Zebronics BT6593RUCF User manual

BT6593RUCF
ZEB
5 . 1 S p e a k e r
BT6593RUCF
ZEB
www.zebronics.com
User Manual

Thank you for purchasing the ZEB-
BT6593RUCF 5.1 Speaker. Please read this
user manual carefully and keep for future
reference.
Warning
Ÿ To prevent fire or electric shock do not
expose the unit to rain or moisture.
Note: This product is for indoor use only.
Ÿ Refer servicing to qualified personnel only.
The lightning flash with arrowhead
symbol, within and equilateral
triangle, is intended to alert the
user of the presence of uninsulated
"dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an
equilateral triangle is intended to
alert the user of the presence of
important operating and
maintenance (servicing)
instructions in the manual accompanying the product.
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions before using the
product.
2) Read all the warnings carefully.
3) Follow all instructions carefully.
4) Do not use this unit near water.
5) Clean only with dry cloth.
6) Do not block any ventilation openings. Install
in accordance with the manufacturer's
instructions.
7) Do not install the speaker system near any
heat sources such as radiators, heat registers,
stoves, or other unit (including amplifiers) that
produce heat.
8) Protect the power cord from being waled on
or pinched particularly at plug points and the
point where they exit from the unit.
9) Only use attachments/accessories specified
by the manufacturer.
10) Use only with the cart, stand, tripod,
bracket, or table specified by the manufacturer
or sold with the unit. When a cart is used, be
c a u t i o u s w h i l e m ov i n g th e ca r t / u n i t
combination to avoid injury from tip-over.

11) Unplug this unit during
lightning storms or when
unused for long period of
time. Refer all servicing to
qualified service personal.
Servicing is required when the unit has been
damaged in any way, such as power-supply
cord or plug is damaged, liquid has been
spilled or objects have fallen into the unit, the
unit has been exposed in rain or moisture,
does not operate normally, or has been
dropped.
Package Contents:
Subwoofer : 1 U
Satellite : 5 U
Remote control : 1 U
Input cable (RCA - RCA ) : 1 U
Antenna cable : 1 U
Wall mount fasteners : 1 U
Stereo to RCA adapter : 1 U
How to use the BT:
1.select the audio input to BT mode
2. s e a rc h BT dev i c e wit h na m e “Z EB-
BT6593RUCF”
3.connect the BT
4.if your BT device below 5.0 version, input
password “0000” when connecting.

Product Representation
Front Panel
U
INPUT : Input Mode BT v5.0/USB/FM/AUX/AC-3
5.1/2.1 : 5.1/2.1 function key.
STANDBY / / AUTO : Stand by function by pressing
it 3 secs in BTv5.0/USB/FM/AUX/AC-3 Mode;
Play/Pause in BT/USB mode; Automatic FM radio
search by pressing 3 secs.
VOL- / / CH- : Turn down the volume; Previous
track in USB/BT Mode; Previous saved channel in FM
mode.
VOL+ / / CH+ : Turn up the volume; Next track in
USB/BT mode; Next saved channel in FM mode.
U DISK : USB port.
Mic1 & Mic2 : Mic 1/2 Port
ST
.BY
INP UT
CH-/
VOL-
CH+/
VOL+
AUTO/
5.1/2.1
U-D ISK
MIC
AUX

Important Notes
• Make sure that the power supply is proper
and never handle the power cord or its plug
with wet hands when plugging into, or
unplugging from an plug-point.
• Ensure that the main power switch is in the
"OFF" position before connection the AC power
cord to the power supply to avoid damage to
the unit.
• A damaged power cord can easily cause an
electric shock or fire; Never use a power cord
after it has been damaged.
Battery Installation
R6 SI ZE AA A 1.5VR 6
1
1
R6 S IZ E AAA 1.5VR 6
2
R6 SI ZE AAA 1. 5V
2

Remote Control
Power switch
button (Standby) switch On
or off
USB USB input
FM FM Radio
AUX AUX Input
BT BT Input
DVD AC-3 input for 5.1
mode audio source.
EQ Equalizer preset
4
; Play & pause
9 Previous track
when USB/BT Input
CH- Previous Channel
When FM Input
: Next track when
USB/BT Input
CH+ Next Channel
When FM Input
VOL -/+ Master Volume
DISP -/+ Lightness Adjust
REPEAT Repeat Mode
TUNE -/+ Previous/Next
Channel Keep Pressing to
search the channel
AUTO Press and Hold
for 2-3 sec to begin FM auto
scan
SAVE Save FM Channel
RESET When the Volume
is at The Maximum, Press
"RESET" Button at The
Status While Power On
MUTE Mute
Press any key
to choose
the track
BT
5.1/2.1
MUTE

