Zebronics ZEB-LEGEND User manual

www.zebronics.com
User Manual
ZEB
Tower Speaker
LEGEND
VOL
MUTE
SCAN MODE
123
6
5
4
789
0
EQ RPT

Dear Customer,
Thank you for purchasing our ZEB-LEGEND
Mono Tower Speaker. Please read the user
manual carefully and save this manual for
future reference.
Note:
Ÿ Avoid the usage of the product at high
temperature and high humidity environment.
Ÿ Avoid the self- disassembly of the product
as it results in voiding your warranty.
Ÿ Turn off the speaker when the speaker is
not in use.
Ÿ To know more about Terms and conditions
f o r w a r r a n t y p o l i c y , p l e a s e v i s i t
https://zebronics.com/pages/warranty-policy
Features
Wireless BT/USB/ FM /AUX/MIC Input
LED display
13.33cm Subwoofer
Remote control
Karaoke
6.3mm Microphone Input
Bass & Volume Control Knob
Specification
Output Power (RMS) : 80W
Driver Size
Subwoofer : 13.33cm
Mid range : 10.16 cm x 2

Impedance
Subwoofer : 8Ω
Mid range : 4Ω
Frequency response : 20Hz – 20 kHz
S/N Ratio : ≥70dB
Separation : ≥75dB
File format support : Mp3
Line input : 2ch RCA
Max. supported
USB memory size : 32GB (Max)
FM frequency
scan range : 87.5MHz - 108MHz
BT Name : ZEB-LEGEND
BT version : v5.0
Product Dimension :16.2 x 25 x 66.7 cm
(W x D x H)
Net. Weight : 6.1kg
Package Content
Speaker : 1 U
Remote : 1 U
Input Cable : 1 U
Wired Microphone : 1 U
QR Code Guide : 1 U

Product Description:
Front Panel
1. Volume Control Knob 6. Input Mode
2. Play/Pause 7. Prev-
3. Next + 8. USB Port
4. Bass Control Knob
5. Microphone Input
Back Panel
A : AUDIO INPUT (AUX) - STEREO INPUT
• These jacks are used to receive the STEREO signal
from a CD/DVD (2CH) Player
• You can also use the included RCA to 3.5mm cable
to and connect the other end of the cable to the input
audio source
1
2
3
4
5
6
78
www.zebronics.com
Input Power : AC 220-240V 50/60Hz
Output Power (RMS) : 80W
R-81008958
IS 616 : 2017/
IEC 60065 : 2014
www.bis.gov.in
ZEB
Tower Speaker
LEGEND
AUDIO INPUT (AUX)
STEREO INPUT

Remote Control
Power : standby ON/OFF
Numeric Pad( 0-9) : To select particular track from USB
drive directly or to enter FM Channel frequency directly
Vol+ : To increase the volume
Prev : To select the previous tracks in BT/USB or to Tune
in FM mode
Vol- : To decrease the volume
RPT : To Switch between available repeat modes
Scan : To scan all FM channels available
Mode : Mode Selection (BT/AUX/USB/FM)
EQ : Short press to control BASS and short Press again to
control TREBLE. Long Press to use Equalizer
Play/Pause To Play / Pause the current track . To switch
next channel in FM mode
Next : To select the next tracks in BT/USB or to Tune in
FM mode
Mute To Mute / Unmute
MUTE
VOL
SCAN MODE
123
456
7 8 9
EQ 0RPT
POWER
BUTTON
EQUALIZER REPEAT
NUMERIC
BUTTONS
VOLUME -
VOLUME +
PREVIOUS
NEXT
PLAY/PAUSE
SCAN INPUT MODE
MUTE / UNMUTE

Instructions for Use:
Button functions
1. Short press the Mode button on the
integrated control panel or the remote control
to change the speaker's input mode (BT, AUX,
USB & FM).
2. Short press on the Next button to switch to
the next song in BT / USB mode or FM mode
respectively.
• Long Press to Increase the volume.
3. Short press on the Prev button to switch to
the previous song in BT / USB mode or FM
mode respectively.
• Long Press to Decrease the volume.
4. Short press on the Play/Pause button to
pause or play the song played in the BT / USB
mode or Scan In Fm mode.
5. Adjust the integrated VOLUME knob on the
front panel of the speaker to increase or
decrease the volume of the speaker.
6. Adjust the integrated BASS knob on the
front panel of the speaker to increase or
decrease the Bass of the speaker.
• Toggle the rocker switch on the rear panel of
the speaker to Turn on / Turn off the speaker.

General Instructions
BT Mode:
Turn on the speaker and short press “mode
button” to switch to BT mode. Now turn your BT
on your phone, tablet or computer and click on
scan for nearby BT devices. Once the search is
completed search for the BT name “ZEB-
LEGEND” and tap on it to pair with your device.
USB Mode:
The speaker automatically switches to USB
Input Mode when the USB flash drive is
plugged into the USB slot of the speaker.
Note: This mode is not available until USB flash drive is
inserted. Also, please make sure that your flash drive
has MP3 audio files other audio file formats are not
supported.
FM Radio:
Switch to FM mode by pressing the mode
button in remote, then short press the Play /
Pause button to Scan for the available FM
channels. Once the scanning process is done,
the speaker plays the first scanned FM
channel. Now press on the next / prev button
on the front panel to switch to the previous or
next scanned FM channel. Alternatively you
can use the remote control to switch the FM
channel by pressing the Numeric pad of the
remote control.

AUX Mode:
The speaker can be connected to an audio
device by using the included RCA to 3.5mm
cable. Connect the RCA cable according to the
color of the connector, and connect the other
end of the cable to the input audio source. Now
you can play the audio content of the input
device, which is directly delivered to the
speakers.
INSTRUCTIONS FOR USING THE REMOTE
CONTROL'S INTEGRATED MICROPHONE
FUNCTION BUTTONS :-
1) Long press EQ button once to Select ECHO
To adjust Echo volume Press Vol + / Vol-
2) Long press EQ button again to Select mic
volume
To adjust Mic volume Press Vol + / Vol-
3) Long press EQ button again to Select mic
Priority
To adjust Mic Priority Press Vol + / Vol-
Press and hold the EQ button thrice to toggle the
microphone priority feature.
To adjust the microphone priority feature press “Vol +” to
increase the priority of the microphone output or “Vol –“to
decrease the priority of the microphone output.
ISO 9001:2015 Certified Company
www.zebronics.com