ZEEMR Q1 User manual

Q1
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch

2
English
3 –21
Čeština
22 –40
Slovenčina
41 –59
Magyar
60 –78
Deutsch
79 –97

3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
󲐜󲐝󲐞󲐟󲐠www.alza.co.uk/kontakt
✆[phone]
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

4
Safety Instructions
Read all of these instructions before you operate your projector and save for future
reference.
1. Read instructions
All the safety and operating instructions should be read before the appliance is
operated.
2. Notes and warnings
All notes and warnings in the operating instructions should be adhered to.
3. Cleaning
Unplug the projector from the wall socket before cleaning. Use a damp cloth for
cleaning the projector housing. Do not use liquid or aerosol cleaners.
4. Accessories
Do not place this product on an unstable cart, stand, or table. The product may fall,
causing serious damage to the product. Keep the plastic packing materials (from the
projector, accessories and optional parts) out of the reach of children as these bags may
result in death by suffocation. Be particularly careful around the small children.
5. Ventilation
The projector is equipped with ventilation holes (intake) and ventilation holes (exhaust).
Do not block or place anything near these slots, or internal heat build -up may occur,
causing picture degradation or damage to the projector.
6. Power sources
Check that the operating voltage of your unit is identical with the voltage of your local
power supply.
7. Servicing
Do not attempt to service this projector yourself. Refer all servicing to qualified service
personnel.
8. Replacement parts
When replacement parts are required, be sure that the replacement parts are specified
by the manufacture. Unauthorized substitutions may result in fire, electric shock or
other hazards.

5
9. Moisture Condensation
Never operate this projector immediately after moving it from a cold location to a warm
one. When the projector is exposed to such a change in temperature, moisture may
condense on the lens and the crucial internal parts. To prevent the unit from possible
damage, do not use the projector for at least 3 hours when there is an extreme or
sudden change in temperature.
Appearance Introduction
1. Lens
6. Earphone interface
2. Air outlet
7. HDMI interface
3. Camera
8.USB interface
4. Air inlet
9.Infrared remote control receiving
window
5. DC interface
10.Power button

6
Remote Control
Item
Description
1
Power
Turn the projector on or off
2
Number
Digital keys for ATV use
3
HDMI
Display HDMI signal
4
INFO
Display video format
information (under USB)
5
Volume
Adjust volume
6
TTS
Text to speech
7
Menu
Open the OSD
8
Up/Down/Left/
Right
Navigate and change setting in
the OSD
9
OK
Confirm selection
10
Back
Back to previous screen
11
Home
Return to home screen
12
NETFLIX
Open the NETFLIX screen
13
Prime video
Open the prime video screen
14
Red / Green /
Yellow / Blue
No function
15
Fast backward (under USB)
16
USB
Display USB signal
17
Fast forward (under USB)
18
Video
Display VIDEO signal
19
Mute
Mute the built-in speakers
20
Blank
Black out the display
21
Focus
Adjust the focal length
22
Signal source
Display selections of signal
source
23
Exit
Exit and save menu settings
24
YouTube
Open the YouTube screen
25
OPEN
BROWSER
Open the OPEN BROWSER
screen
26
Exit playback (under USB)
27
Music
Display the music screen
28
Continue or Pause playing
(under USB)

7
Projector Operation
Activate The Projector
First, find the standard 19V DC adapter enclosed with this product and connect it to the
DC port on the back of the projector. Next, plug the power cord at the other end into the
power supply port. After power-on, the indicator light of the power button on the top of
the body flashes in red. Press the power button, then the indicator light goes out, the
picture appears, and the machine starts to operate normally.
Image Focusing
This projector has the auto focus function, which can automatically adjust the focal
length according to the distance from the screen, so as to make the picture clearer; you
can also manually adjust the focus buttons “ , ” of the remote control to make the
picture clearer. (Do not block the camera during auto focusing)
Settings For First Boot
Please select your projection

8
Please select your language
Please select Region
Sign the commencing service agreement

9
Connect to the Network
Set up Netflix
The setup is completed

10
Settings For Signal Source Input
This projector supports the input of HDMI or USB signals.
(1) Connection with HDMI device:
Prepare an HDMI cable. Connect one end to the HDMI port of the projector and the
other end to the device (such as computer, HD player, DVD, etc.). Press "HDMI" button
or " " on the remote control and select the HDMI option to connect the cable.
(2) Connection with U disk:
After connecting the USB flash disk to the projector, the screen will display "New device
has been inserted". Press "USB" button or " " on the remote control and then select
the USB option to open the USB flash disk, then you can open the videos, audios,
pictures, texts and other files in it.
Press the " " button on the remote control to enter the signal source selection page as
shown below.

