Zest 4 Leisure Abbey Table User manual

Assembly Instructions
(W x D x H) 1.20m x 1.20m x 0.74m
Product Name: Abbey Table
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THESE INSTRUCTIONS
Zest4Leisure
01352 752555 option 1 –[e-mail]
V3-10.15

Abbey Table Assembly Instructions
Requires 2 person assembly.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction.
Abbey Table Pack List
Item Description Quantity
A Horizontal Bracing 2
B Leg 4
C Diagonal Bracing 2
D Table Top 1
Fixings
Bolts, Nuts & Washers 8
70mm Screws 14
50mm Screw 1
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Assembly requires 2 persons.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction.
Abbey Table is now complete.
1. Attach Horizontal Bracing A to 2no Legs B using 2no 70mm Screws per Leg
ensuring screws avoid bolt holes (Fig.1).
Repeat process for remaining Horizontal Bracing and Legs.
2. Interlock Diagonal Bracings C and fix using 1no 50mm Screw (Fig.2).
3. Attach Diagonal BracingAssembly to legs using 1no 70mm Screw per Leg and at
a height of 350mm (nominal) (Fig.3).
4. Locate Table Top D to Leg Assembly as shown in Fig.4a.
Align bolt holes and insert 2no bolts per Leg (Fig.4b), attach nuts and washers to
bolts and fully tighten (Fig.4c).
Attach Horizontal Bracing A to Table Top D using 1no Screw per Bracing (Fig.4d)

www.zest4leisure.co.uk
21
3
4d
4a
4b 4c