Zebronics ZEB BT2150RUF User manual

ZEB
www.zebronics.com
User Manual
ZEB
2.1 Speaker

2.1 Channel speaker
Wall mountable
Specification
LED Lights
Remote control
Total : 40 Watts
LED Display
Driver size
Wireless BT/USB/AUX/FM
Subwoofer : 10.16cm
Satellites : 7.62cm x 2
Subwoofer : 20 Watts
Satellites : 10 x 2 Watts
Features
Volume & Bass adjustment
Output power (RMS)
Thank you for purchasing Zebronics
Speaker. Please read this user manual
carefully before Operation & save it for future
reference.
Note:
• Avoid the use of this speaker at the
high-temperature and high humidity
environment.
• Avoid self-disassemble of speaker, or it
will result in the failure of warranty.

memory size : 32GB
FM frequency range : 87.5 MHz - 108 MHz
BT name : ZEBRONICS
BT Range : 10 Meters
BT version : 5.1
Product dimension (W x D x H)
Separation : ≥45dB
File format support
Max supported USB
Line input : 2ch RCA
S/N Ratio : ≥80dB
(USB) : MP3
Frequency response : 40Hz - 20kHz
Subwoofer : 150 x 287 x 205 mm
Net. weight
Subwoofer : 2.54kg
Satellites : 312g x 2
Satellite : 93 x 98 x 138 mm
Total : 3.16kg
Impedance
Subwoofer : 4Ω
Satellite : 4Ω

Control description:
3
5
4 6
7
1
2
5. Scan / Play / Pause
6. Prev.
7. Next
2. Volume Control
3. USB Port
1. BASS Control
4. Mode

Remote control
27
12
1
11
4
8
9
10
5
3
6
1. MODE: to Change between different input
sources
3. NEXT: to select the next song in USB/BT
4. PREV.: to select the previous song in
USB/BT
2. POWER: Switch ON/OFF the speaker
5. VOL+: Increase the speaker volume
7. MUTE: Mute the audio playback
8. Play / Pause: play / pause the audio
playback and also to change the next
6. VOL-: decrease the speaker volume
channel in FM mode

FM channel using numbers from 0-9
12. 0-9 : To directly select the song number /
General instruction:
function
Switch the Speaker to BT mode, Scan for
nearby BT devices in your mobile. Tap on
“ZEBRONICS” to connect.
11. REP: To enable the REPEAT ONE/ALL
Insert the USB pen drive to the speaker. The
speaker will detect the USB&audio from it will
be played automatically.
Bluetooth connectivity
USB mode
9. EQ: To change different Equalizer modes
10. SCAN: For Auto-Scanning the channels in
FM mode
during USB playback.
Switch the speaker to FM mode. In FM Mode,
Long press the Play/Pause key to scan the
available FM channels. Once the scanning is
done, the speaker will start playing the first
scanned channel. The next and Prev. buttons
can be used to change the FM channels.
FM Radio

ISO 9001:2015 Certified Company
www.zebronics.com
AUX-IN
The speaker can be connected to an audio
device using audio cable. Connect the one end
of the cable to the speaker &connect the other
end of the cable to an audio source. The songs
from the audio source can be heard through
the speaker.