11
Main Menu Operation
Press the button on the remote control to open the OSD page, and the main menu
page will be shown as follows.
The main menu mainly includes 10 major modules, namely, “Setup”, “Picture Mode”,
“Audio”, “Projection”, “Network”, “Keystone”, “Zoom”, “Focus”, “Bluetooth”, “About”.
Description about the sub-menu “Setting”

12
Sub-menu
Options
OSD Language
Multi-language OSD selection
Time Setup
Set The Time Automatically / Date /
Time / Region / Use 24-hour format
Screensaver
Images/ Timer
Sleep Timer
Off /10 Minutes / 20 Minutes /
30 Minutes / 40 Minutes /
50 Minutes / 60 Minutes/
90 Minutes / 120 Minutes
Auto Sleep
Off / 30 Minutes / 4 Hours /
6 Hours / 8 Hours
USB Auto
Upgrade
Exit
Internet
Update Check
OK
Reset Default
Cancel / OK
Description about the menu “Picture Mode”
Sub-menu
Options
Picture Mode
Custom / Cinema / Sport / Vivid /
Hi-Bright / Standard
Brightness
0--100
Contrast
0--100
Saturation
0--100
HUE
-50--50
Sharpness
0—20
Gamma
Middle / Bright / Dark
Color
Temperature
User / Cool /Standard / Warm

13
Description about the menu “Audio”
Sub-menu
Options
Bass
0--100
Treble
0--100
Sound Surround
On / Off
Sound Style
User / Standard / Vivid / Sport
/Movie / Music / News
Digital Output Mode
Auto / PCM / Dolby Digital /
Dolby Digital Plus
TTS
Switch / TTS Voice / Volume /
Speed / Focus Speech Audio /
Pitch / Verbosity
Dialogue Enhancement
Off / Low / Medium / High
Description about the menu “Projection Mode”
Sub-Menu
Options
Projection
Front Table / Rear Table / Rear Ceiling /
Front Ceiling

14
Description about the menu “Network”
Sub-menu
Options
Internet Connection
On / Off
WLAN On Wlan
On / Off
Wi-Fi
Manual Input / Available Networks
IP Prefer
IPv4 / IPv6
Information
Address Type / IP Address / Subnet Mask/
Default Gateway/Primary DNS/
Secondary DNS / SSID / BSSID
IP Setting
Address Type / IP Address / Subnet Mask/
Default Gateway / Primary DNS /
Secondary DNS
Connection Test
IPv6 Information
Address Type / IP Address /
Length Of Prefix / Default Gateway /
DNS Type / Primary DNS/
Secondary DNS / SSID / BSSID
IPv6 Connection Test

15
Description about the menu “Keystone”
Sub-menu
Options
Auto Keystone
Auto Keystone
Four Point
Correction
Adjusts position /
Change the next point /
Reset to default / Exits
Advanced
Auto Keystone
Trapezoidal distortion refers to the problem that the projected image has a shape of
trapezoid due to the poor projection angle. To correct this problem, you should adjust
the projector height and use the keystone function to adjust and normalize the picture.

16
Description about the menu “Zoom”
Sub-menu
Options
Adjust
Press the up and down button to adjust
Save And Back
Save And Back
Reset
Reset screen to 1：1 size
The Zoom function can zoom the screen to 75-100%. You can press the Up and Down
button son the remote to resize the picture.
Description about the menu “Focus”
Sub-menu
Options
Auto Focus
Auto Focus
Manual
Focus
Press the up and down buttons
to focus
Advanced
Live Focus / Calibration Chart /
Auto Focus on startup

17
Description about the menu “Bluetooth”
Sub-menu
Options
Bluetooth
On / Off
Clear Paired Info
Clear Paired Information
Available Device
Display Available Device Name
Description about the menu “About”
Sub-menu
Options
Netflix
Terminate / ESN
Version Info
Model Name / Version / OTA
version / Serial Number
License Info
View Additional Details /
Accept
Device Name
Device Name
Note: This product is subject to continuous software optimization and update, which
may lead to differences between the menu page and the descriptions in the manual.
The operation mode may be changed due to changes in the interfaces and some
functions without prior notice.

18
Projection Image Size
Table of projection distances and dimensions:
Projection dimension
（inch）
Distance from Screen
(m)
Projection area
50
1.55
1.13*0.64
60
1.86
1.36*0.77
70
2.17
1.57*0.88
80
2.48
1.78*1.0
90
2.79
2.0*1.12
100
3.10
2.20*1.24
Note: The above data is for reference only. Please refer to the actual measurement.
These figures may have error due to differences in optical components. If you want to
install and fix the projector in one place, it is recommended that you take an actual test
for the projector to confirm the projection dimension and distance, and refer to its
optical properties before installation. This will help you find the most appropriate
installation location.
Specifications
Specifications
Product Name
LCD Projector
Revelation Principle
LCD
Adapter Power
19V,120W
Light Source
LED
Language
English
Resolution
1080P
Netweight
2.76kg
Product Size
206*160*234mm
Mode of operation
Remote Contral
Working Environment
0-35°C
Input Terminals
HDMI / USB
Output Terminals
Headphone sound output

19
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
•Using the product for any purpose other than that for which the product is intended
or failing to follow the instructions for maintenance, operation, and service of the
product.
•Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (e.g., during transport,
cleaning by inappropriate means, etc.).
•Natural wear and aging of consumables or components during use (such as
batteries, etc.).
•Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes such as used power
supplies, etc.
•If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.

20
EU Declaration of Conformity
Identification data of the manufacturer's / importer's authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440
Subject of the declaration:
Title: PROJECTOR
Model / Type: ZEEMR Q1
This equipment is in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU and Directive 2011/65/EU amended
(EU) 2015/863.
Prague, 24.08.2023