Zebronics ZEB RAINBOW User manual

RAINBOW
ZEB
www.zebronics.com
User Manual
2 . 1 S p e a k e r
RAINBOW
ZEB

Thank you for purchasing the ZEB-
RAINBOW - 2.1 Speaker. Please read the user
manual carefully before usage & save it for
future reference.
Note:
Ÿ Avoid the usage of this speaker at the high
temperature and high humidity environment.
Ÿ Avoid the self-disassembly of the product as
it results in the failure of Warranty.
Features
Ÿ 2.1 channel speaker
Ÿ Wireless BT/USB/AUX/FM
Ÿ LED display
Ÿ Volume & Bass adjustment
Ÿ RGB Lights
Ÿ Remote control
Ÿ Wall mountable
Specifications
Output power (RMS)
Subwoofer : 20W
Satellite : 15 W x 2
Total : 50 W
Driver size
Subwoofer : 10.16 cm
Satellite : 7.62 cm x 2
Impedance
Subwoofer : 4Ω
Satellite : 6Ω

Frequency response : 40Hz - 20kHz
S/N Ratio : ≥ 80dB
Separation : ≥ 45dB
File format
support (USB) : Mp3
Line input : 2ch RCA
Max. supported USB
memory size : 32GB
FM frequency range : 87.5 MHz-108 MHz
BT name : ZEB-RAINBOW
BT version : 5.0
Product dimension (W x D x H)
Subwoofer : 15 x 28 x 20.8 cm
Satellite : 10.3 x 8.5 x 14.5 cm
Package Dimension (W x D x H)
: 31.2 x 18 x 35.6 cm
Net. weight
Subwoofer : 2.6 kg
Satellites : 280 x 2 kg
Total : 3.16 kg
Package Content
Subwoofer : 1 U
Satellite : 2 U
Remote : 1 U
Input Cable : 1 U
QR Code Guide : 1 U

Control Panel Description
Back Panel Description
USB Port
Volume control
LED Display
Bass Control
Prev Track / Channel
Play / Pause
Next Track / Channel
MODE
Power
ON/OFF
Switch
www.zebronics.com
Input Voltage : AC 220 - 240V 50/60Hz
Output Power (RMS) : 50W (20W + 15W x 2)
2. 1 S p e a ker
RAINBOW
ZEB
R-81008850
www.bis.gov.in
IS 616 : 2017 /
IEC 60065 : 2014
ANTENNA
RISK OF ELECTRIC
SHOCK DO NOT OPEN
A C IN P O W E R
C A U T I O N
Audio Input and
Output Ports

Remote Control
Power : Standby ON/OFF
Numeric Pad (0-9) : To select direct tracks from USB and to
select two digits and above, by consecutively pressing
Vol+ : To increase the volume
Prev : To select the previous track in BT/USB or channels in
FM mode
Vol- : To decrease the volume
RPT : To Switch between REP ALL track or REP 1 track
Mode : Mode Selection(BT/AUX/USB/FM)
EQ : Equalizer
Play/Pause : To Play / Pause for current track
Next : To select the next track in BT/USB or channels in FM
mode
Mute : To Mute / Unmute for currently playing track
123
456
7 8 9
0
MODE EQ
RPT U/SD
SCN
VOL+
VOL-
MUTE / UNMUTE
POWER BUTTON
NUMERIC
BUTTONS
MODE SELECTION
REPEAT
EQUALIZER
USB/SD SCAN
PREVIOUS NEXT
VOLUME -
VOLUME +
PLAY/PAUSE

General Instructions
BT Mode:
Switch the speaker to BT mode, Scan for
nearby BT devices in your device. Tap on
“ZEB-RAINBOW“ to connect.
USB Mode:
Insert the USB flash drive to the speaker.
The speaker will detect the USB and the audio
files f r o m fla s h drive w i l l be p l a y e d
automatically. (This mode isn't selectable on
the speaker or remote control unless a USB
flash drive is connected).
Ensure that your USB flash drive contains
MP3 files (other file types not supported).
FM Radio:
Switch the speaker to FM mode. In FM
mode, press & hold the “Play / Pause” button
in the control panel to scan for the available FM
channels. Once the scanning is done, the
scanned channels will begin to play. The next
button or previous button in the remote or
control panel can be used to change the FM
channels.
AUX-IN:
The speaker can be connected to an
audio device using an RCA to 3.5mm cable.
Connect the one end of the cable to the
speaker and the other end to an audio source.

The tracks from the audio source can be heard
through the speaker.
ISO 9001:2015 Certified Company
www.zebronics.com