is at the forefront of
handheld computer technology, and this manual will provide the
necessary information on the many and varied options available to
you.
The Z-2065 series product is a compact, ergonomic and durable
handheld computer. It is designed with an integrated 802.11b/g
wireless communication, 1D/2D barcode scanner, touch screen and
29-keys keypad. The design is complies with IP64 regulations and
ideal for the mobile worker as it simple and easy to use anywhere
along a supply chain.
Symbols used in this manual
A triangular shape indicates you should exercise
caution.
A circle shape indicates something you should not to
do.
A black circle indicates something you must to do.
A note symbol indicates you the information that is
important and you should be observed.

ZEBEX INDUSTRIES INC.
Subject Version Date Page
Z-2065 series User’s Manual 3.00 2010/3/19 6 / 69
Copyright
ZEBEX Industries Inc. makes no warranty of any kind with regard to
this material. Including but not limited to the imply warranties of
merchantability and fitness for a particular purpose. ZEBEX Industries
Inc. shall not be liable for errors contained herein or for incidental
consequential damages in connection with the furnishing,
Performance or use of this product.
ZEBEX Industries Inc. will be under no liability in respect of any defect
arising from fair wear and tear, willful damage, negligence, abnormal
working conditions, failure to follow the instructions and warnings, or
misuse or alteration or repair of the products without written approval.
No part of this document may be reproduced, transmitted, stored in a
retrieval system, transcribed or translated into any language or
computer language in any form or by any means electronic,
mechanical, magnetic, optical, chemical, manual or otherwise, with
express writ- ten consent and authorization.
We reserve the right to make changes in product design without
reservation and without notification. The material in this guide is for
information only and is subject to change without notice.
ZEBEX is a registered trademark of ZEBEX INDUSTRIES INC.
© Copyright 2008 ZEBEX.
Safety Information
Your safety is of the utmost importance so please observe and follow
the following guidelines that allow you to use the scanner in a safe
and responsible way.
Laser Safety
The Z-2065 series handheld computer complies with safety standard
IEC825-1(1993) for a Class 2 laser product. It also complies with
U.S.21CFR1040 as applicable to a Class II laser product. Avoid
staring at direct laser light as the laser beam may hurt your eyes.
LASER BEAM
Never look directly into the laser beam. Doing so can cause
serious eye damage.

ZEBEX INDUSTRIES INC.
Subject Version Date Page
Z-2065 series User’s Manual 3.00 2010/3/19 7 / 69
Safety Operation
WARNING
Disassembly and Modification
Never try to disassemble or modify the device in any way. All
servicing should be carried out by qualified Zebex personnel or
Zebex- approved engineers.
Interior Parts and Components
Never touch interior high voltage parts or components. Doing
so creates the danger of electrical shock.
Drop and Knock the Device
Be careful when using the device; do not drop or knock the
device as irreversible damage to the unit may occur.
Extreme temperature
Do not operate the device under extreme temperature.
Battery and Charger
The use of third-party battery or charger may either damage the
device or shorten the life of the device.
CAUTION
Dropping and Damage
Should the drop the device and damage it, immediately turn off
the power and contact your original dealer or an authorized
ZEBEX service provider. Continued use creates the danger of
fire and electrical shock.
Abnormal Conditions
Should the device become hot or start to emit smoke or an
original dealer or an authorized ZEBEX service provider.
Continued use creates the danger of fire and electrical shock.
Foreign Objects
Should any foreign matter ever get into the device, immediately
turn off the power and contact your original dealer or an
authorized ZEBEX service provider. Continued use creates the
danger of fire and electrical shock.
Moisture
Keep the device away from vases, planters, cups, glasses and
other containers of liquid. Also keep it away from metal. Water
and metal getting into the device creates the danger of fire and
electrical shock.

ZEBEX INDUSTRIES INC.
Subject Version Date Page
Z-2065 series User’s Manual 3.00 2010/3/19 8 / 69
Federal Communication Commission (FCC)
Statement
You are cautioned that changes or modifications not expressly
approved by the part responsible for compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in the accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. End users must follow the specific
operating instructions for satisfying RF exposure compliance. This
transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.

ZEBEX INDUSTRIES INC.
Subject Version Date Page
Z-2065 series User’s Manual 3.00 2010/3/19 9 / 69
Unpacking
Package Contents
AC Adapter
Z-2065 series
Mobile Data Terminal
Stylus Pen RS-232 DB9 (F) Cable
Hand Strip USB cable
(Terminal connect to PC USB port)
Hand strip Holder
BatteryPack
Sling for stylus Pen

ZEBEX INDUSTRIES INC.
Subject Version Date Page
Z-2065 series User’s Manual 3.00 2010/3/19 10 / 69
Optional Parts
Cradle package
Docking Cradle RS232 cable
AC Adapter USB cable
(Cradle to USB)

ZEBEX INDUSTRIES INC.
Subject Version Date Page
Z-2065 series User’s Manual 3.00 2010/3/19 11 / 69
Purchaseable Accessories
RS232 Cable AC Adapter
RS-232 DB9 (F) Cable Britain Plug head
USB cable (Cradle to USB) U.S. Plug head
Battery Pack
Australia Plug head
Stylus Pen Europe Plug head

ZEBEX INDUSTRIES INC.
Subject Version Date Page
Z-2065 series User’s Manual 3.00 2010/3/19 12 / 69
Hand Strip for stylus Pen Sling for stylus Pen
Hand strip Holder