5.1/2.1 5.1/2.1 mode.
SW -/+ To calibrate the woofer sound level.
FL -/+ To calibrate the front left speaker level.
FR -/+ To calibrate the front right speaker level.
CEN -/+ To calibrate the center level.
SL -/+ To calibrate the surround left levels.
SR -/+ To calibrate the surround right sound levels.
SLEEP -/+ Time choice 0/10/20/30/45/60/90/120.
Input connectivity
Note: Insert the plugs fully into the jacks. Loose
connections may produce noise interference.
AUDIO INPUT
COMPUTER
TV
DVD
DV D
FM RADIO ANTENNA
CE N
FR
SR
FL
SL
AU DI O OUT PU T
FR
R
SR
SW
FL
L
SL
CE N
FM
AN T
DV D AUDI O IN PUT
AU X AUDI O IN PUT
~ AC IN
ON
OF F
PO WE R SWI TC H

Output connectivity
SPEAKER TERMINALS
Connect front speakers, center speaker,
surround speakers to 5.1 speaker output
terminals.
Ÿ The front speaker's cords to the FRONT
SPEAKERS terminals
Ÿ The center speaker's cords to the CENTER
SPEAKERS terminals
Ÿ The surround speaker's cords to the
SURROUND SPEAKER terminals
Note: Do not leave objects generating magnetism near
the speakers.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ON
OFF

Unit Operation
Ÿ First plug the cable of all the satellite into
the output jack on the rear panel of the
woofer, one end of the audio cord into the
input jack on the rear panel, the other end
into the output jack of the computer or any
external audio source, the power cord into
the power plug socket. Then switch on the
unit, the LED will be in the blinking state in
the front panel, when the standby button is
being pressed the unit lights up.
ŸPressing the VOL + and VOL - keys will
enable the volume levels to be increased &
decreased.
ŸWhen the 5.1/2.1 button is pressed, it
plays back the track from stereo to 5.1
channel in all modes which is indicated
through the blue led for the selected mode.
ŸWhen in FM mode, press and hold
PLAY/PAUSE button in the front panel of the
woofer or the AUTO button in the remote for
2-3 seconds the automatic scanning will be
proceeded and once after scanning it will
playback the first channel of the full scan
done.
ŸWhen inserted a USB, it will play from the
device last inserted, the input mode will be
changed to USB on the display and starts
playing from the beginning or auto resumed
from the track of the last time playback.

Ÿ When USB drive is working, press the
PLAY/PAUSE button to pause the music,
press the PLAY/PAUSE button again to
resume music.
Ÿ When USB drive is playing, press the
MODE button to cycle through the LINE IN,
USB, FM, BT mode.
Ÿ When USB drive is working, press the
PREVIOUS and NEXT button to choose the
previous or the next audio track.
Ÿ After stop using the unit, Use the stand by
button to turn off the unit, switch off the
power switch, unplug the power cord.
Specification:
Output power (RMS)
Subwoofer : 35 Watts
Satellites : 12 Watts x 5
Total : 95 watts
Driver size
Subwoofer : 13.33cm
Satellites : 7.62cm x 5
Impedance
Subwoofer : 4Ω
Satellite : 4Ω
Frequency response : 40Hz - 20kHz
S/N Ratio : ≥75dB
Separation : ≥50dB
File format support : MP3/WMA/WAV/FLAC
(USB) /APE
Line input : 2ch RCA , AC-3

Max. supported
USB memory size : 128GB
FM frequency
scan range : 87.5MHz-108MHz
BT name : ZEB-BT6593RUCF
BT version : 5.0 + EDR
Product dimension (W x D x H)
Subwoofer : 165 X 295 X 310 mm
Satellite : 95 x 98 x 150 mm
Net. weight
Subwoofer : 4.71kg
Satellite : 0.386kg x 5
Total : 6.6kg
Features
5.1 Channel Speaker
BT v5.0/USB/FM/AUX/AC-3
LED display
13.33cm subwoofer
Remote control
Wall Mountable
Dual Microphone input Jack
Volume/Bass/treble Control
ISO 9001:2015 Certified Company
www.zebronics.com