ZERO-X ZXM-AC1 User manual

USER MANUAL
Full HD Action Camera with 2” LCD Screen
ZXM-AC1

3
CONTENTS
1.0 INTRODUCTION..................................................................... 5
2.0 ABOUT THE ZXM-AC1 ........................................................... 5
3.0 WHATS IN THE BOX............................................................... 6
4.0 COMPONENTS....................................................................... 6
5.0 GETTING STARTED...........................................................................7
5.1 CHARGING THE BATTERY ..................................................... 8
5.2 MICRO SD CARD COMPATIBILITY........................................ 9
5.3 POWERING YOUR ZXM-AC1 ................................................. 9
5.4 FORMAT YOUR MICRO SD CARD......................................... 9
6.0 ZXM-AC1 CONTROLS AND FUNCTIONS 11
6.1 POWER ON / OFF BUTTON ................................................ 11
6.2 SHOOT / RECORD BUTTON ............................................... 11
6.3 ACCESSING SYSTEM SETTINGS......................................... 11
6.4 SETTING THE DATE & TIME ................................................ 12
6.5 AUTO POWER OFF............................................................... 13
6.6 SOUND................................................................................... 14
6.7 SCREEN SAVER...................................................................... 15
7.0 PICTURE SETTINGS .............................................................. 16

4
7.1 PHOTO MODE ...................................................................... 16
7.2 CAPTURE MODE................................................................... 17
7.3 DELAYED PHOTO ................................................................. 18
7.4 DATE STAMP.......................................................................... 18
8.0 VIDEO SETTINGS ................................................................. 19
8.1 VIDEO MODE ........................................................................ 19
8.2 PLAYBACK MODE ................................................................. 20
8.3 LOOP RECORDING............................................................... 21
8.4 DATE STAMP.......................................................................... 22
9.0 RESTORE DEFAULT SETTINGS ............................................. 23
10.0 FIRMWARE VERSION ........................................................... 24
11.0 WARRANTY.......................................................................... 25
12.0 NOTES.................................................................................. 30

5
1.0 INTRODUCTION
Thank you for purchasing the ZXM-AC1 action camera. Please read
through the User Manual before attempting to use the ZXM-AC1.
FEATURES
• 1080P Recording
• 2” Screen
• Waterproof Case
2.0 ABOUT THE ZXM-AC1
The Zero-X ZXM-AC1 shoots footage with dynamic realism, where action
is effortlessly captured into moments you can keep. The Zero-X ZXM-AC1
offers a range of accessories to create fully immersive footage. To learn
more about our extended accessory range and for details on stockists,
please visit the Zero-X website.
www.zero-x.com.au | www.zero-x.co.nz

6
3.0 WHATS IN THE BOX
4.0 COMPONENTS
1 x ZXM-AC1 Action Camera
1 x USB Charging & Data Cable
1 x Waterproof Casing
1 x Bike Mount
1 x Quick Release Mount
1 x 3M Adhesive Mount
1 x 3 Way Mount
1 x Frame Mount
4 x Straps
1 x Adapter Mount Metal Teether
2 x 3M Adhesive Pads
1. SHOOT / RECORD
Button
2. Micro USB Charging
Port
3. Micro SD Card Slot
4. LED Indicator Light
5. UP / DOWN Button
6. Power ON/OFF
Button
7. Battery Port
2
3
1
4
6
5
7

7
5.0 GETTING STARTED
CAUTION:
Before using your action camera please ensure you read and understand the
following product and safety precautions.
• Do not use the ZXM-AC1 in water without the waterproof case.
• Do not use the ZXM-AC1 with the waterproof case in water deeper than
30m.
• Always check the waterproof case seal is clean and free of debris before use
in water.
• Do not attempt to open the ZXM-AC1 camera or modify it. If the ZXM-AC1
has been tampered with the warranty will be void. Maintenance and repairs
should only be performed by Zero-X customer service representatives.
Please see the warranty at the end of this manual for more information.
• Do not handle or charge the ZXM-AC1 with wet hands unless it is enclosed
in its waterproof case. This will help avoid damage to your camera.
• Only recharge the ZXM-AC1 battery using the supplied USB cable.
• Do not use the ZXM-AC1 in temperatures that exceed 55°C.
• Do not drop, crush, pierce, bend, deform, microwave, incinerate or shoot the
ZXM-AC1.

8
BATTERY WARNING
Always charge the ZXM-AC1 using the provided USB Cable. If the ZXM-AC1
is not charged as directed in this manual, the battery may become damaged
and fail.
• Never dismantle the ZXM-AC1 or expose the internal battery cell.
• Do not dispose of the ZXM-AC1 in fire.
• Please dispose of the ZXM-AC1 mindfully and observe local regulations,
especially in regards to the safe disposal of the internal battery. Check your
local recycling facility for more information.
• Do not attempt to expose the internal battery cell.
• Only use a certified 5V 1A USB charger to charge the ZXM-AC1. Using non-
certified chargers could potentially damage the ZXM-AC1, or the ZXM-AC1
battery and void the warranty.
• Do not let the battery charge overnight.
• If the ZXM-AC1 appears to still need charging after three hours, temporarily
remove it from its charger as the battery may overheat. Let it cool down for
30 minutes and try charging again.
5.1 CHARGING THE BATTERY
We recommend that you fully charge your ZXM-AC1 before use. A full
charge will take approximately 2.5 hours using a 5V / 1A charger.

9
The LED light on the back of the ZXM-AC1 indicates the status of the
unit’s charging cycle. It will stay RED while charging. When the ZXM-AC1
is fully charged the LED light will turn OFF.
5.2 MICRO SD CARD COMPATIBILITY
The ZXM-AC1 requires a Micro SD Card (not included) to save
recorded files. We recommend that you use a maximum 32GB, Class
10 or higher Micro SD Card from a well known brand.
NOTE: There is only one correct way to insert the Micro SD Card into your
ZXM-AC1. It should easily slide in. Do not force the card into the slot
as it may damage the unit and the card.
5.3 POWERING YOUR ZXM-AC1
To power ON your ZXM-AC1 follow the below steps:
1. Insert the battery into the unit.
2. Press and hold the POWER ON / OFF Button on the front of the
unit, until the start up screen appears.
5.4 FORMAT YOUR MICRO SD CARD
We recommend that you format your Micro SD card before you start
using the ZXM-AC1. You can do this via the ZXM-AC1, by following
these instructions:

10
1. Once the ZXM-AC1 is fully charged insert your Micro SD Card into
the correct slot (See 4.0 COMPONENTS).
2. Press the POWER ON / OFF Button on the front of the unit to turn
ON the ZXM-AC1.
3. Quick press the POWER ON / OFF Button four times on the front
of the unit. This will bring you to the Settings menu. Each press will
navigate through Video, Image, Playback and Settings.
4. Press the UP Button four times on the right side of the unit to
navigate up the Settings menu to “Format”.
5. Press the SHOOT / RECORD Button to open the Format section.
6. Press the DOWN Button to navigate to ‘OK’, then press the
SHOOT / RECORD Button again to click ‘OK’. This will initiate the
formatting of the Micro SD card.
NOTE:
Formatting the Micro SD card will permanently erase all data stored
on the Micro SD card. We recommend you back up your data before
formatting.