ZEBEX INDUSTRIES INC.
Subject Version Date Page
Z-2065 series User’s Manual 3.00 2010/3/19 13 / 69
jkl4
7stu
1abc
ESC
ENT
SP
F2
F4
F3
9
vwx8yz
65mno pqr
BS
F1
32def ghi
ENT
SCAN
RESET
0@
General Guide
1 LED indicator
Indicates the status of read bar code or battery charge :
Green for successful read barcode or full charge of battery.
Red for battery just on charging.
2 Buzzer Outputs operation confirmation tones.
3 LED indicator for WI-FI Flashes in red when operating via WLAN communication
4 LCD screen Display various data when a program is being run.
5 Stroke keys A total of 29 keys are provided to turn power ON or OFF
and other operations.
6 Reset switch (inside the hole) Use reset needle (take off the other side of stylus pen
cover) to press the RESET switch located inside the hole.
7 Scan button For Barcode reading.
8 Mini USB port This port is for USB communication with PC.
9 Ear Jack Listens to the voice.
10 Mini SD I/O card slot Install the Mini SD I/O card
11 Scan windows Emits a laser for bar code reading.
12 RS-232 port This port is for RS-232 communication with PC
13 Stylus pen For touch screen operation and press RESET switch.
14 Hand strip Protects the Handheld Terminal to drop.
15 Battery Main battery
16 Sling Sling for stylus pen

ZEBEX INDUSTRIES INC.
Subject Version Date Page
Z-2065 series User’s Manual 3.00 2010/3/19 14 / 69
4jkl F2
F3
F4
SP
stu
7yz
98vwx
5mno 6pqr
ENT
BS
F1
1abc
ESC
2def 3ghi
ENT
RESET SCAN
0@
Arrow Arrow keys Press these to move around the screen.
ENT Enter key Press to confirm entries or commands.
0-9 Alphanumeric keypad Press to enter numerical or alphabetical data.
F1-F4 Function keys Press to access function keys 1-4.
BS Backspace key Press
to move cursor and deletes the previous character
each time.
Power/Backlight on key
1. Press to turn the power on.
2. Press more then 3 seconds for turn the terminal power
off and go into the suspend mode.
3. Press to turn the LCD backlight on when it is off.
ESC Escape key Press to perform a cancel action.
SCAN Scan key Press and hold to scan a barcode.
SF/Fn Shift key
The key is used in combination with other keys to type
special characters or perform other function keys.
1. Press after SF/Fn key and press Up key to turn
the
input method into upper alphabetical.
2. Press after SF/Fn key and press Down key to turn the
input method into lower alphabetical.
3. Press after SF/Fn key and press Left or Right key to
turn
the input method into numerical.
4. Press after SF/Fn key and press F1-F4 key to perform
F5 - F8 key.
TAB Tab key Press to add a tab indention.
SP Space key Press to add a space character.

ZEBEX INDUSTRIES INC.
Subject Version Date Page
Z-2065 series User’s Manual 3.00 2010/3/19 15 / 69
Getting Started
Inserting the Battery
Insert the battery pack as shown and watch the battery direction..
Remove the Battery
Push the side lock to pick up the battery pack.

ZEBEX INDUSTRIES INC.
Subject Version Date Page
Z-2065 series User’s Manual 3.00 2010/3/19 16 / 69
Charging the Battery
The Li-ion rechargeable battery can be charged while inserted in the
device itself or independently via the recharging slot at the back of the
cradle.
Charging by cable
Connect the charging cable and AC adaptor as shown.
Charging by cradle
USB Interface AC Power
Adapter
Jack In
RS232/COM port Interface
Cradle - rear view

ZEBEX INDUSTRIES INC.
Subject Version Date Page
Z-2065 series User’s Manual 3.00 2010/3/19 17 / 69
Left LED Right LED
Cradle - front view
Cradle LEDs
Left LED - The LED lit when a battery is inserted into the rear battery
slot of the cradle for recharge. It remains lit until the
charge is complete.
Right LED - The LED lit when the cradle is connected to AC power.
Charging the battery separately in the cradle
Insert the battery into the compartment at the rear of the cradle.

ZEBEX INDUSTRIES INC.
Subject Version Date Page
Z-2065 series User’s Manual 3.00 2010/3/19 18 / 69
Connect the power jack to the cradle and plug AC adapter into the
socket.
NOTES
When charging the battery for the first time, charge for at least
12 hours prior to use.

ZEBEX INDUSTRIES INC.
Subject Version Date Page
Z-2065 series User’s Manual 3.00 2010/3/19 19 / 69
6pqr5mno
0
8vwx
stu
7
SP
yz
9F4
F3
ENTENT
12def
jkl
4
abc
ESC
F1
3ghi F2
BS
SCAN
RESET
0@
System Reset
Using the Warm reset function
Warm reset function allows you to return the device to the default
settings, wile not wiping all data from the memory.
Insert the needle into the reset hole as shown and press down gently
, to
reset the device.
Using the Cold reset function
Cool reset function allows you to return the device to the factory settings,
wile wiping all data from the memory.
Press down and hold the power key and Insert the needle into the reset
hole to cold reset the device.
WARNING
Cold reset will erase ALL pre-configured data on the scanner.
Check
carefully to make sure you have uploaded all important
files to
your PC before proceeding with the reset.

ZEBEX INDUSTRIES INC.
Subject Version Date Page
Z-2065 series User’s Manual 3.00 2010/3/19 20 / 69
PC System Requirements
Windows XP Operating System
64 MB RAM
50 MB free HDD space
Interface : USB / RS-232 ports
WLAN transmitter (optional)
Bluetooth transmitter/receiver (optional)
Connecting To a PC
In order to use the software supplied with the Z-2065, the mobile data
terminal must be connected to a PC.
Connecting via the RS232
In order for the sync software to work properly, the cradle must be
connected to your computer’s COM port. Attach one end of the RS232
cable to the RS232/COM interface connector on the cradle and the other
to the COM1 port on your PC.
1. Or can use attach one RS-232 cable to connect with your computer’s
COM port directly.